AZ LIGHTING TECHNOLOGY CO., LTD

Overview of 1000W Grow Light Electronic Ballast

Drives HPS and MH 1000W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

 The Details of 1000W Grow Light Electronic Ballast

1. Converts between HPS and MH lamps automatically by microprocessor

2. Adjustable knob for easy switch to different powers as needed

3. Ventilation opening for heat dissapation

4. 8 Feet heavy-duty power cord included

  The Advantages of 1000W Grow Light Electronic Ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan

2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch

3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max

4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

 The Specification of 1000W Grow Light Electronic Ballast

 Installation & Application Notes of 1000W Grow Light Electronic Ballast

1. Max.allowable case temperature: 75°C/167 °F.

2. Ambient Temperature: -20°C~ + 40°C/-4°F ~ +104°F.

3. Max.Humidity: 95%.

4. Ignition voltage is 5kV.

5. Remote Mounting: 15m/50ft.

https://www.azgrowlight.com/products/high-efficient-1000w-grow-light-electronic-ballast.html

Overview of 630W CMH Grow Light Fixture

Runs 2pcs of 315W CMH lamps

High efficiency electronic ballast

Works on 120V/240V

High output and improved spectrum

Warranty: 3 years

ETL certified

 The Details of 630W CMH Grow Light Fixture

German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with two pcs of ceramic metal halide 315W lamp

Two pcs of 315 cosmo lamphoders

Matched power cord included

 The Advantages of 630W Grow Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

 The Specification of 630W CMH Grow Lamps Fixture

Performance

Lamp

Number

2

Watts

315W

InputVolts

240V

Input Current

2.86

Input Power

686W

Min Power Factor

0.95

THD

<15%

Crest Factor

<1.7

Performance Requirements

Rated mains voltage:

240V

Voltage range (+/-10%):

216-264V

Mains frequency:

50/60HZ

Operation frequency:

140-220HZ

 The Application of 630W Ceramic Metal Halide Grow Light Fixture

Commercial Greenhouse for flowers to extend the time of growth by providing supplemental light when there's no enough natrually occuring light. The flowers look glossier and more vivid with the application of 630W CMH grow light fixture.

  https://www.azgrowlight.com/products/630w-cmh-grow-light-fixture-120v-208v-240v.html

Performance Data of 630W Ceramic Metal Halide Lamps

 The Application of 630W Ceramic Metal Halide Lamp

Ideal for horticultural lighitng, good for both vegetative and bloom stages

https://www.azgrowlight.com/products/630w-ceramic-metal-halide-lamps-with-high-par-valu.html

Overview of 600 watt Grow Light Ballast

Drives HPS and MH 600W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

 The Details of 600W Grow Light Electronic Ballast

1. Converts between HPS and MH lamps automatically by microprocessor

2. Adjustable knob for easy switch to different powers as needed

3. Ventilation opening for heat dissapation

4. 8 Feet heavy-duty power cord included

 The Advantages of 600W Grow Light Electronic Ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan

2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch

3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max, quality

4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

 The Specification of 600W Grow Light Electronic Ballast

 Installation & Application Notes of 600W Grow Light Electronic Ballast

1. Max.allowable case temperature: 75°C/167°F. 2. Ambient Temperature:-20°C~ + 40°C/-4°F ~ +104°F . 3. Max.Humidity: 95%. 4. Ignition voltage is 5KV. 5. Remote Mounting: 15m/50ft.

https://www.azgrowlight.com/products/600w-grow-light-electronic-ballast.html

Performance Data of 315W Ceramic Metal Halide Lamps

Initial Lumens

33000

Lm

Rated Average Life

10%Failure @12000hrs

Correlated Color Temperature

3100

TO

Color Rendering Index

90+

 Operating Position

U

 PPF Value

620

μmol/s

 Electrical Characteristics of 315W Ceramic Metal Halide Lamps

Nominal Lamp Wattage

315

IN

Nominal Lamp Voltage

100

V

Nominal Lamp Current

3.15

A

 Physical Description of 315W Ceramic Metal Halide Lamp

Max. Overall Length

193

mm

Light Center Length

89

mm

Bulb Diameter

38

mm

Outer Bulb Designation

T38

Outer Bulb Material

Quartz

Inner Bulb Material UV Block Quartz Arc Tube Material PCA Base Designation PGZX18

 The Application of 315W Ceramic Metal Halide Lamp

Ideal for horticultural lighitng, good for both vegetative and bloom stages

https://www.azgrowlight.com/products/315w-ceramic-metal-halide-lamps-high-par-value.html

Overview of 1000W Internal Reflector Grow Light Fixture

Specially designed for internal reflector lamps, 600W & 1000W for options

Runs on 240V and 400V

with high efficient 1000W electronic ballast

Warranty: 3 years

 The Details of 1000W Internal Reflector Grow Light Fixture

HID Lamp with high efficient internal reflector

Two types of base for option: fixed PGX base and rotable EX40

High efficient electronic ballast

Protection cover from contamination and oxidations.

