#wireless headphone

My Awei A780BL wireless headphone's 2 year condition (w/ my Paper Dolls) - [Dec 15, 2021]

Hello! This is my last post in 2021; as we say goodbye to this year and a new year is coming up on the horizon. Anyway, I want a talk about my recent used wireless Bluetooth headphone; the Awei A780BL.🎧

So without further ado, let's get started:

1st [Top] to 4th Images:

• Now, it has been 2 years since May 30, 2019. At look at it now; my headphone has scratches (well a bit), dusts, messy, and even glued by using sticky tapes & super glue, well, for the most part. Let me explain.

• First off 👆, the plastic part on the adjustable headbands snapped. But the metal piece on each side (sandwiched between the aforementioned plastic part) still intact, so I used scotch sticky tapes on the right side & duct tape on the left side. Weird, huh...

• Second ✌️, the left side of the ear cover also snapped from me accidentally pulled. Originally I taped all around with small metal bends on the left side but it doesn't seem do the job, and it looks pretty bad. (Which I have that picture right here [CLICK ME!]) So I removed the tape and I applied super glue on the broken part, then I used paper long tail clips to prevent separate & let it for overnight until it's completely sticky secured. Now that the left ear cover is cured, well, except that foldable joint, which is now wobble than it used to. I decided to disassemble the left ear cover by unscrew & it turns out that the plastic part from inside broke. So, what to do? I tried stuffing by tiny size folded paper but the wobbly still there. Nah, whatever. At least the wire audio remains functional after fixing.

• The right ear cover on the hand still intact. Well, except one: the functional buttons. Here are the ff. issues I've encountered:

5th & 6th Images:

○ Power button 🔘: It's hard to press now when I try to turn on than it used to. Plus, it takes time to press for about 5 to 6 seconds for turn on / turn off my headphone. And it's quite confusing on whether I should press hard or gentle, because I don't want to broke the power button. Without it, my headphone is now useless, but at least I could switch to wire mode with my audio jack cable.

○ Volume & play/pause buttons ⏮⏯⏭: When I try to adjust the volume (whether low or high) from my headphone it automatically shuts off (while connecting my computer or my phone). Weird. It doesn't seem right though. Same goes to play/pause buttons. It seems I won't be touching these in the future.

BTW: I haven't touch the TF-Card slot from the wireless headphone. Honestly, I don't usually inserting my Micro SD Card on my headphone, so yeah.

○ (And finally) Battery 🔋: Ummm... Okay, let's talk about battery life from A780bl headphone. I usually watching videos for about 7 to 8 hours per week and sometimes 3 to 4 hours, then when I hear "battery low" from my headphone I act quickly by switching wire mode with my audio jack to continue watching. And when I'm done, I charge my headphone for long hours. It's weird, according to the official manual it's said that the charging time is 2 hours. Well, I hate to tell ya but I charge it for 12 hours. I mean, c'mon, make up your own mind, Awei. The A780bl's battery life should known better, but otherwise it's a decent job (I guess).

7th & 8th Images:

• As for the soft ear pads and headband pads on the top, they're quite messy & cover in dusts.🦠️ Plus it smells sweat, hey, what do you expect. As of now, I don't see any damage or ripped whatsoever. And yes, these ear pads are my prefer when it comes to super budget over-the-ear headphones. If I have a premium expensive wireless over-the-ear headphone then it'll be far better than my super budget headphone.

Overall:

• With all of the issues, damages & others, my wireless headphone from Awei still functional as ever after 2 years of used. And yet I'm still using it to this day. The only thing that I never talk about is the sound quality, because it's the same as before without damaging the audio drive or cut from the wire inside. And that's a good thing. I still love my old Awei headphones, and while I have another one from ZNT brand, I prefer my one until the end. And if my old Awei headphone is completely busted, then I guess I'll embrace my new headphone from ZNT [CLICK ME!].

