#water sampling

A complete Ezyflow™ water sampling pump system is available for purchase. We have all types of water sampling equipment.A basic system has a foot valve and tubing of the proper size. Pumping actuators, surge blockers, and other accessories are also available.

Operation of an Inertial Pump at a Basic Level

Foot valves from ERE inc. can be used for traditional sampling and are operated in the usual way. A foot valve is connected to a length of tubing to make the pump. To use this pump, follow these steps:

The tubing/valve assembly is in place. The water level in the tubing rises to the same level as in the well.

A quick upstroke closes the foot valve and raises the water column inside the tubing by the stroke length.

Due to its momentum, the water column continues to rise after the end of the upstroke. As a result, a second column of water is sucked into the tube at the same time.

Due to the inertia of the water column, pushing the tubing down immediately after the upstroke forces a new column of water into the tube.

Water quality control is a critical aspect of public health, industrial processes, and environmental conservation in Nepal. With increasing urbanization and industrialization, ensuring the quality of water resources has become more challenging. One of the most effective ways to monitor and maintain water quality is through water sampling. This process helps identify contaminants, assess compliance with standards, and guide effective treatment strategies.

Are you looking for the best water sampling equipment on the market? If that's the case, the Ezyflow Water Sampling pumps from Environmental Remediation Equipment Inc. are ideal. It is capable of exceeding your expectations. It contains a lit ON/OFF indication, an IP54-rated control panel, and can capture samples up to 7.9 meters deep (26 feet).

Solinst Peristaltic pump is great for removing samples from shallow wells and surface water because it was made for vacuum pumping or pressure delivery of liquids or gases. The suction lift limit is the only restriction on the mechanical peristaltic operation, which is effective down to depths of 33 feet (10 metres) at sea level. With 5/8-inch tubing, the variable pumping rate can supply from 120 ml/min to 3.5 L/min or 40 ml/min to 900 ml/min. 

The 10 amp circuit breaker on the reversible, variable speed motor is simple to reset. Pump head tubing examination is made simple with a clear pump head. 

1.The Solinst Peristaltic Pump includes an inbuilt forward/reverse, variable flow dial with a central detent and an OFF state. When turning the unit off, make sure the dial snaps back into place.

2. When the pump is connected to a power source or stored, the control should always be in the OFF position.

3. Once connected to a power source, control the flow by turning the dial in the desired direction.