#swengines

The fact cannot be denied that engine is a vital component of the car that makes it functioning possible. And if you like your vehicle, don’t you wonder to know the type of that big piece of metal block that is transporting you from one place to another, driving your car, and giving you a lot of pleasure? Maybe, you have heard that engines are classified according to their layout or configuration. But these are also distinguished as per the power or thermodynamic cycle that is done by the pistons. This is basically defined as the number of strokes required to finish a cycle. There are two more common thermodynamic cycles that include a 2-stroke engine and a 4-stroke engine. Let’s see how these two systems work in a more detailed manner. The 2-stroke engineAs the name sounds, the two strokes are needed by this type of engine to finish a thermodynamic cycle. These are mostly found in motorcycles along with lawnmowers and chainsaws. For every revolution of the crankshaft, a thermodynamic cycle is completed.

Needs a lighter flywheel

The engine is usually     lighter

More mechanically efficient     because of less friction

Engine runs hotter

1:1 power stroke to     crankshaft revolution

Less powerful

Less thermally efficient

The engine comprises an     exhaust port and an inlet port

Less costly than a 4 stroke     engine

The engine operates in a     balanced way because of the 1:1 ratio of the power stroke to crankshaft     revolution

The engine is normally     air-cooled

Noisier

Requires more lubrication

Greater incidence and more     frequent wear and tear

Less fuel efficient

The engine has a simple     design because it doesn’t need any valve mechanism

The 4-stroke engineTo complete a thermodynamic cycle, this type of engine needs 4 strokes which is equal to 2 revolutions of the crankshaft. These are seen in automotive applications like cars, buses, trucks, and others.

More powerful

Needs heavier flywheel

The engine is water-cooled

More expensive than a 2     stroke engine

Requires more space in the     engine bay

More thermally efficient

Greater friction because of     the sheer number of moving parts

Requires complicated     lubrication

Engine runs unbalanced as it     has a disproportionate revolution of the crankshaft relative to the     completion of a single thermodynamic cycle

More fuel efficient as it     permits for the complete burning of fuel

The engine operates with     less noise

Consumes significantly less     lubricating oil

The engine is heavy and     available with a complicated design, and valve mechanism is also included

The engine operates a lot     cooler than a 2 stroke engine

The moving parts undergo     less wear and tear

The engine has valves for     intake and exhaust

Whether your vehicle has a 2-stroke engine or 4-stroke engine, if it has damaged, then select used engines to give a new life to your vehicle. If you want to buy a used engine, no place is better than SWEngines Tulsa OK in the United States as they only have quality products that are available at a cost-effective price. With this supplier, you can easily find the used engine as per the manufacturing year, make and model of your vehicle.

SWEngines Tulsa OK

Have you ever tried to know the engine type that you found in your vehicle? Well, there are different types of car engines available in the present road and racing cars. This number is growing quickly with evolving technologies such as electric and Hybrid motors that are going more advanced.

So, let’s know about the different types of engine layout that mostly come in today’s cars.

Straight Engine

Inline engines have the arrangement of cylinders in a straight line, means one after the other. Nearly all four-cylinder engines are inline or straight and can be built with an ease. The reason is that a single metal casting is enough to mill the cylinder bank and crankshaft and it needs only fewer camshafts and cylinder heads.

This directly implies lower maintenance costs and production. Also, their more lightweight and smaller construction makes these engines design perfect for FF cars (front wheel drive). Comparing to other engine designs such as Boxer, V type and rotary, this design is really fuel efficient. Along with these, some five and six-cylinder straight design engines are also available, which are mostly found in European cars like BMW and Audi.

V Type Engine

This engine design comprises two rows of cylinders that are fixed normally at an angle of ninety degrees to each other. The key benefits of V Type engine include great rigidity of the block, short length, attractive low profile and heavy crankshaft for stability. This engine design is tried and tested and have a huge performance potential. Typically, the designs come in V6, V8, V10 and V12 configurations and particularly in motorsport applications.

