#sheenlac

Newly painted walls are always the pride of any home dweller. The fresh and flawless finish makes you want to keep the paint intact forever and show off your home to everyone. But like all things beautiful, walls don’t remain blemish-free for long. Leaving stains on walls is unavoidable. For instance, furniture leaning against the wall can cause marks over time and eventually dull the paint’s shine. But to make stains means to love your home! While this expression of love cannot be taken away from your home and family, we can provide you with solutions to tidy your walls from time to time and help you retain your beautiful walls for as long as possible.

PRE-PAINTING CARE

Similar to meticulously planning a vacation, you need to plan how your walls can be protected best, even before the paint goes on. Here are some important things to take care of:

1) Washable wall paints should be your go-to:

Quality paint that can be cleaned easily, no matter how stubborn the stain is. Jenson and Nicholson’s Robbialac super acrylic plastic emulsion is equipped with high washability and stain-resistant technology. It is also anti-fungal and prevents the formation of mildew in those pesky corners on your walls. Acrylic paints are water-soluble but once dry, become waterproof. This means the paint doesn’t budge or fade away easily when wiped.

2) Don’t forget the exterior:

A strong exterior emulsion paint that can protect your walls in all seasons, especially monsoon, is very important. A water-resistant exterior can ensure that rain does not seep into your home, keeping the interior paint fresh as ever. Constant seepage can lead to fungus and mould formation in walls and can take away the beauty of your home. Jenson and Nicholson’s Decor exterior emulsion paint can serve your purpose and protect exterior walls against bad weather, dust, pollution and algae.

3) Choose the right colour for your home:

If you live in a dry region where dust settles on surfaces easily, choose a darker shade that does not draw attention to dust. If residing in a humid or hot region, choose lighter colours that keep your home cooler. But in case you prefer a darker shade, try and use it in the biggest room in your home, to ensure it doesn’t get hot and stuffy. Wall Paints when selected according to the environment, can last much longer. Jenson and Nicholson’s wide shade range in interior paints and exterior paints can give you a fair idea of what suits your home’s aesthetic and the environment surrounding it.

4) Give your walls a good prep:

After the old paint is scraped off, always fill the holes created and seal it in with a primer, to have a clean canvas that you can turn into anything you like! Jenson and Nicholson’s Acrylic base water thinnable cement primer has good coverage and leaves your walls looking and feeling smooth. Leave the cement primer to dry and set well on your wall and continue with the painting process.

POST-PAINTING CARE

Once your walls have paint on and it dries well, the real work begins. While keeping walls clean is easy and subjective to your preference, it is always better to keep your home looking spic and span for guests to feel comfortable in and for you to always have a happy mood at home!

1) A clean house results in clean walls:

Regularly vacuum your floors, furnishings, mats, rugs and walls to maintain the paint. While sweeping with a broom is accepted, vacuuming is best when dealing with dust. Additionally, make sure you mop the house with a wet cloth or a mopping stick at least thrice a week. Also, clean your entire house once in 4–6 months. This ensures that dust does not settle or fly around too much and your walls look happy.

2) Protect your walls from harsh/direct sunlight:

It is always better to have film on your windows or to keep them closed with light curtains to protect your wall paints from damage due to harmful UV rays. Paint tends to fade when subject to direct sunlight. So it is always better to pay attention to your windows and doors.

3) Make your furniture wall-friendly:

Installing bumpers behind your sofas and dining table chairs is always a good idea. Additionally, you can invest in slip-proof mats/rugs that prevent your sofas from hitting the wall too much. A fabric couch is always your best friend when it comes to protecting your walls. It is easy on walls when compared to wood or rot- iron sofas.