9th Image: • Even with damage conditions, my paper dolls can still fit in on my headphones. So, what you listening, you two? Anime song? 🎌🎵 Love song? 💕🎵 Rock?🎸🎵 Or maybe, cooking music? 🍴🎵 Probably the latter.😉🎧 Well, that's the end of my topic. If you want to see more about my Awei A780BL headphones, then please [CLICK ME!].

AKG Y50BT Wired and Wireless Headphone

Can be used as a wired headphone with attached cable even if charging is over. It is perfect for everyday use such as traveling, going out and more.

My Awei A780BL's 2 year condition by ~murumokirby360

It's has been 2 years, and the audio still functional as well. 😊🎧🎶

My ZNT SoundFit wireless headphone/headset review (w/ my Paper Dolls) - Part 1 [Sept 10, 2021]

Hello! Another month for another item that I want to review!

This is Part 1 of my ZNT SoundFit wireless headphone/headset review (with my paper dolls).🎧🙂

NOTE: Now before I review this item, you may be asking “What is ZNT?”. ZNT is a China-based audio brand company and it was found in 2016. The ZNT brand is exclusive to Lazada and their official website in 2018, it’s also available in Shopee. There’s no acronym nor meaning of ZNT is but it’s just an audio brand name, so it’s out of a question (I think). And uh... ZNT doesn’t make a plan on physical store(s) as far as I know, so they’re solely focused on viability online.  It’s become one of the most budget-friendly audio brands and most selling underrated brands in the online shopping market, able to compete with other audio brands, such as Awei, Remax, Baseus, etc... And as of now, ZNT is still going strong, plus they’re now producing smartwatches and wireless chargers.

Now back to my topic...

It’s been two years that I haven’t open this item yet, mostly because I’m so busy with other ongoing reviews that I’m tackling on, but now it’s finally revealed in September 2021.

Speaking of which, if you haven’t seen my previous post via recorded video, then please [CLICK ME!].🎦📲

So without further ado, let’s get started:

1st & 2nd Image(s): • Here’s the box itself, with the bottom park had a slightly crumpled but it remains a good condition. • My paper dolls saying that this box looks the perfect fit for them. Hmmm, you think so, huh.😅 You know, I still need that box though for my upcoming YT video review... (That’s probably very soon BTW, so I still need to find a better video editor software.)

3rd & 4th Image(s): • Anyways, side to side, here you see the ZNT’s official website and a QR scan code. I’ve already tried these two, and it straights through their website and also Facebook page respectively.🖱🌐 Here’s take a look of these sites → [CLICK ME! #1], [CLICK ME! #2].

• On the back of the box, you see a little information about the wireless headphone. Hope these features are advertised.🤔

5th & 6th Image(s): • Here’s the actual item itself along with accessories included. As you’ve already watched my recorded video last Saturday (Sept 4th), they remain in good condition without any mold inside or dirt or anything. So I’m relief.😌 • My paper dolls saying that they look like new after a two-year unopen item. Yeah, I know.🙂

7th & 8th Image(s): • Out of the box, here once again are the items including the SoundFit wireless headphone/headset.🎧🙂 • My paper dolls saying that the wireless headphone/headset from ZNT looks cool. Yeah, and I can’t wait to try on, in my upcoming part.😁

9th & 10th Image(s): • Looks like I’ll save that main item in Part 2, but for now, let’s take a look at three accessories; A foldable user manual (with no Chinese text), a micro USB cable, and a 3.5mm (male to male) audio cable. • My paper dolls saying that these accessories are neat, but they’re a little concerned about that micro USB type though. Yeah, well it never gets old, huh...

