#veymax

Electric skateboards combine the comfort, stability and grip of a cruiser with the ease of use of an electric motor. These boards are becoming increasingly popular among beginners and pros alike, and it's not hard to see why. Read on to learn about some of the benefits of electric skateboards.

Reduce commuting time

Do you spend too much time stuck in traffic? With an electric longboard, you'll be able to avoid traffic and get to where you need to go in no time, while enjoying the fresh air along the way.

Enjoy the ride

Since electric skateboards don't require legwork to provide power, you won't feel as fatigued during the ride. And you don't have to worry about charging it for too long; just plug it in and run it overnight for about 4-8 hours, and then you're good to go. Electric skateboards offer great comfort and stability and are perfect when combined with an electric motor if you want to develop your skills on a boat.

Save money

If you find your fuel bills and car maintenance bills are increasing, you can have peace of mind with an electric skateboard. Electric skateboards are economical and energy-efficient, so you can travel in comfort without burning a hole in your pocket.

Move more

If you find yourself too busy to exercise and would rather rest than exercise after a long day, an electric skateboard might be the answer. With the help of electronic boards, you will get the exercise your body and mind need. The continued focus on maneuvering the board and shifting body weight involves movement and balance.

Do your part for environmental protection

Unlike cars, electric skateboards don't leave much of a carbon footprint. An e-skateboard with a longer range doesn't need to be charged every day, so it doesn't require a lot of electricity - helping you save the planet.

The lithium-ion batteries used in most electronic devices (cell phones, laptops, etc.) as well as electric skateboards are sensitive to:

- Use (charge and discharge)

- How we store them when not in use

- high temperature

- very low temperature

- Moisture

Here are some tips for storing electric skateboard batteries

1. How to use (charging, discharging)

If you can avoid full discharge and full charge, the life of the battery will be extended. The most effective method is to use the battery until it reaches about 20%, and then charge it to about 80%. Of course, in real life this is not always possible, as sometimes we need 100% capacity, but in many cases we can achieve this by planning how we will use the electric skateboard that day. If we use and completely discharge the battery, it is very important to charge it as soon as possible.

2. Longer storage time

If you don't plan to use your electric longboard for a long time (say more than two or three weeks), it's best to charge or discharge the battery to 40 - 50% and leave it that way (according to the Battery University website, the optimal storage charge is 40%). A good storage temperature is about 10-15 ℃ (50-60 ℉), but room temperature is also fine (generally between 5 and 25 ℃ (40-77 ℉)) if long-term storage is required and, if possible, every Every few weeks, up to a month, it is better to turn on and rotate the motor for a minute or so, as well as insert the plug into the socket, for example 10-15 minutes. The worst thing that can happen is a completely drained battery and no charge. Keeping them fully charged is also detrimental to their lives, so these scenarios should be avoided as much as possible.

3. High temperature

Very high temperatures are bad for batteries and can even be dangerous. Don't place your veymax electric skateboard and equipment in hot places, keep them out of direct sunlight during hot months, and never leave them in a car parked in the sun during the summer. The temperature inside the car may exceed 50°C, or even exceed 70°C (over 150°F), which is very dangerous because at such high temperatures, the battery can release toxic gases and even catch fire.

4. Although low temperatures around zero and below are not as bad as high temperatures, they are also detrimental to battery life and performance.

5. Moisture

Storing them in a dry place with good ventilation can protect lithium-ion batteries from rapid self-discharge and corrosion caused by moisture. If possible, it's best to place them on a wooden surface rather than a metal surface.

While electric skateboards are fun, they can also be dangerous if used irresponsibly. Here's the safety guide of Veymax electric skateboard.

Don't forget to wear a helmet

We've been wearing helmets since we were kids first learning to ride a bike.

The effectiveness of helmets is debated, and numerous studies have been conducted to measure whether helmets can protect the brain from injury in an accident. But in low-impact crashes, such as those more likely to occur while riding an electric longboard, helmets have been shown to be very effective at preventing brain damage.

I would never ride without a helmet on.

More protective gear

Wearing a helmet is absolutely essential. Also, knee pads, elbow pads, gloves, and even a protective t-shirt are necessary.

Most importantly, I always highly recommend wearing protective clothing such as elbow and knee pads and a good pair of gloves.

They'll make a huge difference between being able to get back up and riding again and having to go to the ER for stitches.

A fall meant weeks of inactivity and my family and I couldn't afford that to happen.

Although electric skateboarding is a very fun and exciting activity, it presents a serious risk of injury. We could be seriously injured by falling on the hard tarmac. The best way to avoid injury and damage to our bodies is to wear proper protective and safety gear! If you do realize the risks, when you buy your first circuit board, you also buy protective gear. Please do not leave your local store or online store without a helmet, knee pads, elbow pads and gloves. To ride safely, we should wear protective gear and safety gear! I have done a lot of research and in this article I am going to present the most reputable and reliable electronic skating protective gear.

We definitely need helmets when riding electric skateboards. Knee and elbow pads are also a good thing. Gloves are very practical and also reduce pain. I would never recommend protective gear that has not been proven safe. Even though safety is by far the most important factor in choosing protective gear, I only choose safety gear that doesn't make us look like fools!

1. Wear a helmet and protective gear.

Electric skateboards are faster than traditional skateboards. Once you fall from above, you will be injured. Therefore, it is very necessary to wear protective equipment such as helmets, knee pads, and wrist pads. Also, make sure that the helmet is sized for the age of the wearer and adjusted so that it fits snugly on the head for maximum protection.

