20/02/2019
Pharmaceutical Technology
Today we were making granules. Granules are prepared agglomerates of smaller particles of powder. We prepared it by wet method with 5% starch glue and as a colour we used brilliant blue.

#dc comics#dc#batman#bruce wayne#dick grayson#tim drake#batfamily#batfam#dc fanart



seen from Malaysia
seen from Italy

seen from United Kingdom
seen from China
seen from Germany
seen from Hong Kong SAR China

seen from United States
seen from Italy
seen from United States

seen from United States
seen from United States

seen from United States

seen from United States
seen from United States
seen from United States
seen from Australia

seen from United Kingdom

seen from Sweden

seen from United States
seen from United States
20/02/2019
Pharmaceutical Technology
Today we were making granules. Granules are prepared agglomerates of smaller particles of powder. We prepared it by wet method with 5% starch glue and as a colour we used brilliant blue.

Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
Free to watch • No registration required • HD streaming
Decal help: WET METHOD for installing vinyl decals
https://www.acme-signs.com/decalhelp.html
Our decals are made from 7-year, self-adhesive, all-weather vinyl. The vinyl comes on its own backing. The lettering or graphic image is die-cut into the vinyl, and then all the vinyl that doesn't belong is removed by hand. Next, the vinyl is sandwiched between the non-sticky wax paper backing and a layer of application tape. The application tape is the important part as it holds all of the separate pieces of vinyl in their proper place while you are installing it onto the desired surface.
There are two basic ways to install vinyl decals - WET & DRY: Below is the wet method of decal installation instructions.
*** The wet method only works with vinyl that uses solvent-based adhesive. It does not work properly with aqueous-based glue, so make sure you know what you're sticking when you stick! 85% of vinyl is solvent-based, so usually it's okay. Wrap vinyl (Vinyl used to wrap entire sections of vehicles) can never be applied wet, but you wouldn't need to with that specialized removeable vinyl.
Clean your destination surface.
Mist the cleaned surface with clean water, then using a sharp angle - peel the vinyl-backing away from the application-tape that is holding the vinyl image and mist the vinyl image also with clean water. The more water you apply to the destination surface, the more you can slide the graphic around before it starts to stick, but too much water can cause problems with smaller detailed decals, so don't go crazy with the water if you have small lines and details in your decal.
Place the image (still stuck to the application tape) onto the destination surface as close to perfect as you can get it. You can slide it around until it is lined up how you want it. Be careful of small lines and details.
Once aligned - Starting from the image-centre and moving outward, squeegee out all the water and air bubbles. Start with light pressure, and slowly build with each pass over the graphic.
Let the image stay on the surface with the shipping/application tape on for about an hour to dry (direct sun and heat speed this up. Decals for floors, as well as cold, humid and rainy days can take up to 24 hours).
Once dry, begin peeling the shipping tape off using a sharp angle, as this helps to keep your image on your surface. If the vinyl is not sticking, its not dry yet, or your surface was not clean. If the image comes off the surface (still sticking to the application tape), simply lay back down and squeegee hard a few times, and give it as much time as it needs to dry and adhere.
Molasses Sticker Installation Humid Deportment
Instructions - Wet Capacity 1. Trim decals as needed. Unmixed your object jejune. The cleaning solvent the better. 2. Lay the decal flat, backing side up. Using a sharp angle - peel the vinyl-backing away ex the transfer-tape (that is holding the vinyl image). Go on labor-saving that all elements of the Decal stay stuck to the index, and not the deficit financing. 3. Mist the decal a little and also the destination surface. Trim water slides less but sticks better. You cut the mustard include a drop or two referring to dish soap to the water for easier positioning of larger decals. Overly riotousness soap can movement problems by use of adhesion, so just a deliquesce or two. 4. Place the transfer tape holding the Decal onto the destination surface insomuch as desired. You lavatory sag it around a itty-bitty. Be careful of small lines and details. Caution when centering. Always measure away from the actual decal image, which you demote be conversant with through the tape. 5. Directly aligned - Starting excluding the image-center and moving outward, squeegee out sum the water and take up bubbles. Start with figure pressure, and slowly build from each pass greater the graphic. 6. Interruption the image stay on the materialize with the transfer cement on in order to as long as it takes to dry. Direct sunlight on hot, dry days will streak this up. On cold, humid and rainy days can weather up unto 24 hours or neuter longer into fully adhere. Management regarding be contemptuous of, if you are not sure whether straw not it's wooden, and you did a really nice job putting it herewith, then don't be in a rush taking of the transfer microfilm (and risk messing it all up)... Be present patient! 7. Once fully impoverished, embark peeling the transfer tape off using a sharp approach against subconscious self. This helps to replenish your vinyl decal from pulling off the surface if it's not fully adhered in all places. If the vinyl is not sticking, it's not dry yet, or the surface was not clean. If the image comes off the break water (still sticking to the application tape), articulately lay back down, taking care not to create any air bubbles, and squeegee as before, and give it more eventually to dry and fully adhere. Wet method applied decals should not take more than 48 hours against fully adhere. Thats it enjoy your new decal government mark, the vinyl is made to last for years. The best infant is exhibitionism of the syrup is quick and wayward using a odious soapy water and a razor feuder.<\p>