there's a phrase that goes here

Here is what the backside looks like. OP notes this takes more fabric than paper piecing, but that excess fabric makes it already triple-layered. Besides not needing backing fabric, I don't think you'd need batting for this quilt at all. It's already thick and soft just from folding all that fabric into a hexagon.

Each hexagon begins as a 6" circle. camelscrafts does this by creating a paper template using a compass. According to the video, a 6" circle will create a hexagon that is 2.5 inches tall.

These hexagons are hand-sewn. Thread the needle.

With the fabric right side facing, find the center of the circle by folding it in half right sides together, then folding it in half again (wrong sides are facing). The top of the triangle shape is the center of the fabric circle.

Make a small stitch into the center of the fabric. The wrong side is still facing.

Unfold the circle. There will be a small stitch in the center.

Now the hexagon is created by folding the circle into itself: Take the needle to one of the edges of the fabric (it doesn't matter which one). Pull the needle through and pull the thread tight. This will fold down the fabric and create an edge of the hexagon. Crease the fold with your finger.

This fold has two corners, one at the top and one at the bottom. Put the needle into one of the corners and pull the thread taut. This will create another fold.

Continue this going around the circle until all of it is folded down, creating the hexagon. camelscrafts notes that the last corner pulled in may be a little bit "wonky" (no precise point in the corner) if the corners were not done precisely. However, that corner is pulled into the back, so is not visible from the front.

The hexagon is now formed. Sew around the folds in the middle of the circle to hold the folds in place. Tie off and cut the thread.

For personal context, before I went to the '98 Burning Man festival, one of the things I'd read from a couple different journalists was that "everybody" runs around naked. Which, fine by me, I'd already spent a lot of time in clothing-optional spaces, I'm not fanatic about it but it's nice.

So I got there early and set up a public shade structure on one of Black Rock City's main roads and spent most of each afternoon just watching the crowds go by. I don't remember seeing more than one actually naked person the whole week. I think a topless woman passed by my intersection maybe every half an hour, sometimes once an hour. So why in the hell were people, normally pretty smart and observant writers, coming away with the impression that everybody was naked?

Then I remembered an unrelated passage from Joel Garreau's great book about the history of the outer-ring suburbs, Edge City. Mall developers told him flat-out that they tried to keep the crowds in their malls less than 5% black. Not because they themselves were racist, but because they had determined, experimentally, that if more than 5% of the people in the mall are black, the median white shopper will wrongly describe the mall as at least half black, as mostly black. And not a few of them would describe it, at 6% black, as a mall where "only black people go." Why?

Because, emotionally, they were still upset over the last one when the next one came into view.

People (even in relatively liberal intellectual communities) often traffic in this truism that our culture is 'oversexualized' and that sexually explicit content is EVERYWHERE. ALL THE TIME. It's inescapable, allegedly.

When in reality, every major social media website in existence is engaged in an all out war against the stuff. Credit card companies have attempted to refuse to process transactions based on people trying to purchase things like OnlyFans subscriptions. And SPEAKING OF ONLYFANS, that site recently went through a bunch of drama when it was considering trying to tamp down on the selling of sexually explicit content, when that is like minimum 90% of its total business.

While the MCU is a bit passe these days, it was once THEE global cultural juggernaut to end all juggernauts. And it is FAMOUSLY so aggressively devoid of any actual eroticism you'd be forgiven if you thought people in this universe are all created in science labs. (Everyone is beautiful and no one is horny, as the famous essay asserts)

Exact same with the Star Wars franchise. To such an extent that one of the most iconic and important characters in the whole thing (Anakin Skywalker) LITERALLY, canonically is a product of immaculate conception.

Capitalism is actually TERRIFIED of trying to sell us sex, and it shies away from it at almost all opportunities. (Why do you think Hollywood was so fucking blindsided by Heated Rivalry's unexpected success?) ALL the ads on porn sites are ads for other porn sites. Social media can't stop trying to free itself from the stuff completely. ALL THE MAINSTREAM AI COMPANIES (who are currently trying anything else they can think of to get people to use their products) ARE STAUNCHLY TRAINING THEIR MODELS OUT OF PROVIDING SEXUALLY EXPLICIT OUTPUTS (whether written or image-based).

Granted, you can of course still find plenty of sexually explicit content in internet and entertainment spaces if you intentionally seek it out. Plenty of it is out there, of course. But the notion that it permeates every corner of cultural world doesn't hold up to even a cursory level of scrutiny. Its ubiquity is radically overstated. You often have to navigate significant barriers to access sexually explicit content; it is often heavily targeted for censorship and, at minimum, it is often kept behind heavy structural partitioning.

In 2021, Swarovski (the company that makes the very sparkly crystals you see in certain jewelry, on figure-skaters' twinkliest outfits, on red carpet dresses), decided they didn't want the grubby fingers of small-time jewelers, clothing designers and costumers and crafters on their shiny beads and rhinestones anymore. They decided to limit their sales to "luxury" and couture creators, not girls who sell stuff on Etsy. The tenor of their press release on the subject was snide and insulting. Resellers (like your favorite bead shop) would no longer be allowed to carry their product; the average Jane on the street would not be able to purchase them. You could only get them if you had an authorized business agreement that bound you to very strict brand behavior. And those of us who still had good stock of the crystals would no longer be "permitted" to use the brand's name in our listings for sale.

Every bead shop and craft supply place and many, many small clothing makers--wedding shops, prom and dancing dress suppliers, the sort of salt of the Earth mom and pop time machines of shops that are the backbone of the field--scrambled to find something that could replace them. The last of the stock dwindled quickly, all of us grabbing what we could get while there was any chance of it, and then it was gone and we no longer had any access.

