Why are planetary gearboxes preferred for servo applications?
The relationship between the load inertia and the motor inertia is a crucial component of system performance in a servo application, which is one in which a feedback device is utilised to manage the torque, position, or speed of a linear or rotational system. A reduced inertia ratio enhances system responsiveness by enabling the motor to more precisely adjust the load and prevent overshoot and oscillations. Adding a servo motor gearbox to the system can lessen the amount of load inertia reflected back to the motor if the actual inertia of the load cannot be adjusted (essentially, making it seem to the motor as if there is less inertia to be moved).
The system's inertia ratio can be significantly improved by adding a servo motor gearbox since it reduces the reflected load inertia (the inertia the motor "sees") by the square of the gear ratio. Additionally, gearboxes reduce the necessary motor speed while increasing the torque from the motor to the load by a factor proportional to the gear ratio. This allows for the use of a smaller motor in some circumstances while operating it at a faster, more effective speed.
Three different types of gearâplanetary gears, sun gear, and ring gearâare used by planetary gearboxes to transmit torque. The solar gear, which is located in the middle of the gear assembly, is driven by the associated motor. The sun gear and the ring gear are permanent and stationary inside the gearbox housing and engage with several planetary gears. The planetary gears spin on their own axes and revolve around the sun gear as a result of the sun gear's rotation. The output shaft is included within a carrier, which controls the planetary gears' locations.
Planetary designs offer large reduction ratios in a small overall package and are hence compact. Because of their small size and low inertia, servo applications benefit most from them because the inertia of the gearbox directly affects the inertia of the load that the motor must balance. As with other gearbox types, planetary gearboxes can be lubricated with either grease or oil, although the majority are lubricated with grease by the manufacturer and don't need to be re-lubricated or maintained for the duration of the gearbox's life.