2. Check your electric skateboard.

The entire board should be carefully inspected before each ride. Tighten loose parts and replace damaged parts. Turn on the motor and do a test run to make sure the motor is running properly and the brake is not damaged.

3. Regular basic maintenance, especially the brakes.

Regularly service your electric skateboard after every ride. Check the tightness of your wheels, bogies, brakes, bearings, remotes, batteries, bogies, and even tighten all the screws on your electric skateboard. (especially when riding on rough roads)

4. Use the correct riding posture.

The riding position is divided into a normal position and a silly position, that is, the left foot is in front or the right foot is in front. Correct posture can allow you to better control the skateboard and stay away from danger.

5. Ride in the right weather.

Electric skateboards are not completely waterproof. If you're driving on wet roads with heavy rain, your board could get water and then short out and be damaged. In addition, severe weather such as rain, snow, fog, and freezing is not suitable for riding, because it is easy to cause accidents.

6. Ride at night and make sure others can see you.

When driving at night, in order to ensure your safety, you need to install a headlight on the skateboard, with a reflector on the back so that other roads can see you. In addition, it is possible to wear reflective clothing and install lights on the helmet.

7. According to your skills, choose the appropriate speed.

Riding beyond your skill level is very dangerous, especially at high speeds where swaying can occur. If not handled properly, you will be at risk of falling. Before riding, please use the remote control to adjust the skateboard to the riding mode that suits you. In addition, practice more and improve your technical level to avoid this from happening.

In conclusion

Everyone knows that an electric skateboard depends on its battery to run. If you don't charge your battery, your skateboard will essentially be a manual kick skateboard. So it's understandable that manufacturers take so much time when choosing the right batteries for their e-skateboard models.

Now, electric skateboards with lithium-ion batteries are popular, but some manufacturers still use lead-acid or lithium manganese.

Let's take a look at each battery type in more detail.

Lithium-Ion

This electric skateboard battery type is so popular because it stores a lot of energy for its physical weight, which means manufacturers can create longer-lasting electric skateboards. Better still, lithium-ion batteries have an excellent charge/discharge lifespan, which is why many manufacturers choose to implement them.

Lithium Manganese

While the lithium-ion battery is a popular choice, some manufacturers, such as Dualtron, choose lithium manganese as an alternative. Manganese can maintain low temperatures but still offers a high energy output, so it's a safe option for skateboards.

Lead-Acid

Time to switch to an electric skateboard for commuting. Instead of driving a car, it is better to go oil-free and protect the environment. You can choose a skateboard by installing unrivaled brakes and wheels on your feet.

In many countries, many people have switched to environmentally friendly electric skateboards to go to the office or other places. You too can take this big step and love the polluted environment. You can buy the one that suits you better. In the articles that follow, we'll discuss the various reasons to leave your car and switch to an eco-friendly option. It's worth investing your money in a skateboard you'll never regret. Let's discuss these reasons.

An electric skateboard is much more affordable than a car and doesn't require insurance or registration.

It is incredibly lightweight and portable, making it easy to transport and store.

Electric skateboards are extremely energy efficient, resulting in fewer emissions and fewer trips to the gas station.

Using an electric skateboard for commuting can be extremely fun, allowing you to have an enjoyable journey to and from work every day.

Why is riding electric skateboards eco-friendly?

Riding electric skateboards is eco-friendly because they require no gas or emissions, reducing air pollution. Additionally, electric skateboards help reduce dependence on fossil fuels, which have a negative environmental impact. Electric skateboards also produce zero carbon emissions, helping to reduce the global CO2 footprint.

Skateboarding can be a fun and exhilarating sport, but like any other activity, it takes effort to maintain your skateboard to keep it in tip-top condition.

Clean your skateboard after every skate session. This will help remove dirt and debris that can cause damage to your board. You should also regularly inspect the bolts, nuts, and screws on your board and tighten any loose ones.

Use the right lubricant on your board's bearings to keep them running smoothly. When your board needs new wheels or bearings, make sure to use quality parts that are designed for skateboarding.

Wax your board deck periodically; this will keep it smooth and provide extra grip and control when skating. If yours is an electric skateboard, you need to replace the grip tape regularly, usually every 2 to 3 months.

Taking care of your skateboard following these steps will help it last longer and give you years of skateboarding fun!

Skateboarding has been popular for several decades. However, in recent years, it has transformed into a mode of transportation, especially in urban areas. Skates provide a convenient, low-cost, and environmentally friendly way to move around the city. Traditional skateboards have always relied on the physical energy of the rider. But with the introduction of Electric Skateboards, riders can now experience a new level of convenience and efficiency.

The main advantage of electric skateboards is that they provide increased power, which can help you cover more ground in less time without having to use your own energy. Electric skateboards also have adjustable speeds, allowing you to take it easy on hills or go as fast as you need. On the downside, electric skateboards tend to be more expensive than regular skateboards and require more maintenance.

Riding electric skateboards for short-distance transportation is eco-friendly.

Choosing to use an electric skateboard can be a much more eco friendly choice. Unlike gas powered vehicles or older electric vehicles, the battery technology here is efficient and you will be supporting an electric vehicle that is better for the environment. If you would like to learn more about Lacroix brand electric longboards, be sure to check out our product pages today!

Eboards can be easier to ride than skateboards.

Because you can control the movement without having to constantly push off, these are devices that can be much easier to master than a skateboard. If you have always struggled with balance and getting your corning skills figured out with a skateboard, these are devices that will give you everything that is needed to master the handling.