Matched power cord included.

 The Advantages of 1000W Internal Reflector Grow Light Fixture

Wide light distribution

The lamp with internal reflecdtor with up to 15% more light

No acoustic resonance

 The Specification of 1000W Internal Reflector Grow Light Fixture

 The Application of 1000W Internal Reflector Grow Light Fixture

Greenhouse for suplimental light for vegetables and flowers. It's significant for boosting yield and quality improvement.

 Dimensions

Case Length

232.5mmm

9.15"

Case Width

188mm

7.40"

Height

530mm

20.87"

Weight

4.5kg

9.92lb

https://www.azgrowlight.com/products/1000w-internal-reflector-grow-light-fixture.html

Performance Data of 1000W Double Ended MH Lamp

 The Application of 1000W Double Ended MH Lamp

1000W Double Ended MH lamps are widely used in the horticultural lighting and are suitable for supporting plants in earlier development stages by promoting stronger roots, better resistance against disease and more compact growth.

https://www.azgrowlight.com/products/1000w-double-ended-mh-lamps.html

Performance Data of 1000W Double Ended HPS Lamp

 The Application of 1000W Double Ended HPS Lamp

1000W double ended HPS lamp is widely used in greenhouse lighting by promoting blooming and fruiting.

https://www.azgrowlight.com/products/1000w-double-ended-hps-lamps-high-lumen-efficiency.html

The biggest advantage of 630W ceramic metal halide lamp is that its luminous efficiency is very high, and its luminous efficiency is as high as 80-90Lm/W. It has less heat when luminous normally, so it is a kind of cold light source. Because the spectrum of metal halide lamp is a dense linear spectrum superimposed on the basis of continuous spectrum, the color rendering index is particularly high, that is, the color reducibility is very good, up to 90%. In addition, the color temperature of metal halide lamp is high, which can reach 5000-6000K, and the special projector lamp can reach 7000-8000K. Under the same brightness condition, the higher the color temperature, the brighter the human eyes feel.

Ceramic metal halide lamp has short relative life because of its high brightness and small volume. Due to the limitation of material and technology, another disadvantage of metal halide lamp is that it is difficult to start, so special trigger must be used. The brightness system increases gradually after starting. If the starting energy is too large and the starting speed is too fast, the lamp life will be affected. Full consideration should be given to the circuit design.

Overview of 1000W Grow Light Electronic Ballast

Drives HPS and MH 1000W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

The Details of 1000W Grow Light Electronic Ballast

1. Converts between HPS and MH lamps automatically by microprocessor

2. Adjustable knob for easy switch to different powers as needed

3. Ventilation opening for heat dissapation

4. 8 Feet heavy-duty power cord included

The Advantages of 1000W Grow Light Electronic Ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan

2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch

3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max

4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

AZ electronic ballasts can work with a wide range of high pressure sodium (HPS) lamps and metal halide (MH) lamps to provide plants with supplemental light for better and faster growth, automatically converting between HPS lamps and MH lamps by micro-chip programming, with stable voltage output ensuring flicker free light. Electronic ballasts produce less heat, are quietly silent and have circuit protection built in. Compared to magnetic ballasts, electronic ballasts are more energy saving, more adjustable, more compact, and make the lifetime of the lamps longer for it can adjust the output to the lamp during its lifetime and has a soft start which put less stress on a lamp when starting it up.

 Features of Grow Light Electronic Ballasts

Popular items among AZ electronic ballasts are 1000W & 600W with dimming (50%, 75% and 100% power level) and non-dimming models for your choice, manufactured with the highest quality components needed for the high output frequency. They feature a powder coated aluminum housing with finned body, which is good for heat dissipation and optimal cooling. AZ electronic ballasts can work with various kinds of supply voltages to cater for different markets and applications. Besides 120V/240V, we also supply electronic ballasts that can work with 400V in horticulture.

Overview of 630W CMH Grow Light Fixture

Runs 2pcs of 315W CMH lamps

High efficiency electronic ballast

Works on 120V/240V

High output and improved spectrum

Warranty: 3 years

ETL certified

 The Details of 630W CMH Grow Light Fixture

German aluminum reflector with high reflectivity >98%

Low frequency ballast that's highly efficient and reliable without electromagnetic interference

Compatible with two pcs of ceramic metal halide 315W lamp

Two pcs of 315 cosmo lamphoders

Matched power cord included

 The Advantages of 630W Grow Light Fixture

offers a superior PAR value and CRI

CMH lamps run much cooler than other HID lamps

The light delivered much closer to sunlight, good for both vegetative and bloom stages