Overall: • Well, as I said, I’m so relieved that my ZNT item is still intact. Now I do have another ZNT item, which also stayed unopened but that’s going to be revealed very soon. I’ll be doing a comparison with my old Awei A780BL wireless headphone/headset, as well as an audio test with my phone and my PC (via my Ugreen USB Bluetooth adapter) in my separated parts this month. So I’ll promise to finish this item topic by the end of this month.😊 • Anyways, I purchased this wireless headphone/headset for ₱524 🏷 from the Shopee PH app 🇵🇭🛒🌐back in 2019, with discount points that I earned and a free shipping voucher (that’s a HUGE deal, by the way. 😁); original sale price is ₱749, while the actual price is ₱1,200. Unfortunately, as of this 2021 and my post, the SoundFit is no longer available in the online shopping market and it’s already been discontinued on both Shopee and Lazada.😟 And it was replaced by this new model → [CLICK ME!] (which I’m very interested in) Here’s hoping that the SoundFit wireless headphone/headset will return to the online market.🤞

Anyways, that’s all for now. More parts coming up next week. And if you haven’t seen my previous part, then I’ll provide a link down below.↓😉

My ZNT SoundFit wireless headphone/headset: • Opening my parcel [Sept 4th, 2021]

My ZNT SoundFit wireless headphone/headset review (w/ my Paper Dolls) - Part 2 [Sept 18, 2021] (My photos and recorded video)

This is Part 2 of my ZNT SoundFit wireless headphone/headset review (with my paper dolls).🎧🙂

In this part, I'm taking a closer look at the actual item, via my recorded video and my photoshoots as well. Sorry I haven't chance to do a side comparison with my old Awei A780BL wireless headphone/headset, but I'll promise I'll be doing it next week Wednesday. And then on next week Saturday will be my audio connection test from my smartphone and PC via Bluetooth and wired using the included audio cable.😉

If you have not seen my Part 1 on the same topic, then please [CLICK ME!].

So without further ado, let’s get started:

1st & 2nd Image(s):↓

• Here's a closer look at my ZNT SoundFit wireless headphone/headset once again.

• Isn't she beautiful? My paper dolls completely agree!

3rd & 4th Image(s):↓

• [3rd Image]: Continuing on, here's the backside of the earcups/earpads with the letters "R" and "L" on each side. I love the way they did, instead of just blank on any other headphone/headset brand(s). Although if I wear it on for long hours, I predict that it'll be faded off.

• [4th Image]: Here are my paper dolls tested out the stretchable test. I haven't tried it out on my head yet, but it's quite a solid stretch test for my paper dolls.😊👍

5th to 8th Image(s):↓

• [5th Image]: Just in case that you haven't looked at the logo of the ZNT very closely, well here it is. Also, the silver gloss part on each side is plastic made, not metal... I know right, but I guess it's nothing special.

• [6th to 8th Images]: Much like other headphones/headsets brands, the right side had a micro USB port (not a USB type C port, which is a bummer), a small hole for the microphone, a 3.5mm audio jack port, another small hole for light indicator, and three buttons; minus and plus represents volume rocker which also acts as a next and previous music tracks, and the middle is the power button. You know, to be honest, I rather love the buttons from my old Awei A780BL than my ZNT SoundFit's buttons, because I'm always using my right thumb for pressing the power buttons and others, plus their buttons on the hidden side on the right earpad/earcup are much safer than on ZNT SoundFit's front. Trust me, there's a chance of accidental pressed during tight space situations when I'm using the SoundFit.

9th & 10th Image(s):

• Finally, here's what completely folded looks like, when it's unused. My paper dolls saying that it looks pretty nice folding. Mhm.

Recorded video 🎦📲:

• The rest of my ZNT SoundFit headphone's/headset's anatomy will be recorded, so please watch my record video. Here, I'm doing the stretch durability and folding test, as well as pressing buttons on the right earpad/earcup, and several other anatomy parts like that metal screw nuts on each side and even that metal bar inside on each adjustable headphone. ZNT really did a great job adding that screw nuts though, I love it. And it's so much better than my old Awei A780BL. That middle one inserting the wire, however, is not metal, it's a glossy plastic of sorts. Well, if only that piece will be metal, too. Just saying. The adjustable headphones on each side are quite similar to my old Awei A780BL; that there's a metal bar and a plastic bar is sandwiched together, although the plastic part is not the same size as the metal one. Finally, the top cushion on SoundFit is pretty okay, it actually feels the same as the earpads/earcups.