Rotary Engine

The Rotary or Wankel engine does not have pistons as it uses rotors in its place. This engine design is compact and small and comprises an oblong and curved inner shape. Its central rotor only goes in one direction, but it generates all four OTTO strokes that include compression, intake, exhaust and power in an effective manner when it rotates.

In today’s time, you will find the Rotary or Wankel engine in Mazda RX-8 and old RX-7 models. The cylinders in these engine designs themselves serve as a flywheel, that’s why these engines gained a considerable power-to-weight ratio benefit over other conventional engines. Another advantage was enhanced cooling because the rotating cylinder block produces its own airflow that is fast-moving.

Boxer Engine

The Flat or Boxer engine has a design with multiple pistons and every piston move in the horizontal plane. The important and well-known layout has cylinders set in two banks on both sides of a single crankshaft that is usually called as boxers. These engines are available with a lower center of gravity over other common configuration, so vehicles having these get benefit from control and better stability during concerning.

Irrespective of the type of engine your car has, the most important thing is to pay attention to the issues that are causing by it. If the problems are serious, don’t ignore and take a decision of replacing it with the used engine that is sold by Southwest Engines. Over the past 27 years, the company has set a hallmark by providing the unbeatable quality used engines at a competitive price.

Have you ever thought which component is most important for a driver or vehicle owner in a car? It is none other than the engine as it is a heart of a car. Without it, your car is nothing more than an exhilarated metal box on the roadside. The role of an engine is to convert fuel into motion that makes the moving of a car possible and you can easily reach your destination. It is important that you make sure the engine is in working condition and good shape.To keep it last long without any problem, it is necessary to maintain it well. Let’s see what is required to keep the engine in good shape. Before this, it is important to know the common causes that result in engine problems:

Using low-quality oil or fuel

Lack of regular oil changes

Overheating

Design and parts flaws

Driving low on oil

Excessive idling, racing, driving only short trips

Why change engine oil regularly?

There is a lot of moving and rotating parts in the engine that needs to be well lubricated and it is kept by engine oil. When you drive, engine oil starts degrading slowly and loses its lubrication as well as carbonizes under high temperatures. With regular oil change, your car’s engine will remain clean and well lubricated. If there will be a long interval between oil change, mechanical wear will occur due to an increase in friction and the engine gradually gets contaminated with sludge or carbon deposits.

Protect your engine from overheating

A lot of heat is produced by the burnt fuel inside the engine. The work of the cooling system is to keep the temperature of the engine under control. The cooling system moves liquid from the engine into the radiator where the coolant is cooled down by the flow of air that passes through the radiator fins. The problem in a cooling system can result in engine overheating and this can lead to severe damage to the engine. 

Use synthetic oil

Many newer cars have a need for synthetic oil as it provides better protection to the engine. The benefit of using synthetic oil is that it can work for a long time by maintaining its lubricating qualities and can withstand higher temperature. At below zero temperatures, synthetic oil does not get thicker and offers amazing engine lubrication at a cold start.

Get a consistent tune-up

If you are feeling lack of power, run rough, misfire or sluggish with your car’s engine, you can make a difference in all these things with a good tune-up. Typically, a tune-up is done for every 60,000-90,000 miles. In new cars, a tune-up includes changing the air filter, spark plugs and cleaning the throttle body. In older cars, there is a need for replacement of ignition wires, distributor cap and rotor and fuel filter.

If your car’s engine is resulting in severe problems, immediately replace it with the used engines offered by SWEngines in the United States. Why? Because the company is well-known for providing the top-notch quality used engines within the budget.

Southwest Engines reviews – Uncover the company’s dedication for customers

Unarguably, engines are the primary and central operating units of any vehicle but unfortunately, no one spends time on looking after their engines. To prevent yourself from facing serious problems and other vulnerabilities, it is important to check the engine regularly and analyzing frequently and providing general maintenance to make them run. Well, there are some components of the engine that…