Welcome To Haomei Aluminum

The anti-slip logic of stair treads differs from that of flat platforms. Foot pressure is concentrated on the leading edge of the tread, and the force direction is fixed, requiring higher standards for localized wear resistance and anti-slip stability. The mainstream five bar pattern uses a circular arc rib structure arranged at a 45° angle to the length of the tread, with the rib height precisely controlled between 0.3-1.0mm. The dry static friction coefficient reaches over 0.62, and remains above 0.42 in wet conditions, meeting the general requirements for anti-slip safety in building floors. The lentil-shaped pattern, with its continuous arc-shaped guide design, can quickly drain rainwater, dust, and oil, preventing liquid accumulation on the tread surface and the formation of a slippery layer, making it more suitable for outdoor staircases. For the high-wear leading edge, customized thickened ribs and anti-slip teeth can be added to enhance the wear resistance of high-frequency trowel areas and extend the overall service life of the tread.

Different alloy selections are made for different usage scenarios, balancing performance and cost.

For light-load pedestrian staircases in indoor commercial buildings and office buildings, 1060-H24 or 3003-H14 aluminum checker plates are commonly used, with a thickness of 1.5-2.5mm. These plates offer high flatness and good formability, are suitable for various decorative surface treatments, and weigh only one-third of steel plates of the same specifications, eliminating the need for additional reinforcement of the staircase base.

For medium-to-heavy-load staircases in industrial plants and outdoor municipal passageways, 3003-H24 rust-resistant aluminum checker plates are preferred, with a thickness of 2.0-3.0mm. The manganese content provides excellent rust resistance and impact resistance, making them suitable for outdoor environments with alternating wet and dry conditions and industrial dust.

For highly corrosive environments such as coastal walkways and ship cabins, 5052-H32 magnesium-aluminum alloy aluminum checker plates are used, with a thickness of 2.5-4.0mm. These aluminum checker plates have a tensile strength exceeding 230MPa, excellent salt spray resistance, and can withstand long-term exposure to marine climates and high-humidity environments.

In terms of engineering adaptability, aluminum checker plates support CNC cutting to precisely match standard step widths of 200-300mm and common lengths of 600-1200mm, with dimensional tolerances controlled within ±0.2mm. Pre-fabricated installation holes, side folds, and rounded corners eliminate on-site cutting and grinding processes, significantly improving installation efficiency. The folded edge treatment increases the rigidity of the step structure by over 30%, resulting in no noticeable deformation or abnormal noise when stepped on, meeting the requirements of public buildings for quietness and comfort.

Compared to traditional step materials, aluminum stair treads do not require regular rust removal and painting. Under normal working conditions, their service life can reach over 15 years. After disposal, they can be fully recycled and reused, offering significant advantages in total lifecycle cost. As a professional aluminum checker plate manufacturer, we can customize patterns, alloys, and sizes according to project requirements. All products undergo flatness, anti-slip performance, and dimensional accuracy testing, meeting international engineering standards and adaptable to various building and industrial staircase projects worldwide.

Flat aluminum strips can be made from a variety of alloys to meet different performance and application needs. Common aluminum alloys include 1060, 3003, 5052 and others. These aluminum alloys have different mechanical properties, corrosion resistance and machinability, and are suitable for different industrial applications. For example, 3003 aluminum alloy aluminum strip has good formability, corrosion resistance, weldability, medium strength, and is used for aluminum products requiring a certain degree of strength and good processing performance, such as kitchenware, food and chemical product handling and storage devices, tanks and troughs for the transportation of liquid products, a variety of pressure vessels and piping processed in thin sheets, heat exchangers, rivets, welding wires, washing machine cylinders, and refrigerator liners.

The production process of flat aluminium strip mainly includes melting, casting, rolling, annealing and surface treatment steps: - Melting: High purity aluminum ingot or aluminum alloy ingot is melted in a high temperature furnace, and appropriate amount of alloying elements are added to obtain the required chemical composition and properties. - Casting: The melted aluminum liquid is passed through the casting machine into ingots. The quality of the ingot directly affects the subsequent rolling and annealing processes. - Rolling: The ingot is rolled through a number of rolling processes, such as primary rolling, intermediate rolling and finishing rolling, to gradually thin and reach the required thickness and width. The rolling process requires strict control of rolling speed, rolling force and rolling temperature to ensure uniform thickness and smooth surface of the aluminum strip. - Annealing: In order to remove the internal stresses generated during the rolling process and improve the plasticity and toughness of the aluminium strip, annealing treatment is required. The annealing process needs to be carried out at a specific temperature and time. - Surface treatment: Finally, surface treatment, such as cleaning, polishing, coating, etc., is carried out to improve the appearance quality and corrosion resistance of aluminum strip. Through the above production process, flat aluminum strips products with smooth surface and excellent performance can be produced. Aluminum flat strip is available in a wide range of thicknesses to meet the needs of different fields and applications. The common thickness range varies from a very thin 0.08mm to a thicker 3.2mm, and even thicker aluminum strips are produced. Different thicknesses of aluminum strip are suitable for different application scenarios, such as thin aluminum strip is commonly used in the manufacturing of electronics, while thicker aluminum strip may be used for construction or mechanical structural components. Aluminium flat strip with flat surface has a wide range of applications in several fields due to its excellent physical and chemical properties. The following are some of the major application areas: - Construction: Used in architectural curtain walls, ceiling suspended ceilings, decorative materials (such as decorative panels, partitions, doors and windows), etc. It provides beautiful, durable, corrosion-resistant decorative and structural materials. - Transportation Manufacturing: Used in the manufacturing of automobiles, trains, airplanes, and other means of transportation, utilizing its lightweight, corrosion-resistant, and easy-to-process features to reduce the weight of vehicles and improve fuel efficiency. - Electronic products: Due to its conductivity and plasticity, aluminum strip is also widely used in the manufacture of electronic products, such as the encapsulation of electronic components and the production of heat sinks. - Packaging industry: As a packaging material, it is used to protect goods from damages such as moisture and oxidation.

