#teeesir

1.Print materials will pass through a screen print film (usually fixed onto a wooden print frame) and then print the desired logo on the garment panels. As the print material is some kind of paint which is in semi-liquid form and squeezed through the print film, the logo could be a bit diffused around the edges. If the logo design is too small and detailed, these detail locations may become blurring due to the diffusion effect. For example:

? The logo includes very small fonts of Chinese and English Characters.

? The logo is of fully-filled and the pattern inside is close to each other.

? General suggestions are that English letters and Chinese characters should be at least with height 3mm and 5 mm respectively. The logo should not be fully packed with detail and complicated patterns.

2.Silk Screen Print exhibits the logo in SOLID (實色) color form. Therefore, it is hard to apply screen print for logos which have gradient and shadow effect (e.g. like photo quality). If customers would like to achieve multi-colored logo with photo-quality effect. Digital printing or heat transfer printing should be applied.

3.Individual print FILM and FRAME must be issued for each silk screen print color. Therefore, price will increase in proportion to the number of colors in the logo.

4.In general, water-based screen print (水漿絲印)should be applied for white and light color fabric. While  oil-based screen print (膠漿絲印) should be applied for black and dark color fabric.

Oil-based Screen Print (膠漿絲印):

? Diffusion effect is considerably more obvious, and the paint will extend to areas where it is not supposed to have the logo design or overlap with other patterns inside the logo (e.g. the logo is with a complete pattern but with many small areas inside the logo which show the fabric as ground color, then such diffusion effect may fully fill up such small areas which resulted that the entire logo is blur.).

? Also, when the logo is printed and at the time the paint is still wet, there is possible that dust in the air may fall into the logo area and being trapped in the logo, thus result in some dusty & hairy effect on the logo.

? Oil-based screen print exhibits a layer of plastic-like coating on top of the fabric surface. This layer of coating has potential to have small cracks and color fading after repeated washing; this is due to the physical limitations by the nature of the product.

Water-based Screen Print (水漿絲印):

? Water-based paint will be directly absorbed by the fabric, thus colorfastness is better. However, the garment will become washed out after repeated usage and washing. Therefore, the logo colors will also fade as time goes by.

Gold / Sliver Screen Print (印金或印銀): ? Logo color is matte when compare with gold or silver foil print, but colorfastness is better.

Gold / Silver Foil Print (燙金或燙銀): ? Applied to the garment fabric panel by heat with a kind of gold / silver foil material, the limitations are that it is possible that the logo may slightly peel off and become duller after washing. The situation could be minimized by turn inside out and use cold water in washing.