GE / Alstom SKE11BF8045BCH Relay: Technical Specifications & Working Principle
Electrical power systems behave like orchestras. If one generator enters the performance even slightly off tempo, voltage instability, equipment stress, or major system disturbances can follow. This is where the GE / Alstom SKE11BF8045BCH Check Synchronising Relay becomes essential. Designed for generator synchronisation and protection applications, this relay ensures two power sources meet predefined synchronisation conditions before circuit breaker closure occurs.
Q1. What is the GE / Alstom SKE11BF8045BCH Relay?
The GE / Alstom SKE11BF8045BCH is an electromechanical check synchronising relay used to verify whether incoming generators or interconnected power systems have acceptable voltage, frequency, and phase differences before connection. It prevents unsafe synchronisation conditions that may damage generators and switchgear.
Q2. Why is a check synchronising relay important?
A check synchronising relay protects electrical systems by ensuring:
Voltage difference remains within acceptable limits
Frequency mismatch is controlled
Phase angle difference is within preset values
Circuit breaker closure occurs only under safe synchronisation conditions
Incorrect synchronisation can result in severe mechanical and electrical stress on generators, transformers, and associated equipment.
Q3. What are the technical specifications of the SKE11BF8045BCH relay?
Key specifications include:
Relay Type: SKE11 Check Synchronising Relay
Protection Type: Check Synchronising
Technology: Electromechanical Relay
Auxiliary Voltage: 30V DC
Frequency: 50 Hz
Contacts: 2 N/O S/R
Mounting: Flush mounting
Phase Characteristic Angle: 10 Degrees
Voltage Setting Range: 2โ10% adjustable volts
Operating Delay: 0.25โ1.5 seconds
VT/PT Secondary: 63.5/110V AC
Case Size: 1D V 20T
Flag Indicator: No
Wiring Diagram: MBDZ608-1
Outline Diagram: MFJ012
These parameters support reliable synchronisation in industrial and power generation applications.
Q4. What is the working principle of the SKE11BF8045BCH relay?
The relay operates by continuously comparing:
Phase difference
Frequency difference
Voltage difference
Only when these values fall within predefined limits does the relay permit breaker closure. The relay contacts are generally connected in series with breaker closing circuits.
Q5. How does phase difference measurement work?
Phase measurement is achieved through algebraic subtraction of two voltage waveforms. The resulting beat waveform is compared with a DC reference voltage.
If measured values remain within acceptable synchronising limits, the relay sends an output signal allowing operation. This design ensures phase measurements remain independent of normal voltage variations.
Q6. How does the relay measure frequency difference?
Frequency difference is determined by observing whether the phase angle traverses beyond a predefined value within a calibrated timing interval.
An internal timer evaluates this condition. If synchronisation requirements persist throughout the timing cycle, relay operation occurs.
Q7. How is voltage difference monitored?
The SKE relay compares incoming supply voltages and blocks operation if voltage differences exceed configured limits.
This protective function prevents unsafe breaker closing during abnormal voltage conditions.
Q8. Where is the GE / Alstom SKE11BF8045BCH relay commonly used?
Typical applications include:
Generator synchronisation systems
Power plants
Industrial substations
Switchgear panels
Utility transmission systems
Manual generator synchronising operations
Q9. What is the difference between SKD and SKE relays?
The SKD series is commonly used for automatic reclosing sequences, whereas SKE relays are intended primarily for manual generator synchronisation applications.
Q10. What are the major features of the SKE11BF8045BCH relay?
Important features include:
Low burden operation
Static measurement capability
High accuracy
Resistance to transient disturbances
Ability to withstand impulse voltages up to 5 kV
Reliable synchronisation protection
Q11. What does adjustable voltage setting from 2% to 10% mean?
The adjustable setting allows engineers to define acceptable voltage mismatch tolerance between systems before synchronisation occurs.
This flexibility improves compatibility with varying operational requirements.
Q12. Why is operating delay important in synchronising relays?
The delay setting, ranging from 0.25 to 1.5 seconds, helps avoid false operations caused by temporary fluctuations or transient disturbances.
Q13. What mounting arrangement does the relay support?
The SKE11BF8045BCH relay supports flush mounting, simplifying installation within protection and control panels.
Q14. How does this relay improve system reliability?
The relay improves reliability by:
Preventing incorrect synchronisation
Reducing generator stress
Protecting switchgear components
Minimising outage risks
Supporting stable power transfer between systems
Q15. Is the GE / Alstom SKE11BF8045BCH suitable for legacy systems?
Yes. Due to its electromechanical design and compatibility with traditional protection architectures, the relay is often used in retrofit and legacy installations.
Q16. What maintenance practices are recommended?
Recommended practices include:
Periodic calibration checks
Contact inspection
Wiring verification
Functional testing
Cleaning relay terminals and enclosures
Reviewing timing settings during maintenance cycles
Routine maintenance helps preserve synchronisation accuracy.
Conclusion
The GE / Alstom SKE11BF8045BCH Check Synchronising Relay remains an important protection component for generator synchronisation and power system stability. With capabilities to monitor phase angle, voltage difference, and frequency mismatch, it helps prevent unsafe breaker operations and supports dependable electrical network performance. Its adjustable settings, robust construction, and proven synchronising logic continue to make it relevant for industrial and utility applications. To know more about this product Click here:
