#sfx tutorial

( context plan on going to a Halloween party as him )

actually yes!!! i’ve gone through a fair bit of trial and error on this one so let me give you some tips!!

here’s how i did it.

so. first. the makeup.

you will need

- cotton balls/pads

- liquid latex

- scar wax (optional)

- paper towel tube

- tissues

- red base makeup

- eyeliner pencil of some sort

- fake blood

- black/brown/yellow/purple makeup

so, first, you’re going to want to block out the shape of the injury. i usually just draw it out with the eyeliner pencil (using a reference of course). you’re going to want to go all the way down your neck to the collar of your shirt and as far back to where your hair falls on your neck. if your hair doesn’t hit your neck well. then follow your heart. then, you’ll follow the guidelines you’ve put down with cotton and liquid latex to make it raised. you’ll want to tear up the cotton balls/pads and roll them into thin strips with your fingers. you can make them as long or as short as you want. i usually make them pretty short though, so it’s easier to make sure they follow the lines. once you’ve rolled them, you can place liquid latex over your guideline, and then stick the strip on. if that doesn’t make sense, check out my video tutorial and also the one i attached at the end. then, once you have that, you can start adding texture. i usually put one piece of scar wax on the side of my cheek like here. it should look somewhat like this (but with stuff on your neck too.) this is also the stage where i start attaching little pieces of tissue in shreds to my face with liquid latex to simulate the little floppy pieces of skin that hang off.

next, you can add the fake windpipe! for this, i cut a toilet paper tube in half and then adjust the size until it fits comfortably over my throat. you can attach it with liquid latex, then cover it with another piece of tissue to make it a little more seamless and use liquid latex again to hold it down.

now, you have to go in with the color. start with a red base, then add yellow and black highlights, with a little bit of purple if you’re feeling bold. but don’t use too much purple. then, go absolutely insane with the fake blood. the most important thing is to respect the lines you made before, cause in the movie all the wounds are isolated to one side of his face.

to modify this for the later stages of decay you’d want to use a green base for the rest of your face and use less red and more of the darker colors in the wounds. you could create texture on the rest of your face with liquid latex i think to sort of simulate the shriveled look but i’m not super sure - i haven’t tried anything past the initial fresh hospital look. i’d look up a few zombie makeup tutorials and see if you can figure anything else out!

i based all of mine off of this tutorial, so it might be a helpful watch if you’re confused at all.

next, the coat. i really wanted the blood to look fresh, so i had kind of a hard time finding fake blood that would work. most of it dries and soaks into fabric, and since the green coat is dark, it just ends up kinda looking like it’s been stained with an unidentified liquid. so i decided to make my own. i mixed gelatin powder, water, and corn syrup with food coloring - mostly red, but a few drops of blue to get a darker more bloody nasty look. in terms of amount, you just kind of have to follow your heart. then, i poured a little over the shoulder, let it drip, then laid it down and did some spot treatment and made sure the coverage was even and there was enough. i’d recommend doing this maybe two nights before you’re going to need the costume - it takes a while to dry but if you let it dry for too long it’ll start to crack when you move. however, it’s the only way i’ve figured out to keep the blood looking fresh. if you want, you can also cut holes in the coat in some places to match how it is in the movie, but i’ve found it honestly doesn’t need it.

I’ve gotten LOADS of questions about how I made my prosthetic scale thing for Calianna, and this was actually my first homemade prosthetic piece, so I’m by no means a professional, but here’s a walkthrough of what I did. 

If you like my content, consider supporting me here!

Here's how to save and use a Glatzan baldcap's leftover!

Have you ever used a baldcap yet? A Glatzan baldcap, or a latex one?  There are quite a few differences between the two, we may have a favorite one, but they’re both very useful, depending on what we need them for. Today we’re not talking about these differences though, because i would like to focus on a Glatzan baldcap’s “leftovers”.  A Glatzan baldcap (Kryolan here) is available in two sizes…

I recently made a post about how to get into makeup, but in it I only talked about traditional, “pretty” makeup. I didn’t address the creepier side of it at all. I’ve heard a LOT of people say that they think SFX makeup is really interesting and that they would love to start experimenting with it, but they have no idea what products to buy or how to use them. I’ll warn you now -- FX products are not cheap, and some of them can be a little intimidating the first time you use them, but once you get used to working with them, it’s really fun! With this kind of makeup, you can really transform yourself; the only limit is your imagination. I’ve only been into SFX for the last year or so, so I’m still learning and building up experience, but I think I’ve more or less mastered the basics. I feel like this kind of makeup is really more of an art form than traditional makeup, and (as with any other kind of art) you can really see yourself progress as an artist over time.

like with traditional makeup, there’s a few basic products that I recommend starting your collection with:

liquid latex (This is probably the product you’ll use the most in your projects. It’s easy to use, easy to remove, and not too expensive. Latex is most commonly used to create “fake skin” for fake wounds.)

face paint (Unfortunately, I can’t link you to the palette I use, because it came as part of a makeup kit. There are three common formulas: water-activated paints, alcohol-activated paints, and cream paints/grease paints. I recommend starting out with cream paints, because they’re the safest, easiest to use, and most forgiving of the three.)

a bruise wheel (These are special paints with a creamy, easy-to-blend formula, used to create realistic-looking bruises. If you don’t want to buy one, you can get the same effect with a combination of very dark red lipstick and black eyeshadow. I do recommend the bruise wheel though, because the yellow and green colors are really good for making your skin look sick or infected.)

coagulated blood (There are two types of fake blood. This one is the thick, clotted, nauseating kind. It doesn’t smear or run as easily as the more liquid-y blood does, and it adds an extra layer of icky texture to wounds.)

squirt blood/fresh blood/standard fake blood (This stuff looks like fresh blood. Different brands market it under different names, but they’re all the same: runny, deep red, and a complete mess. It’s super fun to work with, but you WILL ruin whatever clothes you’re wearing.)