No acoustic resonance

Performance Data of 630W Ceramic Metal Halide Lamps

Initial lumens at rated

  watts after 100 hours

72000

lm

operation

  Rated average life

10000

Hours

Correlated color temperature

3000

TO

Color rendering index

90+

 Operating Position

H〇R

 BY Value

1200

μmol/s

 Electrical Characteristics of 630W Ceramic Metal Halide Lamp

Nominal lamp wattage

630

IN

Nominal lamp voltage

195

V

Nominal lamp current

3.2

A

 Physical Descritpion of 630W Ceramic Metal Halide Lamp

Maximum overall length

394

mm

Light center length

/

mm

Bulb diameter

33

mm

Bulb designation

T32.5

Bulb material

UV block quartz

Arc tube material

PCA

Bulb finish

Clear

Base designation

Double ended

The Application of 630W Ceramic Metal Halide Lamp

Ideal for horticultural lighitng, good for both vegetative and bloom stages

Performance Data of 600W Reflector HPS Lamp

Light Output(Lumens 100Hrs)

90000

Lamp Lumens Per Watt (Lumens / att)

150

Rated Life(Hrs. 10 Hr. 1Strat)

32000

Color Temperature(k)

2000K

Chromaticity(CIE-xly

0.52, 0.42

COLOR Rendering Index(CRI)

twenty two

Burning Position

Universal

Hot Restart Time(min)

3--5

Photon Flux BY 400-700 (umol / s)

1190

 Electrical Characteristics of 600W Reflector HPS Lamp

Nominal power (w)

600

Nominal lamp voltage (v)

200

Tube Current(Amps)

3.5A

Dimmable

YES

 Physical Descritpion of 600W Reflector HPS Lamp

Base Designation

E40

Bulb Designation

T46

Bulb Diameter mm(D)

46max

Max Overall Length(MOL)mm(A)292max

292max

Light Center Length(LCL)mm (B)175

175

Effective Arc Length

/

Max Base Temperature(C)

250 ° C

max Bulb Temperature (C)

500 ° C

Luminaire type

ENCLOSE/OPEN

Socket Pulse Rating(KV)

5

Application of 600W Reflector HPS Lamp

Ideal for horticultural lighting and greenhouse lighting

Overview of 600W Grow Light Electronic Ballast

Drives HPS and MH 600W Lamps

Dimmable options: 50%/75%/100%

Works on 120V/240V

High frequency, up to 120kHz

Warranty: 3 years

 The Details of 600W Grow Light Electronic Ballast

1. Converts between HPS and MH lamps automatically by microprocessor

2. Adjustable knob for easy switch to different powers as needed

3. Ventilation opening for heat dissapation

4. 8 Feet heavy-duty power cord included

The Advantages of 600W Grow Light Electronic Ballast

1. Very low heat dissipation and optimal cooling with a power coated aluminum housing and a 40mm Dc fan

2. Using microprocessor to differentiates HPS & MH lamps, no need of an extra ballast or a switch

3. Fast lamp ignition by lighting up the bulbs within 1-2 mins max, quality

4. Ultra-Safety: end of lamp life protection, short circuit protection, open circuit protection, ignition failure protection and thermal protection.

Performance Data of 315W Ceramic Metal Halide Lamps

Initial Lumens

33000

Lm

Rated Average Life

10%Failure @12000hrs

Correlated Color Temperature

3100

TO

Color Rendering Index

90+

 Operating Position

U

 PPF Value

620

μmol/s

 Electrical Characteristics of 315W Ceramic Metal Halide Lamp

Nominal Lamp Wattage

315

IN

Nominal Lamp Voltage

100

V

Nominal Lamp Current

3.15

A

 Physical Description of 315W Ceramic Metal Halide Lamp

Max. Overall Length

193

mm

Light Center Length

89

mm

Bulb Diameter

38

mm

Outer Bulb Designation

T38

Outer Bulb Material

Quartz

Inner Bulb Material

UV Block Quartz

Arc Tube Material

PCA

Base Designation

PGZX18

The Application of 315W Ceramic Metal Halide Lamp

Ideal for horticultural lighitng, good for both vegetative and bloom stages

Overview of 1000W Internal Reflector Grow Light Fixture

Specially designed for internal reflector lamps, 600W & 1000W for options

Runs on 240V and 400V

with high efficient 1000W electronic ballast

Warranty: 3 years

 The Details of 1000W Internal Reflector Grow Light Fixture

HID Lamp with high efficient internal reflector

Two types of base for option: fixed PGX base and rotable EX40

High efficient electronic ballast

Protection cover from contamination and oxidations.

Matched power cord included.

 The Advantages of 1000W Internal Reflector Grow Light Fixture

Wide light distribution

The lamp with internal reflecdtor with up to 15% more light

No acoustic resonance