#thepipedr

One of the most challenging plumbing issues a household can face is the need to install a new sewer line. The traditional dig-and-replace methods usually come with a lot of drawbacks. The entire process can last up to weeks, and it requires an extensive amount of physical labor. Not to mention the damaged property you will have to deal with in the aftermath of traditional repairs and how much they add up to your total sum.

Read the full article here: What You Need to Know About Trenchless Sewer Repair Cost

Fortunately, there is a less invasive option to restore your plumbing to its, functioning state. Trenchless sewer pipes can connect you to the main sewer lines without damaging your landscape (or public property) in the process.

Traditional RepairTrenchless Pipe BurstingTrenchless Pipe Lining

What is a Trenchless Sewer Pipe?

A trenchless sewer pipe is a substitution for your existing pipe by applying a minimally-invasive technique to avoid strenuous excavation work. The sewer pipes can be installed by either using the pipe bursting method or pipe lining.

The Average Costs of Trenchless Sewer Pipe Services Versus Traditional Repairs

Trenchless repair methods cost slightly more, taking into consideration the equipment and the expertise that is needed to conduct these repairs. Trenchless sewer pipe repairs cost, on average, $80-250 per foot, while dig and-replace repairs will range from $50-250 per foot. Therefore, trenchless repair jobs will amount to $6,000-$12,000 approximately, and traditional repair jobs will take up $4,000-$13,000 from your budget. For traditional repairs, you might end up paying a hefty amount of money due to the location of your pipe. Your costs can multiply quickly if your broken pipe lies under a street, a sidewalk, or any ground-level component that will need restoration. With trenchless repair jobs, all of the work is underground. There is no need to dig and destroy property or to fear additional repair costs.

A Detailed Overview of Repair Costs

The price point is $50-250 per foot, which can result in around $3,000-$6,000 for small repair jobs. Extensive repairs can range between $5,000-$13,000. However, the costs can accumulate fast in the case of landscaping, long labor hours, or road closure.

As one of the most preferred pipe replacement methods, costs range from $60- 200 per foot. The repair jobs usually cost around $3,500-$20,000. The price will vary from case to case, depending on the size and placement of your sewer pipe. A trenchless technician can replace an entire sewer pipe in a single day.

The average costs of lining your pipe are $80-250 per foot, which results in customers paying from $4,000 to $20,000 for an entire repair.

The innovative technology used for trenchless sewer pipe repairs brings about many benefits. The process is dig-free, efficient, and long-lasting, while it saves you both time and money. If you find yourself in need of a pipe repair or an assessment, you can contact us at The Pipe Doctor. We are a well-rounded company that specializes in repairing and replacing pipes. You can use our expertise when it comes to trenchless repairs, and we will restore your sewer system in no time.

Are You Looking for Trenchless Sewer Repair in Seattle, WA?

If you’re looking for trenchless sewer repair or replacement service call us at The Pipe Doctor and we can provide you with the latest sewer methods and pipe bursting technology. Our trenchless sewer repair and trenchless sewer replacement methods save you on cost and time.

The Pipe Doctor

Phone: (206) 676-2192

Email: [email protected]

Other Plumbing Services

Sewer and Drain Service

Excavation and Concrete Work

Drain Cleaning

General Plumbing

Hydro Jetting

Related Articles

3 Best Ways to Maintain a Sewer Line

How Often Do Sewer Lines Need To Be Replaced?

How to Prevent Sewer Backup

My Cast Iron Sewer Pipe is Rusting and Leaking

The 3 Best Water Main Pipes

What Are the Most Common Sewer Problems for Homeowners?

What is Trenchless Sewer Repair?

What Property Owners Should Know About Plumbing Maintenance

When Should I Request Sewer Repair Service?

Where Does Sewer Waste Go?

Overflowing sinks and drains that don’t function well are some of the common problems that homeowners will face. That being said, regular cleaning of your sewer and drain line should be done to avoid these problems. To prevent this type of clogging from happening, plumbing companies usually handle these plumbing issues by two common methods – either by snaking or hydro jetting.  Which method is better and which should you choose? Let’s try to understand more about each method and the difference between the two so you can decide which method is the best option for your home.

Read the full article here: Hydro Jetting vs Snaking Which Should You Choose?

What is Snaking?

Snaking is a method of cleaning your drain with the use of a plumbing auger. The plumbing auger is a flexible, metal cable with a corkscrew-like coil at one end. It works by inserting the cable into the drain and as it goes further to the drain or sewer line, the corkscrew attached to the end rotates, breaking the clog. Flushing water down the drain is done to ensure that the clog is totally eradicated, clearing the path through the pipe. Plumbing snakes are typically powered by a hand crank and this equipment is commonly used by a professional plumber but it can be rented if you plan a DIY project.