Overall:

• The design for ZNT SoundFit is pretty good, cheap quality looking, and is decent stylish. Though except one, however... The buttons on the right earcup/earpad are in the wrong place. And as I said before, there's a chance of accidentally pressing during tight situations like crowd squeezing inside the subway metro train. But since we're in the pandemic (at the time of this post), I guess I don't see any problem. Though if you don't like the buttons from ZNT SoundFit, you better off pick other headphones/headsets that have hidden buttons on the side. It's pretty easy used (with your right thumb) and pretty safe at the same time.

Anyways, that’s all for now. More parts coming up next week. And if you haven’t seen my previous part, then I’ll provide a link down below.↓😉

My ZNT SoundFit wireless headphone/headset: • Opening my parcel [Sept 4th, 2021]

• Part 1 [Sept 10th, 2021]

My UGREEN USB Bluetooth Adapter Review (Recorded Video) - Part 4 [Jan 26, 2021]

Here’s my part 4 of my UGREEN USB Bluetooth Adapter for my Windows PC.📶🖥️😊

In this half part, I’m connecting another device of mine; and yet another Awei brand item that I’m recently used, my Awei 780BL Bluetooth Wireless Headphone.🎧🙂 

We’ve already seen the performance audio connection test with my Awei Y200 Bluetooth Speaker before, right? Well if you haven’t seen my two posts then please click these:↓

•My UGREEN USB Bluetooth Adapter Review (Recorded Video) - Part 3 [Jan 14, 2021]

• My UGREEN USB Bluetooth Adapter Review (Recorded Video) - Part 3.5 [Jan 14, 2021]

*But before that, I want YOU… Yes you, which you’re reading my description. I want you to watch my recorded video first 📹📲 (as a observation) before you read the rest of my reaction experience. Hope you’re watching…

So without further ado, let’s get started:

My Experience: • (Now as you already done watching video.) I’m doing the same thing as before from my previous video, so I’ll just skip it and moving on through my pairing connection.

BTW #1: You may notice that the left side part of my headphone was already covered in scotch tape a wire tangled, although you can’t see it. And that because the plastic quality wasn’t good at all, even the metal part on the top I decided to put some scotch tape as well. But it seems work very well on both channels, and worry I will reveal my new 1 year old unboxed wireless headphone very very soon when I’m done all of my topics  I have.

• Anyways... I try to make closer with my headphones just to hear the voice sound on both channels while I’m syncing with my UGREEN Bluetooth adapter on my PC; so I advice that you should wear a headphone / earphones and pump up the volume to hear better. And once it says “connected”, I’m now ready to test out some audio performance, latencies and distance, just like I did to my Awei Bluetooth speaker.🙂🎧🔊🎚️

BTW #2: This is my 2nd attempt to connect Bluetooth audio with my headphone, because the 1st one was a bit long than the 2nd.

#3: Here’s what it looks like. My Honor 8C phone didn’t focus well during recording video.↓

• As I test out a volume adjuster sound I noticed that there’s a beep sound when I reached 100 or maxed out volume with my mouse to drag 🎧🔊🎚️🖱️. The volume buttons from my headphone didn’t work without any media window task opened or in youtube on the browser task. Not to mention that the pause/play button from my headphone didn’t work as well. It’s kind a bummer to me because my Awei Y200 Bluetooth speaker can adjust the volume with the touch control without opening any media task or youtube on the browser task. So I guess to need to open any media in order to adjust the volume hearings.🎧🔊🎚️