Those products cover the basics, and it’s a good idea to master them before you move on to less forgiving SFX products. If you need ideas/examples, try one of these tutorials: x x  They’re both pretty easy, so they’re good “first attempt” looks to help you get used to the products.

Here are some other commonly-used FX products that you might run into:

rigid collodion (This is one of the scariest FX products to use, so I definitely DO NOT recommend experimenting with it until you’ve mastered the basics. This product puckers your skin in a way that creates very realistic fake scars, but if you don’t remove it properly, or apply it in the same place several days in a row, or put it on your lips or eyes, you could seriously damage your skin. I HAVE used it before and I was fine, so you don’t need to be afraid of it, but if you’re going to use it, be careful and make sure you know what you’re doing.)   

scar wax (This is literally just modelling wax for your face. I’ve seen it used with rigid collodion or alone to create scars or wounds, and used on its own to make prosthetic noses and brows. I have some, but haven’t used it yet, but my understanding is that it’s very easy to use.)

spirit gum (This is an adhesive, used for gluing prosthetics to your face. I’m pretty sure you need a special removal liquid to get it off, but I haven’t used it yet so I am by no means an expert. On the rare occasion that I do have prosthetics, I just glue them on with a little liquid latex.)

tooth fx (It’s paint for your teeth. You have to make sure your teeth are completely dry before you can put it on, and you have to make sure the paint is dry before you can close your mouth, but it looks really cool. It comes in lots of colors, from black to blood red to nicotine yellow.) 

Honestly, if you’re serious about getting into SFX, I recommend getting a stage makeup kit. It’s the easiest way to get all the basic products at once, and it’s actually cheaper than buying them all individually (like I said, FX products aren’t cheap). I got the Mehron Special FX Kit (which has all of the products I mentioned in this post in it) for my birthday last year, and it’s been a really great introduction. While some of the products aren’t the best quality, they’re good for learning and starting out. As you run out of things, you can replace them with better quality products.

Here are some tips and tricks to remember when you’re working with these new products:

ALWAYS DO AN ALLERGY TEST BEFORE USING A PRODUCT ON YOUR FACE. Testing products is really easy: I just apply them to the back of my non-dominant hand and leave them on for a couple of hours to see if I have a reaction. The only time I’ve used rigid collodion was when I recreated the Outsider’s brand from Dishonored, which doubled as my allergy test for the product. (And it did break me out, so I don’t use collodion anymore.) I really cannot stress how important allergy tests are -- this is definitely a “better safe than sorry” kind of thing. 

YOU CAN’T USE LIQUID LATEX IN PLACES WHERE YOU HAVE HAIR. TRUST ME. IT WILL PULL OUT YOUR BABY HAIRS. PLEASE DO NOT ACCIDENTALLY RIP OUT YOUR EYEBROWS OR BEARDS REMOVING A PROSTHETIC. You can block your eyebrows out to protect them from the latex, but I prefer to just avoid it altogether.

You can use spirit gum near (but not on) your hair, as long as you have the proper removal liquid to get it off. This makes spirit gum the ideal adhesive for attaching things like elf ears, horns, ect.

With the bruise wheel, a little product and a lot of blending goes a long way. 

If you plan to work with latex a lot, I recommend buying a ton of cheap cosmetic wedge sponges to apply it with, because you will ruin every sponge you use for latex after one use.

Like with pretty makeup, I recommend buying a set of professional makeup brushes for this. DO NOT USE YOUR REGULAR BRUSHES FOR FX MAKEUP. YOU WILL RUIN THEM. (The Mehron kit I have came with several brushes, and you could also use normal paintbrushes as long as they’re soft and made from material you aren’t allergic to.)

You can create realistic-looking fake skin by layering liquid latex with very thin strips of tissue paper. Warning: doing this takes forever, because you have to wait for each layer to dry completely before adding the next one.

Don’t worry if your makeup doesn’t end up looking exactly like it did in your head, or exactly like your reference picture. SFX looks are very forgiving, because they don’t have to be neat, or pretty, or symmetrical. In fact, for most horror makeup, messier is better.

Contouring the hollows of your cheeks and your temples with a black or dark grey eyeshadow is a great way to instantly look more sunken in and skeletal (especially if you already have a white or grey foundation on). 

You can make your own foundation shades for whatever monster you’re creating by mixing face paint (or matte eyeshadow pigments) with your normal foundation. Foundation + white face paint = vampire. Foundation + grey (and maybe a tiny bit of green) paint = rotting corpse/zombie. And mixing your own colors is really fun! 

And finally,

Don’t be afraid to try new things, and don’t expect all of your SFX looks to turn out the way you wanted them to, especially at first. No one starts out as an expert. Remember the first time you tried to use liquid eyeliner? Be patient with yourself, and take on new challenges as you master basic skills. 

(via https://www.youtube.com/watch?v=HNO3kFmEEJs)