amos-scientific

B101 Pathology Slide Storage Cabinet

Our Pathology Slide Storage Cabinet is the ultimate solution for organized and secure slide storage. Designed with precision, it offers a controlled environment to protect precious specimens, streamline access, and ensure long-term preservation for diagnostic excellence and research integrity.

Description of B101 Pathology Slide Storage Cabinet

Specification of each parts

No

Parts No

Spec. of Material

Teconology

1

Housing

0.80mm

Steel

2

Drawer

0.80mm

Steel

3

Drawer Rack

2mm

ABS

4

Base

0.80mm

Steel

Specification of B101 Pathology Slide Storage Cabinet

Standard one set includes 4 parts, one part includes 3 Rows with 18 drawers, total is 12 Rows with 72 drawers

Storage

65000 pcs slides about

Size（H, W, L）

1625x403x478mm

Package

495*590*430mm*3 cases 495*590*570mm*1 case

G.W

127.2kgs

N.W

93.2kgs

AWB210 Water Bath

Our Pathological Water Bath is designed for precise temperature control, making it an indispensable tool in histology labs. It ensures accurate specimen processing and paraffin removal, optimizing tissue preparation for microscopic analysis and pathological examinations.

Description of AWB210 Water Bath

Water temperature can be set to user's favor.

Easy and reliable operation display.

Stand alone unit placed near microtome.

It suits all laboratories.

Specification of AWB210 Water Bath

Capacity

2.3L

Water trough dimensions(mm)

230*180*56

Temperature range

from ambient  ~75℃

Temperature control accuracy

±1℃

Rated voltage

220V±10%, 50hz /110V±10%, 60hz

Nominal power

350W

Outside dimensions (W*D*H)

328 ×300 ×85 mm

Weight

2.4kg

AVTP2500 Vacuum Tissue Processor

Our Vacuum Tissue Processor is an essential tool for rapid and precise histological specimen processing. Its vacuum-assisted technology expedites tissue fixation and dehydration, enhancing laboratory efficiency while maintaining sample quality.

Description of AVTP2500 Vaccum Tissue Processor

User friendly and easy to learn color touch screen with graphic symbols.

Every work status be clearly displayed in large color touch screen.

Simplified software with intelligent control.

Automatic reagant replacement: when the alcohol in the first tank has been used for the set number of times, it will remind you that the alcohol concentration is lower than required. The alcohol in this tank will be discharged first, and the alcohol in other tanks can automatically move forward in sequence, thereby saving reagents.

Up to hundreds of protocols to meet different tissue processing requirements and make modification to the current protocol.

Two kinds distributing valve for Regant and wax be treat reagent and wax separately, maximum to prevent the tube blocking under ambient temperature.

Power failure protection function. External UPS to prevent tissue damage due to power failure. When power is restored, the previous protocol is automatically resumed and completed.

Check the seal situation automatically before working, and alarm any problem happens.

Automatic check of seal situation before work begins, abnormalities will be alarmed.

Tissue is placed in retrot bath, free from air contamination and drying can be conducted in a controlled environment.

Specification of AVTP2500 Vaccum Tissue Processor

Surroundings requirements

Working temperature

‘+10℃-35℃

Working humidity

<80%,defrosting

Working pressure

(86~106) KPa

Power supply

220 V AC/110VAC

Frequency

50/60 Hz

Power:

<1000 VA

Fuse:

main power 3A, heating power5A

Safe classify

Classify I-type B

Dimensions

L:650mm, W:690mm, H:1285mm

Weight(net)

approx190kg

Number of paraffin bath

3pcs

Capacity

3.5L

Working temperature

55-70℃

Temperature accuracy

±1℃

Melting time

10h

Number of Retort bath

1pc

Capacity:

max 300cassettes(3basket)

Reagent volume

4.5L

Temperature(paraffin)

55-70℃

Temperature(processing reagents)

55℃

Temperature accuracy

±1℃

Negative pressure max

700mbar

Positive pressure max

350mbar

Waste reagent bottles

1pc

Maximum bottle volume

5L

Reagent bottles

9pcs

Maximum bottle volume

5L

Cleaning bottles

4pcs

Maximum bottle volume

5L

Waste wax box

1pc

Maximum bottle volume

4.5L

Color LCD touch screen

10inches

Experience seamless tissue processing with our Carousel Tissue Processor. This advanced laboratory equipment automates sample fixation and dehydration, optimizing workflow efficiency while maintaining sample integrity for precise histopathological analysis.

Description of ATP200 Carousel Tissue Processor

1. Robust equipment, easy to handle, mounted in tubular frame plate in high resistance plastic resin finishing.

2. External finishing in white, resistant to the lab environment and xylol products.

3. Micro-processed central digital touch screen LCD panel, which controls all functions of equipment such as date, time and year and equipment adjustment parameters configuration.

