#tileprojects

Stick to quality with our tile adhesive - the perfect solution for your tiling needs!

Tile adhesive is an essential component of any tiling project, and it is critical to ensure that the adhesive is applied correctly to avoid costly repairs down the line. However, even with the best of intentions, things can go wrong. In this blog, we will explore common tile adhesive problems and provide solutions to avoid costly repairs.

Poor Adhesion One of the most common tile adhesive problems is poor adhesion, which can result in tiles falling off or becoming loose. Poor adhesion can be caused by several factors, including incorrect mixing, incorrect substrate preparation, and poor-quality adhesive. To fix poor adhesion, remove the affected tiles and clean the substrate thoroughly. Mix a fresh batch of adhesive according to the manufacturer's instructions and apply it to the substrate using the recommended trowel size. Ensure that the adhesive is applied evenly, and the tile is pressed firmly into place. Use tile spacers to maintain the correct spacing between tiles.

Hollow Tiles Hollow tiles are a sign that the adhesive did not bond correctly to the substrate. This can be caused by using too little adhesive or using an adhesive that has passed its shelf life. To fix hollow tiles, carefully remove the affected tiles and clean the substrate thoroughly. Mix a fresh batch of adhesive and apply it to the substrate using the recommended trowel size. Use the flat side of the trowel to apply a thin layer of adhesive, and then use the notched side to comb the adhesive. Press the tile firmly into place, ensuring that there are no air pockets behind the tile.

Cracking Cracking can occur when the adhesive is not strong enough to support the weight of the tile or when there is movement in the substrate. To fix cracking, remove the affected tiles and clean the substrate thoroughly. If the substrate is not level, use a self-leveling compound to even out the surface. Mix a fresh batch of adhesive and apply it to the substrate using the recommended trowel size. Apply a layer of adhesive to the back of the tile, ensuring that the adhesive is evenly distributed. Press the tile firmly into place, and use tile spacers to maintain the correct spacing between tiles.

Staining Staining can occur when the adhesive bleeds through the grout, leaving unsightly stains on the tile surface. To prevent staining, apply a waterproofing membrane to the substrate before applying the adhesive. This will prevent the adhesive from bleeding through the grout. If staining has already occurred, remove the affected tiles and clean the substrate thoroughly. Apply a fresh coat of waterproofing membrane before applying a fresh batch of adhesive.

Stick to quality with our tile adhesive - the perfect solution for your tiling needs