Aluminum parchment lined foil is a kind of composite material, which combines the excellent performance of aluminum foil and the strength and toughness of parchment, and is widely used in the fields of packaging, food, medicine and so on.

The alloys usually used for parchment lined aluminum foil are mainly 1060, 1235 and 8011. These aluminum alloys have good ductility and corrosion resistance and are suitable for food and pharmaceutical packaging. In terms of condition, aluminum foils are generally in the soft state (O state) to facilitate subsequent processing and forming. The thickness of aluminum foil is usually between 0.01mm and 0.2mm, and the specific thickness can be customized according to customer requirements. The thickness of parchment lined is usually between 80g/m² and 300g/m², and the total thickness after lamination will be different according to the ratio of the thickness of aluminum foil and parchment. As for the width, the width of aluminum foil laminated parchment can be customized according to the specifications of the production line, and the common width is 30cm to 150cm.

Aluminum parchment lined foil offers a number of performance advantages:

– Excellent barrier property: Aluminum foil can effectively block moisture, gas, light, etc. to protect the products inside the package and extend the shelf life.

– Corrosion resistance: aluminum itself has good corrosion resistance, suitable for use in humid or acidic and alkaline environments.

– Good mechanical strength: Parchment itself has high strength and toughness, and the composite enhances the overall durability.

– Printability: Smooth surface, easy to carry out a variety of printing processes, convenient for brand promotion and information transfer.

– Environmental friendliness: Pparchment, as a natural material, has better environmental protection characteristics and meets the needs of modern sustainable development.

Parchment lined aluminum foil is widely used in many fields, including but not limited to:

– Food packaging: used for packaging of dried fruits, candies, pastries and other foods, which can effectively maintain the freshness and taste of the food.

– Pharmaceutical packaging: used for the outer packaging of medicines, providing good protection against moisture and oxidation.

– Daily necessities packaging: such as cosmetics, detergents and other products packaging, both beautiful and practical.

– Industrial use: as a protective layer for industrial materials to prevent the external environment from affecting the products.

Aluminum parchment lined foil is a composite material with multiple advantages. With its excellent performance and wide application prospects, it has become an important choice for the modern packaging industry. With the increasing awareness of environmental protection and the continuous development of technology, the market demand for aluminum foil laminated parchment is expected to grow further.

Color coated aluminium foil is a kind of aluminum material with organic coating on the surface of aluminum foil, which is widely used in food packaging, household and container making. Color coated aluminum foil is available in a variety of alloys, with commonly used alloys including 3003, 3004, 8011, and so on. These aluminum alloys have different physical and chemical properties, such as corrosion resistance, strength, processability, etc., to meet the needs of different application scenarios. The state of color coated aluminum foil usually refers to its form after processing or treatment. Common states include H14, H16, H18, H22, H24, etc. These states indicate the degree of hardening and ductility of the aluminum foil during processing. In the case of color coated aluminum foil, the selection of the state depends on the subsequent processing and usage requirements.

Thicknesses of color coated aluminum foils are generally in the range of 0.01mm to 0.2mm, commonly used thicknesses range from 0.02mm to 1.2mm. The choice depends on the application requirements. Colored aluminum foils are available in a wide variety of colors and can be customized according to customer needs. Common colors include silver, gold, blue, red, green, white, etc. These colors are not only beautiful and generous, but also meet the decorative needs of different application scenarios.

Color coated aluminum foil has many performance advantages:

– Lightweight: the low density of aluminum reduces the overall weight of the product.

– Corrosion resistance: The coating provides excellent protection against corrosion and extends service life.

– Aesthetics: Rich color choices and gloss enhance the appearance of the product.

– Good moldability: easy to process and mold, suitable for various complex designs.

– Good insulating properties: suitable for electrical insulation materials.

Color coated aluminum foil is widely used in many fields:

– Food packaging, providing excellent sealing and moisture resistance.

– Sweets and chocolates packaging.

– Color coated aluminum foil containers.

In conclusion, with its excellent performance and wide application prospect, color coated aluminium foil has become one of the indispensable materials in modern industry and daily life. When choosing color coated aluminum foil, companies should consider factors such as alloy type, coating color, thickness and width according to specific needs to ensure that the performance and aesthetic requirements of the product are met.

China aluminum coil factory is specializing in the production of aluminum coil products, aluminum coil is widely used in construction, transportation, electronics, packaging and many other fields. Haomei Aluminum is one of the top aluminum coil factories in China, the aluminum coils product we can produce covers 1000 series, 3000 series, 5000 series, 6000 series and 8000 series, and thickness range from 0.1 to 3.0mm, width range from 500 to 1500mm. The aluminium coil products offered by Haomei Aluminum are all national standard production, no black lines on the surface, no color difference, flat plate.

Product range of china aluminum coil factory:

– Aluminum sheet, coil, strip (cold rolled, hot rolled)

– Embossed aluminum coil

– Aluminum coil for thermal insulation

– Color coated aluminum coil

Production strength of Haomei Aluminum:

– Has a number of advanced aluminum production lines

– Annual production capacity of tens of thousands of tons

– Passed ISO 9001 and ISO 14001 certification

– Strong technical R&D team capable of providing customized solutions

Aluminum coil products are used in a wide range of applications, including but not limited to the following:

– Construction field: used for building curtain walls, roofing, ceilings, partitions, etc.

