Labnics

Labnics Ultrasonic Pulse Velocity Tester is designed for structural evaluation with a crack width measurement range of 0 to 10 mm. Signal triggering mode supports accurate pulse capture, while the color LCD capacitive touchscreen for clear monitoring and intuitive control and built in lithium battery support on-site operation. The unit operates in temperatures ranging from -10 °C to +40 °C with humidity below 90 % RH, process with ultrasonic transmission method with high receiving sensitivity, and single-channel acquisition mode. Manufactured for construction, infrastructure inspection, geological survey, and civil engineering applications.

Labnics Tabletop Autoclave is designed for steam sterilization at 134 °C with a working pressure of 0.22 MPa. Microprocessor control and a built in steam generator support consistent sterilization and rapid saturated steam production. The unit features a 45 L stainless steel chamber and an LED touchscreen display for parameter monitoring and operation.

Manufactured for laboratory, healthcare, and research applications requiring steam sterilization of instruments, glassware, and laboratory materials.

Labnics Double Beam Balance is designed for precise weighing with a maximum capacity of 2000 g and a 0.1 g division value. Magnetic damping helps the beam settle quickly, while agate bearings and precision knife edges reduce friction and wear for smoother operation, and more consistent accuracy. The two-pan design includes a stainless steel pan with a 150 mm diameter and aluminum alloy construction, while the sliding weights let users fine-tune the balance quickly for precise measurement.

Manufactured for laboratory, educational, and quality control applications requiring accurate mass measurement.

Labnics Anaerobic Jar System rapidly creates controlled atmospheric conditions for cultivating anaerobic, microaerophilic, and capnophilic microorganisms. It features an airtight sealing system for anaerobiosis and is suitable for laboratories with low sample throughput. The unit features a 3.5 L hermetic chamber with a 2–4 hour processing time, airtight leak-resistant sealing, impact-resistant PMMA construction, and a durable coated lid with stainless steel clamps. Manufactured for clinical and microbiological laboratories, as well as research facilities, where precise control of oxygen-free atmospheric conditions for anerobic and microbial organisms growth.

Labnics Automated NGS Library Preparation System is designed for automated DNA and RNA library preparation with a pipetting range of 0.5 to 200 µL. It supports 8 or 96 channel processing, magnetic bead based fragment purification, and fluorescence based assay analysis. The unit integrates PCR amplification, automated labware handling, and a multi functional mode check for streamlined operation. Manufactured for genomics and molecular biology laboratories requiring standardized, automated, and reproducible NGS library preparation workflows.

Labnics Sand Bath is designed for indirect sample heating up to 400°C, ensuring safe and uniform thermal performance. Its smooth, corrosion-resistant surface allows effortless cleaning and long-term durability, while stepless heat adjustment provides precise control without preset levels. The unit offers a cold-rolled steel shell with durable construction, ensuring even heat distribution and chemical resistance. Manufactured to provide flame-free heating for laboratory samples and ensure reliable performance in chemical synthesis.

Labnics Power Cord Flexibility Tester is designed to evaluate power cord durability with a 0° to 360° flexing angle. PLC touchscreen control, servo motor drive, and dual clamps support accurate testing. The unit incorporates a single test station with 5 N and 10 N loading weights, providing a wide flex angle range and long cycle capacity for efficient durability assessment. Manufactured for quality control, durability testing, and product development applications in electrical and industrial testing.

Labnics Pycnometer is designed for density measurement of liquids and solids using precise weighing techniques. It offers a 50 mL capacity and borosilicate 3.3 glass for clear sample observation and reliable handling. The unit operates within a temperature range of 10 °C to 40 °C. A tightly fitted seal cap helps prevent air leakage, sample loss, and contamination during measurement. Manufactured for quality control, research, and analytical applications requiring accurate density determination.

Labnics Suction Apparatus is designed for fluid and gas aspiration during surgical procedures with a vacuum range up to 675 mmHg. It includes a suction pump, tubing, and collection canister for controlled fluid removal. The unit features an oil-free piston pump with a 30 L/min flow rate, a 10× bacterial filter for infection control, and washable, sterilizable glass jars to maintain hygiene and patient safety. Manufactured for hospitals, clinics, operating rooms, and emergency care applications requiring fluid aspiration.