4. Daily schedule for 24 hours and sloe time setting for weekends or extended holidays.

5. Changeable programming with selectable time interval according to the need of the operator. Ability to pause processing in any bath or position.

6. Adjustable bath speed and time control allowing total flow, fully preventing contamination of one bath to other.

7. High duration battery own up to 10 years allowing data protection even in lack of power situations.

8. +/- 20 min continuous operation in lack of power situation. Energy provided by no break variable according to no break capacity.

9. Protection sensor that controls paraffin mugs individually with visual and sonorous alarm protection for sub and super heating.

10. System protection not allowing the penetration of the last xylol paraffin bath, in case of not agreeable selected temperature parameter.

11. Automatic stop at end of system cycle, 9 storage protocols programs pre-selected by operator.

12. System oscillation inox basket with capacity up to 85 cassettes which improves the processed material quality.

Specification of ATP200 Carousel Tissue Processor

Paraffin Bath

Temperature Control in panel, with adjustable sensitivity to 80±1 C. Capacity up to 255 plastic cassettes using 3 baskets Capacity to 10 Reagent baths and 2 paraffin baths, total 12 baths of 2L each Sealant bath lid that fully prevent environment contamination

Height

800mm

Width

530mm

Weight

70kg

Power

500 W

Voltage

220V at 50/60 HZ

ATP140 Tissue Processor

Our Tissue Processor is a state-of-the-art laboratory instrument, meticulously designed for efficient tissue sample processing. With automated controls and superior reliability, it ensures precision and consistency in histopathology procedures.

Description of ATP140 Tissue Processor

Protective functions:

If the hanging basket comes into contact with any obstacles when entering the liquid tank during operation, it will return to the first tank so as to protect the tissue from being destroyed.

Special cover used with the multiple gasket seal produces excellent sealing performance, which minimizes the volatilization loss of the liquid.

The special glass cover, sealing strips and double layer active carbon filter ensure that the air in the room is not contaminated.

The large screen LCD shows the operating conditions clearly.

Manual operation can be used at will during running to adjust the processing time and improve the processing effect.

In-built UPS can prevent the tissue being stuck in the air or 100% ethanol or xylene for an extensive period of time, destroyed in the event of power failure.

Protection functions for power failure:

You can set which tank is the protecting tank according to your requirement. When power failure lasts more than 5 minutes, the basket automatically enters the protection tank.

When the basket moves into or in front of the protecting tank, if power cut lasts for 5 spacing minutes, the basket stays in the current liquid tank, and shall continue to operate as per the original process until power-on.

When the basket moves between the protecting tank and wax tank, if power cut lasts more than 5 minutes, the basket shall enter the protecting tank, and shall continue to operate as per the original process until power-on.

When the basket moves to wax tank, if power cut lasts more than 5 minutes, the basket shall enter the wax tank, and shall continue to operate as per the original process for one hour with the temperature of wax was raised to your set temperature.

Specification of ATP140 Tissue Processor

Power supply

220V±10%, 50Hz / 110V±10%, 60Hz

Fuse

220V:5AUPS:2A/110V:8A UPS:3A

Power

466W

Outside dimensions(mm)

1235X475×590(W*D*H)

Weight

70 kgs

Transform your frozen tissue sectioning workflow with our Fully-automatic Cryostat Microtome equipped with an intuitive touch screen interface. Its advanced automation and precision guarantee swift, reliable sample preparation for precise diagnostics and research endeavors.

Description of AST580 Fully-automatic Microtome Cryostat with Touch Screen

AST580 fully automatic microtome is designed under engineering and ergonomic concepts. All the components are processed by computer numerical control.

Retraction function prevents specimen damage from blade.

Total thickness calculation.

Low temperature refrigeration system with environment friendly refrigerant R404.

Adopt UV sterilize for 30 minutes every time.

Peltier specimen clamp refrigeration can be turn On or Off manually.

Two defrosting methods: manual and automatic.

Emergency stop function: Press the red button to stop running when any emergency happens.

The high prevision unit is enclosed outside the cryostat chamber to prevent it from thermal expansion and contraction, and keeps minimum maintenance requirement.

Artificial intelligent interface is easy to learn and operate.

Touch Screen and display all information including thickness, thickness sum, controlling time, temperature, time on/off and so on.

Sleep Function: after activating this function, the temperature in cryostat chamber can be kept between -1℃ and -10℃; after stopping this function, the temperature in freeze chamber will rise to working temperature within 30 minutes.

Control panel with locking function could avoid faulty operation.