– Transportation field: used in the manufacture and decoration of automobiles, high-speed trains, ships and other means of transportation.

– Power field: used in the manufacture of power equipment such as power transformers, capacitors, etc.

– Electronic field: used in the manufacture of electronic products such as capacitors and cell phone batteries.

– Packaging field: used in the packaging of food, medicine, cosmetics and other products.

When choosing a china aluminum coil factory, you can consider the following aspects:

– Product quality: high-quality aluminum coils should comply with relevant national and industry standards and have good corrosion resistance, strength and ductility.

– Production capacity: the manufacturer should have a certain production capacity to meet the demand for large-volume orders.

– Technical level: some large aluminum coil manufacturers may have advanced production equipment and technology to provide customized products.

– Service: Good after-sales service and technical support are also important factors in choosing an aluminum coil manufacturer.

– Price: under the premise of quality assurance, reasonable price is also an aspect to consider.

Anodized aluminum sheet for traffic sign is a commonly used material for making traffic and road signs because of its corrosion resistance, abrasion resistance, light weight and excellent visual effect. Usually, 1000 series or 3000 series aluminum alloy is used. 1000 series aluminum has higher purity and better corrosion resistance; 3000 series aluminum is added with manganese and other elements to improve strength, while maintaining good formability and corrosion resistance. H14 or H24 is more common tempers of anodized aluminum sheet for for traffic sign, H means hard state, and the larger the number means higher hardness. H14 is slightly hardened and suitable for applications requiring a certain degree of softness; H24 is fully hardened and suitable for applications requiring higher strength and hardness.

Anodized aluminum sheet for for traffic sign are generally available in thicknesses from 1.0mm to 3.0mm, depending on the size of the sign and the intended environment. For smaller or indoor use signs, thinner anodized aluminum sheets can be selected, while for larger or outdoor use signs, thicker sheets are required to ensure adequate strength and stability. For anodized aluminum sheets used to make traffic signs, the thickness of the oxide film usually needs to be determined according to the specific use environment and requirements. Generally speaking, the standard thickness of oxide film (such as 3μm) of anodized aluminum sheet can be used indoors for a long time without discoloration, corrosion, oxidation and rust. And for traffic signs that need to be exposed to outdoor environment for a long time, a thicker oxide film (e.g. 10μm or thicker) may be chosen to improve its weathering and corrosion resistance.

Below are some advantages of anodized aluminum sheet in traffic sign making:

When select anodized aluminum sheet for for traffic signs, the appropriate thickness and surface treatment are usually selected according to the function of the sign and the environment in which it will be used to ensure its readability and durability under various conditions.

The aluminum circle products can be divided into DC aluminum circle and CC aluminum circle according to the different processing method. DC aluminum circle (Direct Chill Casting Aluminum Discs) is a kind of aluminum alloy casting product, which is usually used to manufacture various aluminum products, such as pots and pans, electronic product shells, lamps and lanterns, packaging materials, etc. DC casting is an aluminum alloy casting process, which is characterized by casting the molten aluminum into semi-finished products in the form of flakes or discs by means of the direct cooling method.

DC aluminum circle is a high quality product compared with CC aluminum circle, is has features as following: - Excellent physical properties: DC aluminum circle has good mechanical properties and corrosion resistance, can be used in wet, acidic or alkaline environment. - Uniform organizational structure: Due to the rapid cooling of the aluminum liquid in the casting process, the formation of aluminum circles have a dense structure, fine grains and uniform distribution of grain structure, reducing the defects of aluminum alloy, improve the mechanical properties of the material and processing properties, such as strength and toughness. - Good surface quality: DC aluminum circles have a smooth surface with good appearance, which is suitable for subsequent processing and surface treatment. - Machinability: This kind of aluminum circle is easy to be machined, such as cutting, stamping, forming, etc., suitable for use in a variety of manufacturing processes. - Lightweight and high strength: Aluminum circle is lighter than many other metal materials, but with higher strength, so it is widely used in occasions where light weight and high strength are required. - Corrosion resistance: Aluminum circle has good corrosion resistance. The production process of DC aluminum circle usually includes the following steps: - Smelting: Melting the aluminum alloy raw material to form aluminum liquid. - Casting: The molten aluminum liquid is injected into the mold and solidified by cooling. - Cooling: During the casting process, the liquid aluminum is cooled directly by a stream of cooling water to form aluminum circles. - Cutting and processing: The cast aluminum circles are cut to the required size for subsequent surface treatment and processing. Among them, casting is a key step, which determines the organizational structure and performance of aluminum circles. In the casting process, the casting speed, cooling intensity and other parameters need to be strictly controlled to obtain high-quality aluminum circles. DC aluminum circles are widely used in the following fields: - Kitchenware: such as aluminum pots, aluminum plates and other cooking utensils. - Electronic products: for the shells and heat sinks of electronic components. - Lighting equipment: such as reflectors and housings for lamps. - Packaging materials: for food packaging, pharmaceutical packaging, etc. DC aluminum circle is a high-performance aluminum alloy material with excellent physical properties and processing performance, which is widely used in many industries. Its manufacturing process ensures product quality and consistency, and it is an important raw material for many aluminum products.

Pharmaceutical blister lidding foil for sale, also known as PTP aluminum foil, is a commonly used material in pharmaceutical packaging, it is widely used in the pharmaceutical industry, especially for blister packaging. The main function of blister lidding foil is to protect pharmaceutical products from moisture, oxidation and contamination during storage and transportation. Pharmaceutical blister lidding foils are widely used in pharmaceutical packaging, especially for blister packaging of solid preparations such as tablets, pills and capsules.

