#rgbmodule

Colorful Led Module RGB for STEM Education Key Specification of this LED Module: - Operating Voltage: 3.3V - 5.5V - Interface Type: 2.54mm Pin Header - Mounting Method: Screw Fixation - Mounting Hole Parameters: Hole Diameter 3.2mm, Hole Spacing 10mm - Module Dimensions: 49mm * 44mm * 40mm - Signal Type: Digital Signal - Trigger Condition: Digital signal input The LED Module Interface Description: GND connects to the power negative terminal. Pin R (RGB) serves as signal input to control the color and series quantity of RGB LED beads. D (DOUT) is the signal output port for cascading the next LED bead. They can be used with arduino, esp32, stm32 control boards. If you interested with more other electronic components, they are available to get quotation.   About Order Quantity to this RGB module This rgb led module wholesale MOQ is 100pcs, if you are regular importer, there is no strict MOQ requirments, our catalog contains more than 1000 stocks. Welcome contact us to get a quotation. Read the full article

RGB LED Module Project STEM This RGB LED Module designed with 2.54MM Pin header. To use with Dupont cable is advised. This RGB Module is very suitable to program by Arduino, STM32, ESP32, Raspberry Pi etc. Specification of the RGB Module Working Voltage: 3.3V-5.5V Connector: 2.54mm pin header Mounting Method: Screw-on Mounting Hole Specifications: 3mm diameter, 10mm pitch Module Dimensions: 36mm*31mm*18mm Signal Type: Digital Trigger Condition: A high level input on the RGB pin lights up the LED; a low level turns off the LED. Connector Description: GND connects to the negative terminal of the power supply, R connects to the red control signal pin, G connects to the green control signal pin, and B connects to the blue control signal pin. About LED Introduction LED stands for light-emitting diode and is made from a mixture of compounds: gallium (Ga), arsenic (As), and phosphorus (P). Gallium phosphide diodes emit red light, gallium phosphide diodes emit green light, and silicon carbide diodes emit yellow light. The reverse breakdown voltage of an LED is 5V. Because its positive volt-ampere characteristic curve is too steep, the module includes an onboard current-limiting resistor to control the current flowing through the tube during use. RGB, which stands for red, green, and blue channels, is an industry color standard. RGB displays a variety of new colors by varying and superimposing these three channels. According to statistics, 16,777,216 different colors can be created. What's the MOQ? Usually, Minimum Order Quantity is 100pcs per model. However it is negotiable if you are also looking for other related parts list. Welcome chat with us via whatsapp or post us message here. Read the full article