4) Clean your walls regularly:

If your paint is waterproof and washable, gently wiping stains on your wall with a dry cloth first and then a slightly damp cloth is a good idea. Most stains go away easily when wiped this way. Make sure you wipe in gentle circular motions. It is always better to test the washability of the paint before you paint an entire wall(s). Paint a big spot first, let it dry well, make a stain and then wipe it down. If the paint begins to fade or becomes uneven and blotchy, you could look for better paint to colour your walls with. But if this does not sound time-efficient for a quicker painting process, it is better to test your paint behind photographs, wall hangings or paintings that rest against your walls. This will give you a fair idea of how the paint reacts and nobody is going to see if mistakes are made. On a more stubborn stain, use bleaching powder and water to clean with a soft sponge that is not dyed in any vibrant colour.

Remember, wall cleaning must always happen immediately after the stain is made. It should also be gentle and slow.

5) Cover spots with paint:

If the stain refuses to budge or the paint moved too much, you can repaint the spot using the same colour. Make sure the brand and shade are the same and make use of tools employed earlier. This way, spot correction looks flawless. But always keep this step as a last resort and try your best to clean your walls gently with a cloth first.

If your walls are covered with spots and no amount of cleaning works, then its time to redo the paint. With the right choice of wall paints from Jenson and Nicholson Paints, proper prepping and regular cleaning of your home, dirty walls will never be something to worry about!

Every wooden furniture is considered a work of art when it is properly cared for and stored carefully, but unfortunately some finished are subjected to scratches and spills, hence even the highest quality of wood can lose its glow within a period. However, little scratches and stains don’t need any major repairs since they are not that serious and could be fixed with just some little restoration that won’t burn a hole in your pocket. If your wood sees some discolouration from its original wood polish shade, the surface seems sticky, there are visible patches or there are some cracks to the top layer of your furniture, then it is probably time for you to restore your wooden furniture and help extend its life span.

Follow these steps to bring your furniture back to life!

Repair the damage

To avoid any further destruction, the major damage must be repaired. This must be addressed as soon as the damage is seen since the real intensity begins soon after it is ignored. For quick and easy results, a mixture of dish soap and warm water can be used to smoothly clean the surface with either a soaked sponge or a paintbrush. Once the scrubbing has been completed, use fresh water to clean the surface for any residue of soap. After drying the surface, the furniture is then ready for the next step. Sanding can also be used as a measure to even the surface or take out paint stains. This also removes the wood polish that you had previously applied creating a bare surface to be worked on.

Stripping the damaged layer

The stripping is a process also known as removing the old and damaged layer of the wooden furniture with strippers. During application, a thick coat of the material is applied on top of the surface and left to sit perfectly still for a few minutes in order for it to dry. Once the stripper softens and dissolves the top layer of the surface, it is then scraped out using a scraper. There are plenty of industrial machines that do this work, but it can also be done at home at your convenience. Doing it manually also helps pay attention to the small details that most probably would not be caught when used on an industrial machine.

Prepare the furniture

Preparing the furniture is as simple as checking if any further repair is either required or not. This process includes checking for alignment of doors and drawers, fitting of accessories, folding structures, and so on. Making sure everything is in structure and ready to be restored will help fasten the process by a lot.

Finishing

For larger-sized open woods like oak and mahogany, fillers are necessary. The fillers must be matched according to the colour and texture of the furniture to help look more natural. So figuring out what filler works best for your wood is necessary. And finally, the wood polish must be applied to seal the deal. The wood polish helps get into every nook and cranny, fill it up and help the wood regain its shine while helping it last longer.

The easiest way to help your furniture stay shiny and looking elegant is to keep retouching the wood polish and taking care of every minor damage. The damage may look smaller to the naked eye, but if left untreated, it may damage the whole furniture. Even though most restorations might be a little too expensive, it is important to understand that it is more expensive to buy pre-made wooden furniture than restoring the old ones.

Sheenlac Paints

Learning how to take care of your wood is all about understanding what things can put wood at most risk. While most wood types are regarded and tested as durable, this does not mean wood should be treated in a harsh and careless manner. It is even important to understand that many external factors come into play when we discuss taking care of wooden furniture, so here are some things you can look into and help keep your furniture safe.