Pharmaceutical blister lidding foil are usually made of aluminum foil with a special protective layer and adhesive layer on the surface to meet the special needs of pharmaceutical packaging. Aluminum foil is usually 20μm to 40μm thick and has good barrier properties. Polymer layers such as polyethylene (PE) or polypropylene (PP) are used to enhance toughness and sealing properties. Pharmaceutical blister lidding foil are available in customized colors), with a flat, glossy surface and good printability. Pharmaceutical blister lidding foils are available in a wide range of sizes and specifications, which can be customized according to customers’ specific needs. Commonly used specifications include different thicknesses (e.g. 0.02mm-0.3mm), widths (e.g. 50mm-400mm) and lengths (customized according to requirements).

The main performance of blister lidding foil used for pharmaceutical including:

– Sealing performance: Pharmaceutical blister lidding foil has excellent sealing performance, which can effectively block the penetration of moisture, oxygen and other gases to ensure the dryness and freshness of the packaged items.

– Barrier performance: Aluminum blister foil material itself has good barrier performance, which can prevent the loss of medicine due to oxidation or pollution, thus ensuring the quality and validity of medicine. In addition, it can also prevent the drugs from being contaminated by external factors such as light, protecting the stability and activity of the drugs.

– High-temperature resistance: pharmaceutical blister lidding foil can withstand a certain high temperature, which is suitable for high-temperature sterilization and other treatment processes, ensuring the safety and hygiene of drugs in the packaging process.

– Corrosion resistance: Aluminum blister lidding foil material has good corrosion resistance and can maintain stable performance in humid, acid and alkali and other harsh environments.

– Printability: The surface of the pharmaceutical blister lidding foil is coated with a special primer system, which facilitates in-line and off-line printing, and can be easily printed with water-based and UV inks without fading after sealing. It can be printed on one or both sides according to customers’ requirements, offering a wide range of printing options to meet different packaging needs.

Advantages and features of blister lidding foil applied in pharmaceutical packaging industry are:

– Protecting the quality of medicines: The excellent sealing and barrier properties of pharmaceutical blister liddling foil can effectively protect medicines from external factors, ensuring the quality and expiration date of medicines.

– Improve production efficiency: pharmaceutical blister lidding foil has good processing performance and adaptability, which can meet the needs of high-speed pharmaceutical packaging line and improve production efficiency.

– Convenient to carry and use: pharmaceutical blister lidding foil is easy to carry and use, which can reduce the contamination of the drug in the process of carrying and taking.

– Enhance the image of drugs: pharmaceutical blister lidding foil can be customized printed according to customer needs, providing a variety of color and pattern options, which helps to enhance the brand image and market competitiveness of drugs.

In summary, pharmaceutical blister lidding foil for sale is a kind of pharmaceutical packaging material with excellent performance and wide application. It can effectively protect the quality of pharmaceuticals, improve production efficiency, facilitate portability and use, and help enhance the brand image and market competitiveness of pharmaceuticals.

Blue hydrophilic aluminum foil for air conditioner is a specially treated aluminum foil used primarily in evaporators and condensers for air conditioning and cooling equipment. The blue hydrophilic aluminum foil is based on high-quality aluminum and is precision machined. The surface is coated with a blue hydrophilic coating, which not only gives the aluminum foil a good visual effect, but more importantly enhances its hydrophilic properties and durability. The hydrophilic coating enables the surface of the aluminum foil to rapidly absorb and diffuse water, forming a uniform water film and optimizing the heat exchange process.

Blue hydrophilic aluminum foil for air conditioner are usually made of 3003 and 8011 aluminium foil, in O, H22, H24, H26 and other tempers. The thickness usually ranges from 0.08mm to 0.15mm, but the exact thickness may vary depending on the manufacturer, product line and air conditioning requirements. Some high-end air-conditioning products may use thinner foils, such as 0.06mm, to improve energy efficiency ratio.

The blue hydrophilic aluminum foil for air conditioner can be seen as a high end air conditioning aluminium foil because of the blue hydrophilic coating layer, its key features and functions include:

– Hydrophilic: The surface of the blue hydrophilic aluminum fin stock has been specially treated to make it more hydrophilic. This means that water molecules are able to diffuse and distribute more easily across the surface, forming a more uniform water film and thus improving heat exchange efficiency.

– Improved heat exchange efficiency: Due to the more uniform distribution of water molecules on the hydrophilic surface, the contact area between the air and the cooling liquid can be effectively increased, thus improving the efficiency of heat exchange. This is very important for improving the cooling effect and energy efficiency of air conditioners.

– Anti-corrosion: Hydrophilic aluminum foils usually also have certain anti-corrosion properties, which can extend the service life of air-conditioning equipment and reduce corrosion problems caused by moisture and humidity.

Blue hydrophilic aluminum foils are widely used in heat exchangers such as evaporators and condensers in domestic and commercial air conditioning systems, especially in high-efficiency refrigeration and air conditioning equipment. Heat exchangers with hydrophilic aluminum foil have better heat dissipation performance and corrosion resistance, enhancing the overall quality and reliability of air conditioners. Choosing high quality blue hydrophilic aluminum foil helps to improve the overall performance and efficiency of air conditioning equipment.