I was Big Pissed about it at the time. It was just so goddamn stuck-up, when wholesalers and indie jewelers had made them so much money, when some people I knew--when *I!*--had been brand-loyal for decades. But with no recourse, everyone pivoted fairly quickly, most of us to Preciosa Crystals. Those are Czech, quite sparkly, and considerably less expensive than Swarovski. The faceting method they use is different, but not worse; any differences are hardly noticeable when you're seeing them as a hundred pinpoints of light.

Well, out of nowhere, Swarovski just dropped this: https://www.harmanbeads.com/swarovski-brand-policy-update

"Effective June 1, 2026, Swarovski updated the distribution and brand usage policies introduced in 2021. Businesses may now purchase Swarovski Crystals without signing a Brand Control Agreement, and Authorized Distribution Partners may once again sell Swarovski Crystals to resellers, including bead stores and online retailers. Businesses may also use the Swarovski brand name when following Swarovski’s Proper Use Guidelines. Designers, manufacturers, artists, brands, retailers, and resellers are now eligible to purchase Swarovski Crystals through authorized distribution channels."

They want us back. A lot of the companies who could have kept a brand relationship with them also have swapped to Preciosa, over the last half-decade, in solidarity with indie creators and out of a sour awareness that it could be them, next. And it doesn't hurt that Preciosa was able to expand their line quite a bit now that everyone who wanted sparkle had no choice but to go to them.

And I'm not seeing nearly anyone who intends to return. The feeling is, "Y'all told us to fuck off! Off we fucked! And now, that's what you can do, too!" I'm seeing a lot of "How many of us did you stab in the back?" comments from the people whose money they're hoping to attract.

For everything we do here, please be sure to be careful with what you edit, and restart your computer to lock things in. If you don't have access to the Group editor, (likely to happen if you're on base windows) you can do this as well by opening your Registry Editor app, then inputting this after your 'computer' or whatever the initial segment is. (Mine is computer. If I just try and paste the below string it gets SO mad at me)

\HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\WindowsCopilot

Navigating to your "turnoffwindowscopilot", hit modify, and set the value data to 1.

If done correctly, it'll look like this.

While we're at it, you can also get rid of the integrated search, (or that thing where it searches the web when you search anything, whether or not you want it to) and such through regedit as well.

Integrated search will have you going to

HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Explorer

Navigate to your "DisableSearchBoxSuggestions" bit, if you don't see it, you can make it by right clicking and creating a new registry D-Word key of that exact name. Edit the key, set it to 1. It'll look like this if you do it right!

To get rid of Windows Spotlight, (The thing where it pulls up ten billion pages on windows start page, shoving ads in your face and cluttering everything) we go to

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\DesktopSpotlight\Settings

And set "Enabled State" To 0. If you do it right, it'll look like this!

Disabling edge on startup will also help a fair deal with processing speed and the like. This you can do in all sorts of ways, the easiest being turning it off entirely on startup through settings in the like.

If you want to kill it *entirely*, though? :)

In regedit, run along to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft

Navigate to your MicrosoftEdge key subcategory. If you don't see it, you can make one! Note, this is a KEY, not a d-word. *inside* that subcategory, we want to either make or find the D-Word key of PreventLaunchEdge and set that to 1 in the same way as all the others. It'll look like this.

Aaaand while we're here, I'd HIGHLY recommend shanking Killer Networking Services. It's just bloatware. (Ostensibly it's supposed to monitor your network bandwidth and even things out, but that really means it's constantly monitoring and pinging things, which eats up the bandwidth you DO get, and also chunks your computer's processing power.) Getting rid of it entirely is borderline impossible, since it's set to redownload on regular updates and intel is very pushy with its updates.

This you can do by opening your Services.msc, which basically shows you all the background stuff that Windows does. Find Anything with Killer in the name, right click it, go to properties, and disable startup. It should look like this, if done successfully. It will probably reenable itself in time/in later updates for windows, but it's a quick fix. I'd also check your TaskScheduler app to make sure that nothing's scheduled to open up there, either.

If you CAN completely kill Killer services through uninstalling and the like, I would warn that at very least for my computer, the only ethernet/lan support applications that are available ARE Killer's. When you download updates, you really do have to do it manually and ONLY download the ethernet services, or just be cool with not having Lan functionality.

One last thing, not a shit application but is a shit service. If your computer's constantly overheating or just warm, you likely have Turboboost enabled. (Default setting that you can't change) If you want to be able to turn it off and drop your temps by like 40 degrees, in Regedit go to

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00\be337238-0d82-4146-a960-4f3749d470c7

(Note- This isn't the string copy paste from the reddit thread, this is mine that does the same thing. If my string doesn't work for you, check the reddit thread string. If that doesn't work either, you can follow the path and find it pretty easily. Probably has like, one letter of difference somewhere. The bits all start the same, though, so it's easy to find.)

and go to "attributes". Set the value from 1 to 2, and now in your advanced Power Plan settings in control panel, you'll be able to *see* turbo boost and turn it off.

It'll look like this, and in power options, a successful disabling of boost should look like this.

Turning off quick startup's also a good call, since that basically stops your restarts from actually shutting things down properly.

There's well over a hundred settings, here's just a few of them:

(sorry the classic taskbar option no longer works with current windows 11 version)

Fair warning: This is a powerful tool which means it can also do some damage if you don't know what you're doing, but every setting comes with an extensive explanation, as you can see in the Ads and unwanted apps screenshot.