The snaking method has been tried and tested by professional plumbers for years. It’s an easy procedure that can be done on your own. It won’t damage fragile pipes, hence it is more safe to clean old pipes. However, the clog removal capabilities are limited. Snaking is only effective for simple clogs but it won’t guarantee the removal of build up along the lining of the pipes. Since it only resolves simple clogs, it will only provide temporary fix in your sewer or drain lines.

What is Hydro jetting?

Hydro jetting is a sophisticated method in unclogging drains by making use of a high pressurized water stream, powerful enough to remove hardened debris and blockages like tree roots and grease. Hydro jetting can, and should, only be performed by a professional plumber because they use high-tech tools that only experts have the knowledge to operate. They will initially perform camera inspection to determine the location of the blockage inside your pipe. Once it is located, a hose is inserted into the drain while the water jet stream is turned on destroying all gunk, grime, and debris within the pipe.

Which should I use for a clogged drain?

If you’re experiencing a clog that is too stubborn for your plunger, then snaking is your best chance in clearing it out yourself. Keep in mind that there are two variaties of plumbing snakes. If you have a clogged drain in your bathroom and kitchen sinks, snaking a drain with a straight auger is effective. Meanwhile, an auger with a J-bend is typically used in toilet bowls with clogged drains.  

A standard 25 or 50 foot drain is used for most sink clogs and a mini rooter may be necessary if your house runs a very long drain. Regardless of the type, all drain snakes use a cable with specialized ends that functions to cut through the source of the clog.

However, for something more serious and if you’re looking for a long-lasting solution, we recommend hiring a plumber near you to provide hydro jetting service.

Which should I use for a clogged sewer?

When there is the presence of tough build-up, resulting in more serious problems,  and snaking is already not effective to get rid of clogs, then hydro jetting may be a great choice. Business owners like restaurants will benefit if there is regular hydro jetting to remove food particles and grease build up. Hydro Jetting is best for recurring clogs and prevents future clogs from forming.

Looking for an affordable Hydro Jetting Service in Seattle ? Call The Pipe Doctor!

At The Pipe Doctor, we provide effective and affordable hydro jetting services for the Seattle community. Hydro jetting is an eco-friendly and super effective way of cleaning your sewer and drain line. By unleashing close to 5,000 PSI of water we’re able to blast away any intrusions or obstructions in your water line.

The Pipe Doctor 12345 Lake City Way Ste 311 Seattle, WA 98125 (206) 676-2192 [email protected]

Related Articles:

What is Hydro Jetting

3 Best Ways to Maintain a Sewer Line

How Often Do Sewer Lines Need To Be Replaced?

Pipe Repair Overview

What is Trenchless Sewer Repair?What You Should Know If Your Home Was Built Before 1975

What You Need to Know About Trenchless Sewer Repair Cost

When Should I Request Sewer Repair Service?

Where Does Sewer Waste Go?

External Links:

Instagram

Blogger

Twitter

Pinterest

Tumblr

Wordpress

Cast iron sewer pipe has been the popular option of sewer lines for homes built before the 1970s due to the following reasons:

Pipes made of plastic are not yet available during that time

Cast iron pipes have a long lifespan that can last between 80-100 years

Cast iron sewer plumbing is sturdy and can hold out against heavy loads or high pressure

The type of material used for this pipe helps in reducing the sound of water and sewage flowing very well. It can resist heat

It can resist heat

Here are the following signs to watch for to help you determine that your cast iron sewer pipe is rusting and leaking: 

Signs of a rusting and leaking cast iron sewer pipe

Sewage backups and slow drains

The sudden presence of green patches in your lawn

Foul-smelling odor

Structural damage

Presence of molds in the walls

Indentation is seen in your driveway or sagging

Presence of insects and rodents in your home

Water discoloration

How to repair a cast iron sewer pipe

Structural pipelining (also known as cured-in-place-pipelining or CIPP)

Pipe bursting

Traditional sewer repair

However, for an extensively damaged pipe that cannot be resolved either by pipelining or pipe bursting, the only option is the traditional sewer repair which means concrete excavation and digging. 

If you’re looking for affordable and reliable sewer services in Seattle, don’t hesitate to give us a call or shoot us an email at The Pipe Doctor! We offer different sewer services such as sewer repair, sewer inspection, sewer cleaning, and sewer replacement. If you are looking for affordable and reliable plumbing and sewer experts, don’t hesitate to give us a call or shoot us an email!

The Pipe Doctor Professional Sewer & Drain Company Address: 12345 Lake City Way NE Ste 311, Seattle, WA 98125 Phone: (206) 676-2192 Email: [email protected] Visit: https://thepipedr.com

External Links:

WordPress     WIX

Weebly           Tumblr

Jimdo             Blogspot