Aluminium chequer plate for tool boxes is a very popular material for industrial and household toolboxes because of its many advantages. Nowadays, many large trucks are using aluminium chequer plate to make toolboxes, which are mainly used for storing and carrying all kinds of tools, such as pliers, screwdrivers, hammers and so on. Meanwhile, due to its lightweight and high strength, it is also suitable for field work and rescue site. Aluminium chequer plate, with its excellent corrosion and wear resistance, has completely changed this situation. The unique pattern design on the surface not only increases the aesthetics, but also invisibly improves the structural strength of the material, effectively resisting external impacts and scratches, ensuring that the toolbox is still sturdy and durable in long-term use.

Aluminium chequer plate for tool boxes are usually made of aluminum alloy, and the common alloy series are 1xxx series, 3xxx series, 5xxx series and 6xxx series. Each of these aluminum alloy series has its own characteristics, such as 1xxx alloys with good ductility and corrosion resistance, while 6xxx alloys have high strength and good machinability. The specific alloy to be used needs to be selected according to the environment and performance requirements of the toolbox. Aluminium chequer plate for tool boxes is generally in the hot rolled state at the time of delivery, this state has better plasticity and processing performance, easy to subsequent forming and processing. At the same time, the hot rolled state also helps to maintain the internal organization of the aluminum plate uniformity and improve the overall performance of the toolbox product.

Generally, it is more common for the thickness of aluminium checker plate for toolboxes to range from 2.5mm to 8.0mm, but other thicknesses can be customized as needed. Thicker aluminum plates provide better load-bearing capacity and durability, while thinner aluminum plates are lighter and easier to carry. Aluminium chequer plate are available in a variety of pattern types, with common ones such as 5-bar, diamonf, and 3-bar.

Characteristics and advantages of aluminium chequer plate for tool boxes are:

1. Durability: Aluminium chequer plate has good strength and abrasion resistance, can withstand greater impact and pressure, suitable for storing and transporting various tools.

2. Lightweight: Aluminum is relatively lightweight, easy to handle and use, while not affecting the carrying capacity of the toolbox.

3. Anti-skid design: The surface design of aluminium chequer plate provides a good anti-skid effect, which reduces the risk of sliding during handling and use and increases safety.

4. Corrosion resistance: Aluminum has good corrosion resistance and can resist the erosion of humid environment and chemicals, suitable for use in a variety of working environments.

5. Aesthetics: Aluminium chequer plate has a unique appearance, which can increase the visual appeal of the toolbox and is suitable for various styles of design.

6. Easy processing: Aluminium chequer plate can be easily cut, welded and shaped, suitable for making toolboxes of different sizes and shapes.

Common applications of aluminium chequer plate for tool boxes:

- Portable tool box: used for storing and carrying various hand tools and power tools.

- Mobile tool trolley: Patterned aluminum sheet can be made into a tool trolley with wheels, which is easy to move in the workplace.

- Professional tool box: suitable for storing professional tools in construction, machinery, automobile maintenance and other industries.

Aluminium chequer plate are the ideal material for making toolboxes because of their durability, lightweight, non-slip and aesthetics. Whether at home, factories or professional places, aluminium checker plate toolboxes provide good protection and convenient use experience.

Aluminium strip for cookie cutters has many superior properties. 1060, 3003 and 5052 aluminum are common alloys, generally in thicknesses ranging from 0.5mm to 1.0mm, and in widths and lengths that can be customized to meet actual needs. In addition, proper surface treatment can further improve the performance and life of the cookie cutters. Common alloy types of aluminium strip for cookie cutters: - 1060 Aluminum: Characteristics: High purity, good ductility and corrosion resistance, suitable for cold working. Applications: Suitable for simple shaped cookie cutters, especially where a good surface finish is required. - 3003 Aluminum: Characteristics: A small amount of manganese is added to improve strength and corrosion resistance while maintaining good formability and weldability. Applications: Widely used for making cookie cutters of various shapes, especially those requiring a certain degree of strength and durability. - 5052 Aluminum: Characteristics: Containing magnesium and silicon, it has high strength and good corrosion resistance, and is suitable for deep-drawing and bending processes. Application: Suitable for complex shapes of cookie cutters, especially those requiring high strength and corrosion resistance.

Specification of aluminium strip for cookie cutters: - Thickness: Common thickness: 0.2mm to 1.5mm, depending on the design of the mold and the usage requirements. Recommended Thickness: For most cookie molds, 0.5mm to 1.0mm is a common choice to ensure sufficient strength and ease of processing. - Width: Common widths: 10mm to 200mm, depending on the mold design and production volume. Customized width: Aluminium strips of different widths can be customized according to actual needs. - Length: Common length: usually supplied in rolls, the length of each roll can vary from tens to hundreds of meters. Customized length: Aluminium strips can be supplied in different lengths according to customers' specific needs. Surface finish of aluminium strip for cookie cutters: - Bright surface: Aluminum strips without any surface treatment, with a smooth surface, suitable for molds that require a high degree of finish. - Brushed surface: The surface is treated mechanically or chemically to make the surface brushed to increase friction and reduce sticking. - Coating: A layer of food-grade coating, such as Teflon (Teflon), is applied to the surface of the aluminum strip to improve anti-adhesion performance and high temperature resistance. Features of aluminium strip for cookie cutters are: 1. Lightweight and strong: Aluminium strip is lightweight, easy to handle, and has good strength to withstand repeated use without deformation. 2. Corrosion Resistance: Aluminum has good corrosion resistance and is suitable for use in wet kitchen environments without rusting or affecting the hygiene of cookies. 3. Easy to process: Aluminum strips can be easily cut, bent and shaped, making it convenient to make cookie molds of various shapes and sizes to meet different design needs. 4. Good thermal conductivity: the good thermal conductivity of aluminum enables the cookies to be heated evenly, ensuring better baking results. 5. Safe and non-toxic: aluminum material is safe, not easy to react with food, in line with food safety standards. 6. Easy to clean: Aluminium strips have a smooth surface that is easy to clean, making them suitable for use in making food-related tools and utensils. Common application of aluminium strip when applied to cutters: - Cookie cutting molds: It can be used to make various shapes of cookie molds, such as animal shapes, stars, flowers, etc. to increase the fun of baking. - Chocolate molds: Aluminum strips can also be used to make chocolate molds, due to its good thermal conductivity, it can make chocolate molding quickly. - Baking tools: such as cookie embossers and decorating tools. All in all, aluminium strip is the ideal material for making cookie cutters due to its lightweight, durable, easy to process and safe properties. Whether for home baking or professional baking, aluminum molds can provide good experience and results.

