#screwdriver bits

Screwdriver Bits Sets - Shraddha Impex

The model number of a screwdriver is expressed as the width of the bit * the shank. For example, 2x75mm means the width of the bit is 2mm and the length of the shank is 75mm (not the full length).2022-07-12 13:34:30Dongguan Gewei Electronics

1. The model number of a screwdriver is expressed as the width of the bit * the shank. For example, 2x75mm means the width of the bit is 2mm and the length of the shank is 75mm (not the full length).

2. The model number of a Phillips screwdriver is expressed as the size of the bit * the shank. For example, 2#x75mm, it means that the head is 2 and the metal rod length is 75mm (not full length). Some manufacturers use PH2 to indicate 2#, which is actually the same. You can roughly estimate the size of the cutterhead by the thickness of the shank, although industry is distinguished by the size of the cutterhead. The size of the screwdriver bits are classified according to the size of the head:

Screwdriver bits can be divided into different head types: one word, cross, meter, star (computer), square head, hexagonal head, type head, etc., of which one word and cross is the most commonly used in our life, like installation, maintenance of such are used, it can be said that as long as there are screws where we need to use the screwdriver. The hexagonal head is not used much, commonly used hexagonal spanner, like some machines on many screws with hexagonal holes. It is convenient to use the force at multiple angles. Star-shaped large see also, not much, small star-shaped commonly used dry dismantling mobile phones, hard drives, notebooks, etc., we call the small screwdriver clock batch, commonly used house type T6, T8, cross PHO, PHOO such. The head says: a word SLOTTED cross PHILLIPS rice word POZI star type TORX square head SQUARE hexagonal HEXGONAL

Where the bolded letters are followed by numbers to indicate the slot number. For example: Cross, PH1PH2PH3 The above models are available as standard as well as gauges for testing.

The common specifications of the star type are: T5T6T7T8T8T9T10T15T20T25T27T30T40T45T50

Common specifications for crosses: PHOOOPH0OPHOPH1PH2PH3, the more forward the smaller.

Description of the specifications of the screwdriver: expressed as head type * length, for example, a word 6 * 100, 6 is the head type of the rod is also the diameter of the rod, 100 is the length of the rod (length does not include the handle part), cross PH2X100, PH2 is the head type, 100 is the length of the rod. Unit: mm. Cross screwdrivers are generally available in 7 sizes from small to large ph000ph00ph0ph1ph2ph3ph4.

Approximate relationship between screwdriver rod diameter and specification.

4mm ~ 4.5mm rod generally do cross Ph1, can cover ph000ph00phOph1.

This series is basically a precision series, disassembling small electronic devices, glasses, watches, radios, tape recorders and the like... A must! This is mainly a set, which ph000 is very small, not many months with a 6mm rod is generally used for cross Ph2 specifications, this is the most commonly used in medium-sized screwdrivers a specification, so you can buy a separate, used for monitors, radios, televisions and other housing fastening screws, transformers fixed, etc., woodworking electric batch to do furniture door screws is also a Ph2 head to fight the world. 8mm rod For Ph3, 10mm rod for Ph4, basic mechanical equipment may be used, electronic assembly with the possibility of very little, unless it is to do Shen box controller ...

Screwdriver Bits Company with Top Expertise

Meeng Gang Enterprise is a company established in 1972 that’s dedicated to manufacturing products such as power screwdriver bits, ratchet screwdriver and all of its relating products. With more than 42 years of experience in the industry, our tools have been sold worldwide and have a respectable reputation in the industry.

The newly released power screwdriver bitskit, consisted of 25 pieces of…

The Micaton Magnetic Screw Driver will hold your screws straight and true

If you’ve ever had to do any home building projects, then you have undoubtedly used a screwdriver. Some of the things you’ve likely done with said tool is strip the screws, ruin the wood, and drop the screw before it takes a grip into the surface you’re affixing it into, thereby letting you jam the screwdriver into what was previously a spotlessly clean surface, with nothing to show for it. If…

Rasian A. wins $50 to spend at KC Tool

Each month we give a $50 KC Tool gift certificate to one of our customers who left a product review in that month. The gift certificate is applied to the customer’s account so they can use it next time they make a purchase from KC Tool.

Strings? What strings? There are no strings attached. This is just a good old fashioned giveaway to thank those of you who leave reviews about the tools you buy…