vipprogfixphone

Here is a tutorial on using the Luban Type-C Tail Plug charging port testing board for mobile phone repair. The Luban Type-C Detection Board includes USB-DN/USB-DP/CC1/CC2 test button, CC1/CC2/USB-DP/USB-DN/VBUS 5V/VBUS 9V Indicator light, CC1/CC2/USB-DP/USB-DN/VBUS/GND test point and CC channel mode switch. Tutorial: CC1 and CC2 Instruction (CC1 and CC2 are equipped with a blue indicator…

Download the software, driver and EEPROM data of WYLIE iPad charging chip decoding programmer for free. You can quickly read and repair iPad charging faults without soldering jumper wires, such as no charging, unable to charge quickly, unable to switch to 15V, charging indicator light not showing, no charging current when charging, etc., to reduce the difficulty of operation and improve the…

The iPhone 15/16 series is an advanced smartphone produced by Apple, but users and repair professionals often encounter charging issues, such as the iPhone not charging at all or charging intermittently. These problems can stem from faulty hardware components like the U2 charging IC (EEPROM chip), software glitches, or even simple issues like a dirty charging port. Here, the China Phonefix team…

iOS 18 iPhone battery health and pop up issues solution. LanRui Battery Efficiency Extension Flex Cable resets iPhone 11-15 Pro Max 100% battery capacity health data without flashing and runs “Diagnostic Mode” on iPhone 12-15 Pro Max to remove “Important Battery Message” Pop-up on  iOS18. Upgraded Lanrui battery efficiency extension cable for iPhone 11/12/13/14/15 Pro Max battery repair,…

The iPhone prompts “Face ID is Not Available” and no True Tone function after iPhone earpiece flex cable replacement. In order to fix these issues, we have flash and unbind the iPhone Factory Code first, and then use i2C i6S Programmer and I2C receiver earpiece flex cable. Here is the guide for flashing iPhone and unbinding iPhone Factory Code on iOS 18 systems, and the operation guide after…

Here is an instruction for using the i2C i6S programmer with the new dot matrix read write activation board and i2C Face ID dot matrix repair cable to fix iPhone Face ID problems. Disassemble the iPhone and take out the original iPhone dot matrix flex cable. Install the original dot matrix flex cable on the Face ID read-write activation board on the i2C i6S programmer. Click “detection”, and…

Regarding the issue that the DL400 Pro LCD screen tester displays “Unknown FPC” and cannot be used after updating the software, the solution is that we need to replace the new DL400_V4.0 socket. Since the old socket of the DL400 Pro tester cannot be adapted to the new software and models, the DL400 Pro screen tester will prompt an unknown FPC after updating the software. After using the new…

Good News! JCID has just done a test, iOS 18 doesn’t affect JCID Battery Repair Cable for iPhone battery health repair, and Apple iOS18 system no longer requires a 0-cycle adapter. iPhone battery health data repair solution:JCID battery programmer (V1SE, V1S Pro, JCID-Q1) with JCID battery tag-on repair FPC cable and clear voltage drop and lock capacity function. JCID battery repair cable…

RF4 RF-C39 and RF4 RF-C39L are 4K dual-spectrum thermal imaging cameras for Phone/Electronic circuit boards fault diagnosis and leakage detection. A processional motherboard repair camera for mobile phones/iPads/laptops, etc. Both the RF4 RF-C39 and RF4 RF-C39L thermal imagers can be used with microscopes, with 4K ultra HD viewing. But the RF4 RF-C39L thermal camera has an upgraded fixed…

Many users are interested in i2C P30 10-in-1 digital power supply. What functional modules does the i2C P30 power supply include? Are these modules really effective and practical for mobile phone repairs? Yes, this power supply is indeed powerful and effective, the i2C P30 power supply can be used with 10 different expansion modules to achieve different functions. If you are a professional mobile…

Due to the powerful protection function of Apple iPhone, when an iPhone detects liquid in the iPhone USB-C charging port, or on the charging cable or accessory, it pops up “Charging Not Available” and prohibits charging to protect your iPhone and the accessory. If you charge your iPhone when the Lightning or USB-C connector is wet, the pins on the connector or cable may corrode and become…

JCID has released a new one-click clear voltage reduction and capacity locking technology to release the capacity of iPhone battery cell, transforming the old BMS into a new 0-cycle BMS, and improving the iPhone battery life. As we know, because the old iPhone battery has been used for a long time, the voltage value of the protection board becomes lower and lower. The protection board, which…