0.4 - 5.0mm aluminum sheet for cookware is the most widely used aluminum alloy products in kitchen cooking utensils, when it is used in kitchen appliances, the requirements for product quality and process are also more stringent, testing the aluminum sheet manufacturing enterprises to control the process and quality of the firm. Aluminum industry production of aluminum sheet, aluminum circle sheet products, specifications are complete, in addition to the conventional size, can provide 0.3 - 6mm aluminum sheet, the products are in line with RoHS and REACH environmental standards.

Aluminum sheet that can be used to make cookware are mainly as follows:

- 1060 aluminum sheet: Performance advantages: high plasticity, corrosion resistance, electrical and thermal conductivity, good elongation as well as tensile strength, able to meet the conventional processing requirements (such as stamping, stretching), high formability. Quality Requirements: Aluminum sheet should be free from obvious defects such as cracks, peeling, inclusions, bubbles, corrosion, indentation marks and scratches, and the surface should be clean, smooth and free from oil spots, scratches, dents, waves, pockmarks, indentation marks and other defects.

- 1100 aluminum sheet: Performance advantages: excellent ductility, formability, weldability and corrosion resistance; anodizing can further improve corrosion resistance while obtaining a beautiful surface. Quality requirements: similar to 1060 aluminum sheet, should ensure that no defects, clean surface, flat.

- 3004 aluminum sheet: Performance advantages: belongs to aluminum-manganese alloy, higher strength than 3003 aluminum sheet, excellent formability, good corrosion resistance. Cannot be heat-treated to strengthen, but mechanical properties can be improved by cold working methods. Quality requirements: need to meet the food grade material standards, corrosion resistance, safe for food contact. The surface should be flat and free of defects to ensure that no harmful substances are introduced during processing.

The thickness standard of aluminum sheet for cookware products is usually: - 1.5mm: commonly used for making light cookware, such as pans and frying pans. - 2.0mm: applicable to ordinary stewing pots, steamers, etc. - 2.5mm: suitable for large stew pots, soup pots, etc.

Common aluminum cookware includes: - Aluminum pots and pans: for stir-frying, cooking soups, etc. Aluminum baking pans and bakeware: for baking and roasting food. Aluminum utensils: such as plates, bowls, etc. Aluminum food storage containers: for preserving food.

Quality requirements of aluminum sheet for cookware are: - Material purity and composition: ensure that the alloy composition meets the standard and is free of impurities. - Mechanical properties: to meet the required tensile strength, elongation and other mechanical properties indicators. - Surface quality: no cracks, peeling, scratches, dents and other defects, clean and flat surface. - Corrosion resistance: good corrosion resistance, especially in contact with food and cleaning agents. - Safety: need to comply with food safety standards to ensure that no harmful substances are released into food.

Please note that aluminum sheet for cookware from different manufacturers and brands may vary in composition, performance and thickness, so they should be selected according to specific needs and product specifications in actual applications.

CTCP plate developer is a chemical liquid used in CTP plate making process, mainly used for developing printing plates, removing unexposed photographic materials, and forming graphic parts that can be used for printing. The plate developer usually contains water, alkaline substances (such as sodium hydroxide), solvents, surfactants and additives, etc. The selection and quality of the CTCP plate developer has a significant impact on the printing quality and plate making efficiency.

HC is a manufacturer of CTCP plate developer, offering a wide range of plate developer for its CTCP plates and UC CTP plates, characterized by high efficiency development, good stability, suitable for high quality printing needs. Environmentally friendly formula, good compatibility with printing plates, even development, reduced scrap rate, suitable for high productivity environment.

Product Name: CTCP Plate Developer

Main ingredients: water, sodium hydroxide, surfactant

pH value: 11.0

Appearance: Transparent light yellow liquid

Density: 1.05 g/cm³

Developing time: 60 seconds

Dilution ratio: 1:4

Use temperature: 20°C-25°C

Storage conditions: cool and dry place, avoid direct sunlight

Shelf life: 12 months

Main components and characteristics of CTCP plate developing solution:

- Alkaline component:

Sodium hydroxide (NaOH): a commonly used alkaline ingredient that helps dissolve unexposed photographic layers.

Sodium carbonate (Na2CO3): another common alkaline ingredient with low corrosive properties, suitable for certain types of printing plates.

- Surfactants:

Nonionic surfactants: help to improve the wettability and permeability of the developing solution, resulting in a more uniform development process.

Anionic surfactants: Enhance the cleaning ability of the developer to remove residues.

- Chelating agent:

EDTA (Ethylenediaminetetraacetic acid): used to chelate metal ions and prevent the influence of metal ions on the developing process.

- Stabilizers:

Inorganic salts: such as sodium sulfate (Na2SO4), help stabilize the pH and performance of the developer.