Natural sunlight

The ultraviolet rays from the sun can ruin the finish of your wooden furniture over time, and the polish is one of the most important things keeping your furniture from chipping and rotting. To avoid this, you can move your furniture away from direct sunlight or at least limit the exposure to sunlight as much as possible. By opting to drape furniture clothing over the wooden furniture or by rotating its placement in your home throughout the year will definitely help the wood polish to stay longer and protect the wooden furniture.

Level of Humidity

Extreme levels of humidity can sometimes cause wood to swell up and warp. Therefore, it is key to maintain a zone in between too much and too little humidity. With very low humidity, it can cause the wood to lose moisture and shrink, while with extreme humidity wood tends to soak up the moisture and swell up. in order to avoid any splitting or cracking of wood over time, ensure that the humidity level stays balanced wherever the furniture is kept.

Liquid spills

It has been passed down from generations that placing a coaster underneath your drinks is absolutely necessary when dealing with a piece of wooden furniture and liquids, and this one has proved to be one of the most helpful suggestions. The thing with liquids is that tend to get soaked up by wood and leave a mark on the surface, which is something you want to avoid even if you are using the best wood polish in town! The water droplets could potentially cause rot and chipping, which is something you do not want for your wooden furniture. Hence it is very important to use coasters or saucers while placing liquids, this can even be substituted by placing a furniture mat and avoid liquid spills.

Now that you’re familiar with the top three enemies of wooden furniture, keep your eyes open and make the necessary arrangements they need. Although most woods are durable and can start strong for a longer period of time, there are some cases where they could appear damaged and would need repairs are done, which could cost you. Keep your furniture safe and your home happy!

To get more information Visit: www.sheenlac.com

Choosing paint colours for the walls in your home can be stressful. If it turns out great, everyone’s happy. If not, you regret the decision and will probably have to put up with it for a while in case you’re not too keen on repainting. Above all, the walls that were meant to make you feel happy and satisfied could upset you and affect your home’s aura.

To help you avoid a disaster situation like this and to get exactly what you bargained for, we have some simple yet smart tips for you to choose the right shade and achieve your home’s dream look!

1) Step away from neutrals:

While simple white, cream, baby blue and pink shades are staples in most Indian houses, they tend to stain quickly and are difficult to maintain. Moreover, for a modern or slightly aesthetic look, they require a lot of decoration and external elements to add the oomph factor. Therefore, looking at different and more trendy shades like bright yellow, turquoise, maroon or lavender could add more character to your home and serve as a statement piece by itself. If you’re looking for something simple, you could opt for single accent walls by painting only one wall with a different colour, for your rooms to look balanced and not too loud.

2) Decide the mood your home should set

Some people prefer for their home to give a sense of calm and relaxation when they return from a tiring day at work. Others like their home to inspire them and help stir the pot of creativity. Therefore, understanding the mood you want your home to set is essential. If you’re looking to wind down and relax, lighter shades like pastel green, lavender or even a brown accent wall can help. The key is to pick colours that are found easily in nature. In fact, it is essential that mood  as well to enhance the look. For a bold and peppy mood, bright colours like brick red or double accent walls with complementary colours like yellow and blue are the way to go!

3) Remember that lighting affects colour

That beautiful greyish green colour you see in a store with bright lighting or on your laptop screen will hardly ever look the same when painted on your wall. Sunlight coming from your windows could make the shade look completely different and so can any standard LED light bulb! It is best to swatch the shade on your wall or ask for your painter’s advice on how a shade will look when exposed to different lighting. It is also best to avoid looking at studio or professional images of homes for inspiration because the actual result may differ a lot from the images.

4) The environment has a role to play

Pink represents life and positivity. The vibe that this colour sends to the people who reside in a pink space is of happiness, joy, life and a feeling of glee. This light-heartedness that pink provides is not a feeling achieved by many! Therefore, if you want one such sensation, then pink is your definite bet.

To Get More Information visit: www.sheenlac.com

Contact Us: 8300030404