• As for the audio performance and latencies ⏱️🎶, it seems very okay 👍. I haven’t seen any problems whatsoever; especially when I open some sync audio test, the audio timing is perfect.⏱️🔊 From listening music on youtube and groove music from my Windows 10 PC, watching videos on both VLC (just once) and not to mention the first one to gaming audio while I’m playing games on emulators and PC games, it seems to me that I haven’t encounter any latency issues on connecting my wireless headphone at all - so it’s very impressive to say.😊👍

• Unfortunately not at all games that hasn’t latency issues... You see, while waiting to load GTA V online I was gonna grab some hot beverages when I notice some audio cuts, making it a bit delay on audio. The only thing to solve this problem is reconnect by turning off and on my wireless headphone in order to fix this situation, no biggie though.⚙️🔧🎧

• Sadly in Red Alert 3 while connecting my wireless headphones, I didn’t hear the sound at all...Literally.😟🎧🔈❌ I tried to restart my PC and the result was the same, so there’s nothing I can do, but plugging wired with my Auxiliary audio cable (of the same brand [CLICK ME!]) as my alternative solution/way, no problem at all.

• GTA San Andreas standalone on the other hand, same perform well as GTA V Online. Both GTA SA and V Online have noticeable late audio, but it seems fine well nonetheless.🙂🎧

• As for my experimental audio distance 📏🎧, well when I reach to 15 to less than 20 meters I was surprised 😮, it achieved the same distance as my wireless speaker (of the same brand) 📻🎧. However unlike my Awei wireless speaker, my Awei wireless headphone had suffer audio cuts/hiccups when I over reach the distance but it doesn’t effect the latency issues while listening music/video, so it can keep up (I think). Although I would prefer my Awei wireless speaker for a better overall 📻, but in case that my wireless speaker’s battery runs out and it needs to charge I would go wear with my headphones while doing something.🎧🎵🙂

• Uh yeah, I even toying the play/pause button with my headphone without noticeable latency issues on both close and/or far meter distance from my PC.🎧⏯️📏

Overall: • I enjoy some connection test with my UGREEN Bluetooth adapter and my Awei wireless speaker.😊🎧📶🖥️ Like I said before, this is far better than my old built-in Bluetooth card module from my old Lenovo laptop. And much like In my previous part posts, it pretty worked well for my headphone. And to think, this is what I need though; I don’t need to bring out my audio cable and plugging through my PC, because my UGREEN USB Bluetooth adapter had a superior wireless connection.📶 And even though they have some bit delays, I could reconnect it anyways - so there’s that.

There’s so much to do for my UGREEN USB Bluetooth Adapter, and hopefully I will finish it this topic before I proceed or continue my other topic reviews. Once again, hope I will try some other wireless devices very soon.😊🎧🎮📱

Well, that’s all for now. If you want to see related posts about that, I’ll provide some links down below.↓😉

UGREEN USB Bluetooth Adapter: • Unopened parcel [Nov 9, 2020] • Revealing item (Recorded Video) [Nov 9, 2020] • Part 1 [Dec 5, 2020] • Part 2 [Dec 15, 2020] • Part 3 [Jan 14, 2021] • Part 3.5 [Jan 14, 2021]

My New Headphone - Awei A780BL w/ Chowder and Panini (May 30,2019) [Part 3 - Final]

Here are my last part for my new headphone Awei A780BL.🎧😁

There’s also a bold plastic beside the metal part of the headphone, if only a full metal part could be better but I guess this is okay. Can’t argue the design and quality though.😊 Here’s also the rest of my photos, both night and normal mode w/ a flash; I guess it’s nothing special. Except my beloved Paper Dolls appreciates my new smartphone and can’t wait to try out the sound quality.😁

Hey speaking of, I’ll be recorded another video for the bluetooth connection with my new smartphone the Honor 8C and my thoughts about the sound quality coming tomorrow or I should say next month (June). 🙂

So that’s all I could say now. In case that you already ,missed it I’ve already provide some links down below. ↓😉