Every decent #circus has an #illusionist; so I thought that it would have been fantastic to recreate the same circus atmosphere. For the construction of the magician’s table I used plates of beech wood with a thickness of 0.4 mm and 26 bars of 1 cm thick, then are screwed and assembled together. On the top (that it is in carbonglass) there are three automatized boxes that can be opened by small aluminium bars that are connected to servomotor. Boxes are made with 0,4 mm plates of wood. When I will push a hidden button the prestige will begin; the boxes will start to open, by means of a servomotor for single box (the #servomotor make an rotation of 90° and the aluminium bar will lift the top of the box, from the inside) and one by one and from these boxes will come out the puppies peluches decorated in the Sakizou’s style. Inside the Illusionist’s table, hidden by a #velvet #fabric, there is the #mechanism, #arduino and #stepmotors, that with up and down system will carry outside the #peluches that then will be back into the boxes. For the up and down system along the sides of the boxes there are the guides in order to facilitate the movement. Afterwards the construction of the structure I #decorated the boxes with #halfpearls, #gems and #cameos in order to be consistent with the cosplay’s. With #glitter #foam I made the banner of cirque. Moreover for to ease the moving of this on stage, I installed 5 wheels at base and comfortable handles on the sides. #cosplay #ECGSOLO #ecg #ECGFinal #cosplayer #cosplaywip #wip #sakizou #sakizoucosplay #Bianca #lacirque #cirquedumonamour #props #programming #setprops #automatism #electronics #raspberrypi #tech #diy #engineering #engeneer #maker #arduinouno #arduinoday
