Kellie Cottle

The plan:

My plan is to laser cut each of the rings and the box (made out of timber as natural materials are better for children than man-made products such as plastic). These will first need to be drawn up on illustrator.

 After laser cutting all the pieces need to be fitted together and some elements 3d printed to hold the servos. For this project I have only used 1 servo to show the movement. It the actual design there will need to be 4 servos to move in all directions. 

I will then need to code the Arduino so that the microphone pics up the clapping sound and send it to the servo so that it can move in the appropriate way.

Testing! I will then need to test that the marble stays on the board.

After revising my design plan and talking to multiple people/various health services, I have decided to change my idea slightly to help educate young children on simple directions (left, right, up, down). Studies show that children by the age of 7-8years generally know the difference between left, right, up and down. Some however that have Left-right confusion may be related to certain learning and attention issues, difficulty understanding “left” and “right” can also affect math, reading, writing and motor skills. According to www.understood.com for learning and attention issues “Most children develop a firm grasp of “left” and “right” by age 7 or 8. As they get older, they can do more complex tasks that involve telling left from right. For some people, though, it never becomes second nature. In fact, a study of college-age students showed that 26 percent still struggled to some degree with the concept. “Left-right confusion” can be an isolated disorder. But it’s often related to certain learning or attention issues. These include dyslexia, dyscalculia, nonverbal learning disabilities and visual processing issues.”

Having a machine of sorts that gives a reward for learning these direction would give young children motivation to complete the task to see the outcome.

for project 3 we were asked to design/ build a proof of concept model. To be able to complete this task I first had to get tutor feed back about the previous project and slightly redesign/re construct my idea more in depth.

Outcome of testing

Experiment results for 1.0 gel ink (red):

ultra white 180gm- bleed and is still wet 

ultra white 250gm- hasnt dried and has bleed

ultra white 300gm-  bleed a little but is still wet to touch 

sugarcane paper- has not dried yet, paper is also damp, liquid bleed and the entire piece of paper was coloured, not just the controlled amount.

detail paper 60gm- still wet after 2 days, paper soaked up liquid and it became very britle

OHT plastic- not dry at all underneath it is still very wet

wet strength cartridge 230gm- damp to the touch, bleed

kraft paper 200gm- bleed heaps and is still damp to the touch paper soaked liquid fast

Experiment results for Paint + Water:

ultra white 180gm- dried fast and did not bleed. spread evenly 

ultra white 250gm- dried fast and spread evenly material density remaind the same

ultra white 300gm-  dried very fast and spread evenly

sugarcane paper- dried in a short amount of time however, the liquid bleed and the entire piece of paper was coloured, not just the controlled amount. 

detail paper 60gm- still wet after 2 days, paper soaked up liquid and it became very britle 

OHT plastic- not dry at all and did not sticksmall amount dried on the plastic but underneath it is still very wet 

wet strength cartridge 230gm- dried fast but bleed a little 

kraft paper 200gm- bleed heaps as was drying, paper soaked liquid fast

Experiment results for Paint:

ultra white 180gm- paint took a long time to dry, aslo dried in clumps.

ultra white 250gm- paint feels very powdery, some parts have dried in clumps whereas others have bleed through the paper.

ultra white 300gm- very clumpy and took along time to dry, not much different to the 180gm paper. 

sugarcane paper- paint is still wet after 2 days, paper has sucked up moisture and is now wet. 

detail paper 60gm- taking a long time to dry, some parts are still wet after 2 days. 

OHT plastic- not dry at all and did not stick

wet strength cartridge 230gm- took some time to dry, dried clumpy 

kraft paper 200gm- took some time to dry, dried clumpy and is still soft to the touch. 

mixing materials

Above image = Paper/Card/Plastic selection

Note: Each liquid that was selected will test 9 materials. these will be displayed on abase board with 9 pottles attached. Each pottle with have a small portion of paper/card/plastic. I will then (using a syringe) drop even amounts of the liquid into each pottle. I will leave them to sit for an hour to see the results and then record these.

Selection of paper/card/plastic materials:

Ultra White card 180gm

Ultra White card 250gm

Ultra White card 300gm

Sugarcane Paper

Detail Paper 60gsm

OHT plastic

Wet Strength Cartridge paper 230gm

kraft paper 200gm

Caseboard 1400mic 

Selection of liquids:

1.0 gel ink (red)

paint(non toxic, poster paint)