Labnics Temperature and Humidity Test Chamber is designed for material testing under controlled temperature and humidity conditions. Corrosion resistant stainless steel construction supports long term operation and consistent performance. The chamber offers a 50 L capacity with a temperature range from -20 °C to 150 °C. It features a toughened double-layer glass window, independent control software, and a capacitive humidity sensor for precise monitoring. Manufactured for research, pharmaceutical, chemical, and food testing applications.

Labnics Recirculating Water Chiller Bath is designed for temperature controlled cooling with a flow rate of 25 L/min and a lift capacity of 6 m. PID control supports stable temperature regulation, while overcurrent and leakage protection assist safe operation. The unit offers a 20 L capacity with a temperature range of -30 °C to room temperature. It is equipped with a refrigeration compressor for efficient cooling, a digital display for easy monitoring, and a stainless steel vortex pump for reliable circulation and long-term durability. Manufactured for cooling laboratory vessels, reaction containers, and testing applications requiring controlled low temperature conditions.

Labnics Prover Tank is designed for liquid flow validation with a 50 L capacity. Its non porous surface supports easy cleaning, while the chemical resistant construction withstands exposure to harsh substances. The compact design supports convenient handling and space saving installation. The unit features a heavy duty stainless steel structure, low maintenance operation, and supports high frequency calibration for consistent measurement accuracy. Manufactured for calibration, quality control, and process verification applications. Supports liquid flow validation and measurement monitoring.

Labnics ESR Analyzer is designed for erythrocyte sedimentation rate testing with the capacity to process up to 30 samples simultaneously. An infrared sensor measuring principle supports accurate non contact detection during analysis. The unit features a built-in thermal printer for instant report generation, LIS/HIS connectivity for seamless data management, barcode scanning support for accurate sample identification, and real-time ESR curves for continuous monitoring of test progress. Manufactured for clinical laboratories, hospitals, and diagnostic facilities for inflammation assessment and disease monitoring workflows.

Labnics Stainless Steel Water Distiller is designed to produce contaminant free water through heating and condensation processes. Automated operation with an automatic shutdown alarm system detects water shortage conditions and supports automatic water level control. The unit features a 20 L capacity and is equipped with visual indicators for water shortage and heating status, ensuring convenient operation. Its low-maintenance design allows for easy cleaning and reliable performance.

Manufactured for laboratories, healthcare facilities, chemical processing, and research environments requiring distilled water.

Labnics Deionized Water System is designed to produce purified water with a 10 L capacity and conductivity below 10 µs/cm. Precise temperature control and a clear display support real time monitoring. The unit incorporates an auto sanitary module and UV technology to support reliable purification. The system operates within a temperature range of 10 °C to 35 °C and a humidity range of 30 % to 85 %. It features a 304 stainless steel water tank and an F type RO membrane filter for water purification. Manufactured for laboratory, medical, and water purification applications requiring high purity water and contaminant removal.

Labnics Portable Nephelometer is designed for turbidity measurement from 0.0 to 5.0 McF with a resolution of 0.01 McF. It supports rapid detection of turbidity and optical density in microbial samples and features a clear display for result interpretation. The unit features a silicon photocell detector, normal and average measurement modes, 1 s detection time. Its compact design supports portable operation. Manufactured for microbial growth monitoring, antibiotic susceptibility testing, bacterial suspension standardization, cell concentration measurement, and culture turbidity analysis.

Labnics Blood Bag Tube Sealer is designed for sealing blood, infusion, and urine bags using high-frequency sealing technology. It accommodates tube diameters from 2 to 6 mm and helps prevent blood leakage and hemolysis during processing. The unit features automatic sealing, and a single chip control system with automatic voltage adjustment. A circulating air duct supports continuous operation and temperature control. Manufactured for blood banks, hospitals, and biological applications requiring blood bag sealing workflows, equipped with a long-life electronic tube rated for approximately 1000 hours of operation.