#runningtoilets

From leaky pipes to clogged drains, a plumbing problem can be a major headache for any homeowner. Imagine that your friends visit your home and use the washroom with a leaking tap and clogged drain. They might feel discomfort, leaving you embarrassed, right? That is why fixing common plumbing problems as soon as possible is essential. 

But to fix them you need to know the most common plumbing issues. So, let us talk about the most common plumbing problems that we face in our everyday lives. 

The Most Common Plumbing Problems  

There are numerous plumbing issues that can arise in a home. These issues can range from a clogged toilet to water heater problems. The most common plumbing issues include:   

Leaky Pipes    The problem of leaky pipes may persist for many days   The main reason for the leaky pipes might be many different things, but it is important to fix them as soon as possible because they can lead to other problems.   

Clogged Drains    When hair or food particles get accumulated in the drain over time, the result is clogged drains. and are cleaned only by removing them manually. Though there are many drain-unblocking chemicals available in the market, the best way to solve the problem of clogged drains is by hiring a professional plumber who will unclog the drain manually. 

Running Toilets    This problem is a common thing that most of us face at home, and it might occur because of increased usage of the bathroom or a disruption in the pipe line that is connected to the flush. The problem seems to be more severe when there are guests at home.   

Water Heater Problems    Water heater problems could be due to a number of potential causes, from a faulty pressure regulator valve or filter, to an old water which mostly include the complications like hard water and pipe corrosion.    A continuous tank leak, an inefficient water supply, time disruptions in heating the water, and internal pipe failure are all possible causes of low water pressure that lead to water heater problems. It is critical to address this issue as soon as possible. 

Final Words  

If you try to fix these plumbing issues using natural processes or a few handy chemicals, the problems will not be completely resolved, and are likely to reoccur.  Therefore, it is best to contact a good plumbing service provider like JC Enriquez. 

We have been in this business since 1968 and have licenced team members who are available to serve you around the clock.  We provide all types of plumbing services and have solutions for all your tankless water heater problems. Reach out to us today to schedule your appointment. 

Running toilets is one of the most common home problems that has ever existed. Toilets are used every day worldwide and they will continue to be used for the next century quite possibly.  When a toilet is flushed, the droppings are flowed into a septic tank or to a sewage treatment plant. But, sometimes during this process, the flapper over time can become hard and crispy or sediment will start to form and this will make it hard for the flapper to seal. This allows for water to drip from the tank into the bowl. There are other reasons that causes a toilet to run like mineral deposits, broken fill valve, and improper water levels. This can be very annoying and can become costly if you’re hiring a plumber. If you’re determined to fix your own toilet, listen up because we’ll give you guys a few steps to fix these problems the EASIEST WAY!

Step 1- Locate the Damn Leak - The common felon in this situation are usually malfunctioning flappers, mineral deposits, cracked fill valves, and water level problems

Step 2- So if you got a messed up flapper there is a way you can fix this problem. The water in your tank is help by a rubber component called a flapper. This component can get cracks over time . and they will no longer form a tight seal. The flapper is connected to the flush handle with a chain. Sometimes, the chain gets tangled and catches on other mechanisms. If this is the case, you can replace the chain or use a piece of string with the same length. There is a hinge where the flapper connects to the bottom of your toilet’s holding tank. Sometimes, an edge of the flapper will get caught in the hinge. Move the flapper up and down to see if anything sticks. If your flapper sits on the tank drain crookedly, it will not seal correctly. Adjust the flapper so it sits right over the drain hole.

Step 3- Improper water levels- When you are troubleshooting to find how to fix a running toilet, always check the water level in your holding tank. It is regulated by an ingenious mechanism that depends on buoyancy. After a flush when the tank refills with water, a hollow rubber bulb floats with the rising water. When the tank is at the proper level, the float automatically turns off the water intake. If you have this problem, you may need to adjust the float: Be sure that your water level is about an inch below the toilet’s overflow tube. If you have an older model toilet with the rubber ball, loosen the screw at the end of the float arm and adjust the float where it should be. Newer toilets have floater cups instead of a rubber ball. Adjust the height by the screws toward the top of the fill valve.The lower you adjust your float, the lower the water level will be in your tank, and the less water you will have per flush. The low flush toilets can save you money, but this can be a problem with other models. Check your float to make sure it is not filled with water. This condition could cause it to sink lower and keep your water valve from closing properly. Unscrew the float and shake it to see if you hear water. If the float is water-logged, then you must replace it.

Step 4- Mineral Deposits- Usually the water inside of homes have minerals like calcium like lime and water.Over time, hard water can create mineral deposits on your toilet’s mechanisms. The result is faulty seals and possible jams. If you suspect mineral deposits, try this method: Take the cover off the holding tank and look for any crusty mineral buildup inside the tank or on the mechanisms.If this is a problem, the whole flushing unit may need cleaned—which is a difficult job. In this case, it is best to contact a plumber.

Step 5- Broken Fill Valve: The water that flows to your toilet tank is controlled by a fill valve. If this valve breaks, water will continue to flow. As a result, the refill cycle will be ceaseless. A tell-tale sign of a broken fill valve is when you notice that it is submerged in the tank. Try this solution: Shut off the toilet’s water supply hose and remove the lid from the tank. Put a small bucket below the water supply hose to catch any water and flush the toilet to empty the tank.At the bottom of the tank, you will find a lock nut that goes to the water supply shank. Unscrew it and take out the whole valve assembly. Any water drainage will go into the empty bucket.Install the new valve the height it should be in the tank. This is usually about an inch below the top edge. The threaded end of the valve goes into the hole in the tank base. You will have to tighten the lock nut by hand. Turn it gently with a pair of pliers to seal it tight. Do not over tighten it as the fixture can crack.

Conclusion: