Steps to clean the PlayStation 5 to avoid overheating, and important tips to maintain it
Today, through this article, we will discuss the steps to clean the PlayStation 5 simply to preserve it for as long as possible, as it is the most problem that many users of the new Sony device suffer from, and we loved to share it with you.
Despite the technical development witnessed by electronic devices and with the discovery of professional solutions in the field of cooling, its first enemy is still the problem of high temperature in the basic parts âprocessorsâ, as it directly affects their performance and accelerates their exposure to damage over time, and console processor chips are one of the most Electronic parts that heat up permanently, depending on the many and permanent operations they carry out, and the narrowness of the cooling space that hinders the movement of air, so it is always necessary to avoid overheating of your device in order to maintain its performance and stability.
Sony has designed the Playstation 5 with very simple but smart touches at the same time, not only the ability to change the interface of the device but Sonyâs innovative layout through the smart design that facilitates the process of cleaning the device from accumulated dust.
When dismantling the main interface of the device, you can notice two holes that allow dust to be sucked from inside without having to open the device completely to clean it. Of course, this does not guarantee that the internal components of the device are completely free of dust, but it helps without a doubt.
First of all, we would like to make it clear that this method will be divided into three levels according to need, the easy and quick level of âroutineâ cleaning, then the medium level for those who have few to medium experiences in dealing with the dismantling of Playstation devices, and finally the advanced level that cleans The PlayStation 5 in detail and in full, and we recommend that the user be very experienced and knowledgeable to complete this.
Dust and dust suction device (if any).
Dust remover liquid (if available).
Tissue paper moistened with some alcohol.
We remove the PlayStation 5 ready cover as shown in the picture, and make sure that the cover should turn to the left while placing the part in this way, and gently with pressure to the top a little, the cover will move from its place and continue the same process to remove the other cover from the other side of the device.
As shown in the pictures below, the device will become like this from both directions âPicture No. 1 and Picture No. 2â, and from this point, you will have to deal carefully with the device and avoid falling or spilling one of the liquids on it, or dealing with it with excessive roughness.
Things have become clear to you now, and you will find in front of you an amount of dust and dirt accumulated through the ventilation holes and the ends of the device, so you will have to follow the next step.
The picture above shows how you will use a dry, clean brush to remove dust and sand stuck everywhere, and be careful not to get the dust inside and always try to take it out and wipe the device everywhere you can reach it except for the âinternal partsâ of course.
Also, make sure that the cover you removed does not contain dirt and dust stuck in it, and you can wipe it with wet or dry wipes.
You can use a small or medium-sized air pump to remove dust and sand stuck in the ventilation ports and easily accessible places in the cooling fan of the device.
Then now comes one of the most important steps that you must make sure to complete, which is to remove the dust and sand stuck in the two holes designated for collecting dirt, through a dust and dust suction device, or something similar to it, and you can also strive and use a manual method that you see fit yourself.
The âDust catcherâ designed by Sony and talked about when it reviewed the internal parts of the device for the first time last year, and it is two holes in which most of the dust, dirt and dust collect in order to reduce its accumulation on the ventilation areas, the heat sink and the cooling fan, which are shown in the picture below.
An important last step is to turn the device over as shown in the image below, and use a dust and dust suction device or use dry tissues to remove dirt on the USB, HDMI, and Internet cable ports, and the ventilation holes that appear in front of you.
Here we have completed the fastest and safest way to clean the PlayStation 5, which is used most of the time, and if the dirt is more than expected, and this quick method will not work with it, you can now follow the âmedium-levelâ method, which is as follows.
Dust and dust extraction device.
Dust remover liquid (if available).
Tissue paper moistened with some alcohol.
First of all, in this method, you will have to start using the first method â Quick and Easy Level â and complete it as shown in the pictures above, because the three steps are completely linked to each other, and each one is considered complementary to the other.
Weâll go a little deeper in trying to clean the device, this one time by removing all the dirt and dust stuck in the cooling fan, and because it is the main factor in maintaining the stability of the temperature of the internal parts via the âlarge heat sinkâ that is characteristic of the PlayStation 5, and cooling the integrated CPU APU.
Therefore, the accumulation of dirt will lead to a slowdown in the fan speed, and neglecting it will lead to closing the vent holes with time. The two pictures below show the locations of the screws and the cable that connects them to the panel.
After removing the fan with a screwdriver, use the brush to clean the stuck dirt, and try hard not to put too much pressure on its balance, and avoid using liquids so as not to leak into the electromagnetic field responsible for its rotation, as shown in the image below.
After completing the cleaning of the fan, and through the two pictures below, note well how it is possible to find some dust and dirt stuck in those narrow places as shown in the picture on the right, which you must clean with a dust removal device or a dry tissue, and the picture on the left will see the appearance of part of the fan. A heat sink that you can clean part of with a dust extractor and very carefully.
âOriginalâ liquid for cleaning electronic parts, preferably âWD-40â
Dust and dust extraction device.
Dust remover liquid (if available).
Tissue paper moistened with some alcohol.
After making sure to follow the previous two stages, this stage will come that needs a lot of experience in order to start it, and it will certainly void the warranty of your device, and we do not recommend in any way to use this method except in the case of necessity, such as the device temperature rises dramatically Continuous, despite following the previous steps with a decline in the performance of the device, and here it is better to go to the maintenance center âthe authorized agentâ or an expert in this field.
You will have to completely disassemble the PlayStation 5 parts, as you will see in the pictures below, and professionally clean each piece, individually and carefully, using special tools such as the ones we mentioned above, and you can follow the TronicsFix channel on YouTube to see the method in full.
A set of important tips to avoid overheating your PlayStation 5.
Always make sure that the device is not surrounded by obstacles such as the âwall or cabinetâ in all directions, especially in the direction of air exit.
Do not place the device in a confined or restricted space. Do not allow dust to build up in or around the PS5 vents.
Make sure the vents on the sides and back of the PS5 are not clogged or obstructed. Ensure that there is at least 10 centimeters of free space around each side of the appliance.
Do not place the device on a carpet or rug with long fibers.
Make sure that the wires and sockets that you have are firm and well connected, and use the original types of electrical connections, and do not make the wires wrapped around each other.
Avoid leaving the windows open all night or when you are not in the room, and this is especially true in desert areas that are famous for sandstorms from time to time.
Do not leave the Playstation 5 running for long periods of time unnecessarily, and make sure to turn it off when you do not need it, and avoid using sleep mode continuously in case you do not need it.
Ensure the position of the device, whether standing or sitting, in terms of levelness and stability.
Never put covers on the device or above or below the deviceâs cabinet âI hope that one of the mothers will hear meâ
Ensure that the electricity in the device room or at home is stable and suitable for the carrying capacity of the device.
Always unplug the PS5 power cable from the back of the device before cleaning.
In the end, we at VGA4A want to help and encourage you to clean your device periodically in order to preserve it, but we do not bear any responsibility for disassembling your device in a wrong way or using inappropriate tools, and we strongly advise you to go-to specialists in this field so as not to cause accidents and damages.