Organic acids, such as acetic acid, regulate the pH of the developer to keep it within the appropriate range.

- Preservatives:

Sodium benzoate: prevents the growth of microorganisms in the developer and extends the life of the developer.

Considerations when selecting a CTCP plate developer:

- Compatibility: Ensure that the developer is compatible with the CTP printing plate being used.

- Developing speed: Choose a product with fast developing speed to improve productivity.

- Environmental friendliness: Prioritize environmentally friendly formulations to reduce the impact on the environment.

- Stability: The chemical stability of the developer is critical to plate quality.

- Customer service: Choose a manufacturer with good customer service and technical support.

OPA/AL/PVC laminated foil is a multilayer composite material widely used for packaging in the food, pharmaceutical, and cosmetic industries. This composite material combines the advantages of each layer to provide excellent barrier properties, mechanical strength and processability.

OPA/AL/PVC laminated foil

Component Materials of OPA/AL/PVClaminated foil:

– CHARACTERISTICS: The OPA layer provides good mechanical strength and puncture resistance, as well as excellent gas and water vapor barrier properties.

– Application: This material is usually used for packaging that requires high strength and durability, and can effectively protect the food inside from the external environment.

– Characteristics: Aluminum foil layer has excellent barrier properties, which can effectively isolate light, oxygen and moisture, preventing oxidation and spoilage of food. As an intermediate layer, it provides excellent barrier performance to ensure the freshness and safety of the contents.

– Application: Aluminum foil layer is commonly used to package food products that are susceptible to oxidation, such as dried fruits, coffee, spices, etc.

– Characteristics: PVC layer provides good sealing, molding, heat sealing performance, softness, high transparency, and is usually used in the outer layer of packaging to increase the stability of the structure.

– APPLICATIONS: PVC layers are commonly used in bags, blister packs, etc. to provide additional protection and aesthetics.

Production process of OPA/AL/PVC laminated foil:

– Co-extrusion: Different materials are extruded simultaneously through a multi-layer co-extruder to form a multi-layer structure.

– Laminating: Different materials are laminated together by adhesives or other methods to form composite materials.

– Printing and Coating: Printing and coating as needed to increase the aesthetics and functionality of the package.

Advantages of OPA/AL/PVC laminated foils:

– Excellent barrier properties: this composite material effectively blocks moisture, oxygen and light, extending the shelf life of food products.

– Good mechanical properties: combining the advantages of the different materials, it has a high resistance to tearing and puncture, making it suitable for a wide range of packaging formats.

– Good heat sealing properties: ensures that the package is hermetically sealed and prevents leakage.

– Suitable for a wide range of packaging needs, from simple bagging to complex multi-layer packaging

– Versatility: suitable for a wide range of food packaging, but also can be used in other areas such as pharmaceuticals and cosmetics.

– Customizability: Different combinations of thickness and structure are possible according to customers’ needs.

Application areas of OPA/AL/PVC laminated foil:

– Food Packaging: Used for packaging cookies, candies, nuts, coffee and other foods to maintain the freshness and taste of the food.

– Pharmaceutical packaging: used for packaging tablets, capsules, liquid drugs, etc., to ensure the stability and effectiveness of drugs.

– Cosmetic Packaging: Used for packaging skin care products, perfume, etc. to prevent product deterioration and pollution.

– Others: also used for packaging of medical supplies, electronic components and other fields.

When using OPA/AL/PVC laminated foil, you need to make sure that the material complies with food safety standards, especially in applications that come into direct contact with food, to ensure that no harmful substances are released.

Aluminium foil for lunch boxes is commonly used as the raw material for aluminum foil lunch boxes, mainly because it is lightweight, corrosion-resistant, has good thermal conductivity and excellent sealing properties. For aluminum foil for lunch boxes, common alloy states include aluminum foil made from raw materials of 3000 series and 8000 series aluminum ingots, which have good ductility, corrosion resistance and processability and are suitable for food packaging.

– 8011 aluminum foil: commonly used in food packaging, with good moisture resistance and air tightness.

– 3003 aluminum foil: moderate strength, good corrosion resistance, suitable for manufacturing aluminum containers and boxes.

The thickness of aluminium foil for lunch boxes generally ranges from 0.03mm to 0.20mm, depending on the design requirements of the product and the usage scenario. Thinner aluminium foil can reduce the weight of the package and lower the cost, but may require a more complex forming process; thicker aluminium foil has better strength and durability, but may increase the weight and cost of the package.

Characteristics of aluminum foil for food container:

– Moisture resistance: Aluminum foil can effectively insulate air and moisture to keep food fresh.

– Temperature resistance: Aluminum foil can withstand high temperatures and is suitable for heating and insulation.

– Lightweight: Aluminum foil is lightweight and easy to transport and use.

– Recyclability: Aluminum can be recycled and meets the requirements of environmental protection.

Application Scenarios of aluminium foil lunch box raw material:

– Take-away lunch boxes: Aluminum foil lunch boxes are usually used for take-away food, which can keep the temperature and freshness of the food due to its good sealing.

– Frozen food packaging: Aluminum foil can be used for frozen food packaging to prevent moisture and gas penetration.

– Hot food packaging: Aluminum foil lunch boxes are suitable for hot food packaging and can withstand high temperature heating.

When choosing aluminium foil as a raw material for lunch boxes, it is important to ensure that the aluminum foil used complies with food safety standards to avoid contamination of food. Usually, manufacturers need to obtain relevant food safety certificates, such as FDA or EU standards for food contact materials.

