For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosettes and Our Original Handmade wood adaptors. * A very Affordable Way to Install Antique Door Knobs for Modern Pre-Drilled Doors * Includes 2-1/2 -inch Rosettes and 2 of Our Original Wood Adapters * See Photo on How to Use Wood Adaptors. Latch and Spindle are for Example Only. * See Photo for the Kind of Knobs that Fit this Rosette If you have the antique knobs (or replicas), spindle and latch, this retrofit kit has all the hardware needed to install in your modern pre-drilled doors, stamped brass 2-1/2" rosettes, hand made wood adapters and matching screws to Retrofit Modern Pre-drilled Doors and Threaded Spindle. Installation Instructions will be included, although they are very simple. (1) Install your Latch, (2) Glue wood adapters with hot glue gun, (3) Secure door plates by tightening your Knobs, (4) Drill pilot holes and fasten door plates with the wood screw, (5) Then Adjust the door knobs and Bolt securely to the square side of the spindle. TOOLS NEEDED TO INSTALL THIS SET:, one 3/16" slotted screwdriver and one Phillips head screwdriver. One hot glue gun (wood glue if glue gun is not available) power drill to drill a pilot hole in the wood adapters. Guaranteed to your satisfaction with Three Generations of experience. A great value for homeowners to install as they are a little more labor-intense to install than our Premium sets. Over the years, we have made many improvements to assure that our products are superior cosmetically and enhanced engineering for easy installation with reduced future maintenance. To See My Entire Etsy Site Go to: https://www.etsy.com/shop/RoussoDesigns 1900W 2-1/2in-Rosette

For just $29.95 Your Antique Knobs, Tubular Latch, and Spindle. This is the Retrofit kit You need for Modern Pre-drilled Doors 1 Pair of our 2-1/2" Rosettes and Our Original Handmade wood adaptors. * A very Affordable Way to Install Antique Door Knobs for Modern Pre-Drilled Doors * Includes 2-1/2 -inch Rosettes and 2 of Our Original Wood Adapters * See Photo on How to Use Wood Adaptors. Latch and Spindle are for Example Only. * See Photo for the Kind of Knobs that Fit this Rosette If you have the antique knobs (or replicas), spindle and latch, this retrofit kit has all the hardware needed to install in your modern pre-drilled doors, stamped brass 2-1/2" rosettes, hand made wood adapters and matching screws to Retrofit Modern Pre-drilled Doors and Threaded Spindle. Installation Instructions will be included, although they are very simple. (1) Install your Latch, (2) Glue wood adapters with hot glue gun, (3) Secure door plates by tightening your Knobs, (4) Drill pilot holes and fasten door plates with the wood screw, (5) Then Adjust the door knobs and Bolt securely to the square side of the spindle. TOOLS NEEDED TO INSTALL THIS SET:, one 3/16" slotted screwdriver and one Phillips head screwdriver. One hot glue gun (wood glue if glue gun is not available) power drill to drill a pilot hole in the wood adapters. Guaranteed to your satisfaction with Three Generations of experience. A great value for homeowners to install as they are a little more labor-intense to install than our Premium sets. Over the years, we have made many improvements to assure that our products are superior cosmetically and enhanced engineering for easy installation with reduced future maintenance. To See My Entire Etsy Site Go to: https://www.etsy.com/shop/RoussoDesigns 1900W 2-1/2in-Rosette