Handwheel locking function.

Wide freezing shelf can load 17 specimen cassettes simultaneously, and two of them are equipped with peltier to meet different temperatures.

Specification of AST580 Fully-automatic Microtome Cryostat with Touch Screen

Environment requirement

Temperature Range

+15℃～+30℃

Air Humidity

≤60%

Working pressure

（86～106）kPa

Nominal Voltage

220～240V AC/100～120V AC

Normal Frequency

50/60 Hz

Power

≤1000VA

Fuse

8A/20A

Safe Classify

Classify I - Type B

Lowest freeze chamber Temperature

-35±2℃

Lowest freeze shelf Temperature

-45±5℃

Lowest temperature of peltier unit on freeze shelf

-55±5℃

Lowest temperature of peltier unit on specimen clamp

-50±5℃(Working time of peltier: 15 minutes)

Electric coarse feed

Slow: 300µm/s±30µm/s

Rapid: 900µm/s±30µm/s

Section thickness range

0 to 100µm 0 to 3µm, in 0.5µm increments 3 to 10µm, in 1µm increments 10 to 20µm, in 2µm increments 20 to 100µm, in 5µm increments

Trimming thickness range

0 to 600µm 0 to 50µm, in 5µm increments 50 to 100µm, in 10µm increments 100 to 600µm, in 50µm increments

⊙Retraction

0~80µm, in 5µm increments

⊙Specimen feed

24mm ±0.2mm

⊙Vertical stroke

54mm±1mm

⊙Specimen Max

35×35mm

⊙Repositioning of blade holder base(left-right)

50±1mm

⊙Motorize cutting speed

75～230mm/s ± 10%.

Dimension

Width

715mm

Length

765mm

Height

1230mm

Weight

About 130kgs

Experience effortless frozen tissue sectioning with our Semi-automatic Cryostat Microtome featuring a user-friendly touch screen interface. This innovative instrument combines precision and convenience, ensuring consistent, high-quality sections for rapid pathological assessments and research applications.

Description of AST560 Semi-automatic Microtome Cryostat with Touch Screen

It is designed overall engineering and ergonomic concepts. All the components are processed by computer numerical control.

Retraction function prevents specimen damage from blade.

Total thickness calculation.

Low temperature refrigeration system with environment friendly refrigerant R404.

Adopt UV sterilize for 30 minutes every time.

Peltier specimen clamp refrigeration can be turn On or Off manually.

Two defrosting methods: manual and automatic.

The high prevision unit is enclosed outside the cryostat chamber to prevent it from thermal expansion and contraction, and keeps minimum maintenance requirement.

Artificial intelligent interface is easy to learn and operate.

Touch Screen and display all information including thickness, thickness sum, controlling time, temperature, time on/off and so on.

Sleep Function: after activating this function, the temperature in cryostat chamber can be kept between -1℃ and -10℃; after stopping this function, the temperature in freeze chamber will rise to working temperature within 30 minutes.

Control panel with locking function could avoid faulty operation.

Handwheel locking function.

Wide freezing shelf can load 17 specimen cassettes simultaneously, and two of them are equipped with peltier to meet different temperatures.

Specification of AST560 Semi-automatic Microtome Cryostat with Touch Screen

Environment requirement

Temperature Range

+15℃～+30℃

Air Humidity

≤60%

Working pressure

（86～106）kPa

Nominal Voltage

220～240V AC/100～120V AC

Normal Frequency

50/60 Hz

Powe

≤1000VA

Fuse

8A/20A

Safe Classify

Classify I - Type B

Lowest freeze chamber Temperature

-35±2℃

Lowest freeze shelf Temperature

-45±5℃

Lowest temperature of peltier unit on freeze shelf

-55±5℃

Lowest temperature of peltier unit on specimen clamp

-50±5℃(Working time of peltier: 15 minutes)

Electric coarse feed

Slow: 300µm/s±30µm/s Rapid: 900µm/s±30µm/s

Section thickness range

0 to 100µm 0 to 3µm, in 0.5µm increments 3 to 10µm, in 1µm increments 10 to 20µm, in 2µm increments 20 to 100µm, in 5µm increments

Trimming thickness range

0 to 600µm 0 to 50µm, in 5µm increments 50 to 100µm, in 10µm increments 100 to 600µm, in 50µm increments

Retraction

0~80µm, in 5µm increments

Specimen feed

24mm ±0.2mm

Vertical stroke

54mm±1mm

Specimen Max

35×35mm

Repositioning of blade holder base(left-right)

50±1mm

Motorize cutting speed

75～230mm/s ± 10%

Dimension

Width

715mm

Length

765mm

Height

1230mm

Weight

About 130kgs