As environmental awareness increases, more and more companies are focusing on the use of sustainable materials, and aluminum foil is favored as a recyclable material. Meanwhile, with the rapid development of the takeaway industry, the demand for aluminum foil lunch boxes is also growing.

Blue painted aluminum sheet is a kind of aluminum alloy material with surface coating treatment, which has good aesthetics and durability, and is widely used in construction, decoration and industry.

Product specifications of blue painted aluminum sheets:

- Alloy type:

Blue coated aluminum sheet is usually made of various aluminum alloys, such as 3003, 3004, 5052 and so on. These alloys have good mechanical properties and corrosion resistance and are suitable for a variety of decorative and architectural applications.

- Thickness:

Blue painted aluminum sheets are available in a wide range of thicknesses, generally from 0.14mm to 1.5mm. For example, some product specifications include thicknesses of 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, and so on.

- Colors:

Blue aluminum sheets are available in a variety of blue color options including, but not limited to, navy blue, sky blue, light blue, and more. These colors can be customized according to RAL color cards or customer-specific requirements to meet different decorative effects.

Product advantages of blue painted aluminum sheets:

- Corrosion resistance:

The surface of blue coated aluminum sheets is specially treated to have good corrosion resistance, which can resist the erosion of many chemical substances and prolong the service life.

- Decorative:

Blue color coated aluminum sheet has bright color and high gloss, with good decorative effect. Its surface can be coated with various patterns and textures to increase the beauty and artistic sense of the product.

- Weather resistance:

After high-temperature baking, the color coated aluminum sheet surface color is stable, not easy to fade, and can maintain a bright appearance for a long time. At the same time, it has good weather resistance and can withstand harsh weather conditions.

- Strong mechanical properties:

Color coated aluminum sheet is made of high-quality aluminum and high-quality plastic, which has excellent mechanical properties, such as bending and compression resistance, under the action of adhesives.

- Good processing performance:

Blue color coated aluminum sheets are easy to process into various shapes and sizes to meet different architectural and decorative needs. At the same time, its surface is flat and smoothly painted, which is conducive to subsequent processing and installation.

Blue painted aluminum sheets are widely used in the following fields:

- Architectural decoration:

Used for building curtain wall, exterior wall decoration, roof decoration, etc., to enhance the aesthetics and durability of the building.

- Steel Structure Factory Building:

As the enclosure structure material of steel structure plant, it has the characteristics of light weight, high strength, corrosion resistance, etc.

- Thermal insulation field:

As the surface or composite layer of thermal insulation material, it improves the thermal insulation effect and beautifies the appearance.

- Billboards and signs:

Used for making all kinds of billboards and signs with eye-catching visual effect and long service life.

- Interior Decoration:

Used for indoor wall and ceiling decoration, creating a unique indoor atmosphere.

- Other fields:

Such as subway, submarine tunnel interior decoration, all kinds of airport decoration, all kinds of office furniture and civil furniture decoration.

Aluminum coil manufacturers in china have advanced production equipment, complete product specifications, good product quality and wide application scope. Haomei Aluminum is a member of the top aluminum coil manufacturers in China, with more than 20 years in the aluminum processing industry, Haomei have been a reliable aluminum product manufacturer.

China aluminum coil manufacturers are usually equipped with advanced aluminum coil production line equipment, including but not limited to casting mills, hot rolling mills, cold rolling mills, slitting machines, slitting machines, embossing machines, coating equipment, etc.. These equipments can ensure high precision, high efficiency and high quality of aluminum coils in the production process. In addition, some manufacturers have introduced automated control systems and intelligent testing technology to further enhance production efficiency and product quality.

The product specifications of aluminum coil manufacturers in china:

– Alloy

China aluminum coil manufacturers provide a wide range of aluminum coil alloys, commonly 1060, 1100, 3003, 5052, 6061 and so on. These alloys have different physical and chemical properties and are suitable for different applications.

– Thickness

Aluminum coils are available in a wide range of thicknesses, from ultra-thin (e.g. 0.15mm) to thicker (e.g. 300mm). Common thicknesses include 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm, etc. Specific thicknesses can be customized according to customer requirements.

Product advantages of aluminum coil manufacturers in china:

– Light weight and high strength: Aluminum coil has the characteristics of low density and high strength, which makes it able to reduce the weight and improve the use efficiency in the application.

– Corrosion resistance: After surface treatment of aluminum coil has good corrosion resistance, can resist the erosion of various harsh environments.

– Easy processing: aluminum coil has good plasticity and processability, can be easily cut, bending, welding and other processing operations.

– Aesthetically pleasing: Through surface treatment, aluminum coils can present rich colors and delicate patterns to meet different aesthetic needs.

– Environmental protection and energy saving: aluminum coil is a recyclable material with good environmental performance; at the same time, due to its light weight and high strength, it can reduce energy consumption in the application.

China aluminum coil manufacturers’ products are widely used in the following fields:

– Construction: used in building curtain wall, interior decoration materials (such as ceiling, partition), roofing and wall materials, etc.

– Transportation: used in the manufacture of automobiles, trains, airplanes and other means of transportation, especially the rise of new energy vehicles has promoted the application of aluminum coils in the automotive industry.

– Packaging: used in food packaging, pharmaceutical packaging and other fields, with good sealing, moisture resistance and barrier properties.

– Electronics: used in the manufacture of electronic products shells, heat sinks and other components to improve the thermal performance and stability of the product.

– Aerospace: plays an important role in the manufacture of aircraft, rockets and other aerospace vehicles to meet the requirements of lightweight and high strength of materials.

In addition, aluminum coils are also used in energy, chemical, metallurgy and many other industries, providing strong support for the development of modern society.