#veppocig

http://howthesuorinairworks.com/suorin-air-instructions/

Cleaning the Suorin Air should not take much time at all. The designers of the device intended for it to be as simple as possible.

Remove Cartridge

The most important area of the device to keep clean are the metal pins on the bottom side of the cartridge.

These two pins are the connection to the battery that allows for the cartridge to turn the e-liquid into vapor. When filling the cartridge, it is not uncommon for small amounts of e-liquid to spill out from the sides and onto these pins.

Clean the Pins

When these pins get e-liquid on them, they can weaken the connection to the battery resulting in reduced battery life, a weaker hit and more battery strain.

Cleaning the Suorin Air should be done a regular basis.Gently clean the Suorin.

Take a paper towel and wipe away any residue or debris that may have leaked onto the pins. If you keep the device clean, the battery will last for a long time, and the Suorin Air will consistently produce quality draws.

The coil: The coil holds the wick which needs to be moistened before use. The wick absorbs the e-liquid before heating and release.

Atomizers: The part of the vapor cigarette where the eliquid makes direct contact with a coil. This coil is wrapped around some form of wick, often cotton or rayon.

Cartomizer: A fully self- contained, coil-based setup where a predetermined amount of juice is soaked into a wick. Once this liquid has been depleted, the entire unit is designed to be discarded. You do not refill the pre-filled cartomizers with e-liquid. However you can purchase refillable cartomizers to refill your self. Cartomizers are most commonly associated with the “vapor cigarette,” “cigalike,” or “cigarette-like” style of units. These units are great for people new to vaping or those who have little to no experience with vaping.