Stay connected and enjoy easier printing with the mobile printing feature of the HP Tango X  printer. You can control the printer with your voice. Connect the printer to wireless using various compatible apps such as the HP Smart App, HP Wireless Direct, AirPrint, Print Anywhere. HP Smart app is widely used to enjoy mobile printing. Also, make sure that the app supports only the Windows 10 operating system.

How to Setup Mobile Printing for HP Tango X Printer?

Use the HP Print Anywhere feature on your HP Smart App to enjoy the benefits of high-definition printing. Go through the step-by-step instructions given below to print using the Tango X printer.

Download and install the HP Smart App on your mobile device.

Open the HP Smart App. Select your Tango X printer name from the list displayed on-screen.

Make sure that the Print Anywhere option is displayed on the screen.

To activate the feature, ensure that the printer and the mobile device is connected to the same network.

Tap the printer name on the home screen of the printer.

Double-click the Advanced Settings -> Web Services options -> Print anywhere. Print a test page to confirm whether check if the setup is successful.

How to Print With AirPrint On HP Tango X Printer?

To set up and print using the AirPrint app is interesting. Use the guidelines listed below to connect the printer to the network.

Check if the printer supports the Apple version.

Ensure that the HP Tango X printer setup supports AirPrint setup.

Connect your Tango X printer and the Apple device to the same network.

Long-press the Wireless button on the printer for 3 seconds to establish the network connection.

The ink cartridge is necessary to print from the HP Tango printer. Use the Instant Ink feature to enroll the printer name on the list of available devices. If the ink cartridge runs out of ink, get a new one delivered at your doorstep.

How do I Replace Ink Cartridge on HP Tango?

Turn on the printer by gently pressing the Power button.

Raise the printer lid and insert plain sheets of paper into the input tray.

Ensure that the output tray is extended.

Press the Ink door button to release the ink cartridge access door.

Raise the door until it fixes into place. Refrain from proceeding until the carriage is idle.

Raise the latch to remove the ink cartridge out of the printer.

Take the new ink cartridge from the package and insert it into the slot.

After a while, the printer print an alignment page.

How To Refill Ink In HP Tango Cartridge?

Refilling the ink cartridge is a messy job.

Open the ink door and take the ink cartridge out of the slot.

Tear the tape on top of the cartridge.

Inject ink into the cartridge using a syringe.

Do not overfill the ink cartridge as it may lead to the creation of air bubbles.

Air bubbles may block the movement of the nozzles and the print-head.

After refilling it, cover the holes using tape.

Clean the excess ink by making use of a damp cloth.

Step 1: Use of Color Ink or Print a Photograph in Gray-scale

Tap on the print in your software app.

From the list of printers choose your ojpro6978 printer.

Tap on the option that opens the Printer Properties dialog box.

Depending on your software, tap on the paper/Quality or features tab.

To use only black ink cartridge, alter one of the settings below.

Tap Advanced and click Print in Gray-scale, and then choose Black Ink Only.

Tap on Black & White button.

Tap on OK, and then choose Print to start the print job.

The printer prints in black HP Officejet Pro 6978 ink for this print job only.

Step 2: To Print only Black for all your Print Jobs

Select windows for devices and set up 6978 printers.

Right-click your printer, and from the drop-down list choose Printing Preferences.

Choose your Officejet Pro 6978 all in one printer again, and then select the Paper/Quality or Features tab, liable to your software.

STEP 1: PREPARE FOR THE NETWORK CONNECTION

Before downloading the driver, ensure you have an operative network router and an Ethernet cable to follow Quick HP Officejet Pro 8730 Setup Guide.

Ensure you have a network router, switch, or hub with functional Ethernet ports.

Ensure your computer is linked to the router, switch, or hub if it is not already linked.

Use an Ethernet cable. Don’t use a standard telephone cable.

STEP 2: LINK THE PRINTER TO THE NETWORK

Connect the Ethernet cable to the printer and to the router, switch, or hub so that the printer is found during the installation.

Switch on your HP Officejet Pro 8730 Printer Setup.

Eliminate any plug or protective cover from the Ethernet port on the back of the printer.

Link the Ethernet cable to the printer port, and then join the other end of the cable to an access port on the network router, switch, or hub.

STEP 3: DOWNLOAD THE REQUIRED  SOFTWARE FOR WINDOWS

Download the HP Officejet Pro 8730 Setup driver to finish the network printer setup.

Go to our website, type your printer model, and then track the onscreen Quick HP Officejet Pro 8730 Setup Guide instructions to install your HP Officejet Pro 8730 Driver. Liable to your printer model, the guided driver installation app HP Easy Start might install.

If a driver or HP Easy Start downloads, track the on-screen instructions to expose the download file to begin the setup. When provoked to choose a linking type, Choose Wired Network. You need not finish the enduring steps in this section if the setup is positive.

If the download fails or your printer is not recorded on our website, go with these steps to download the HP Officejet Pro 8730 driver from our website.

Go to our website, type your printer model and then check if the operating system version designated is true.

Under Driver-Product Installation Software, select Download next to the full feature driver, and then track the on-screen instructions to use the shown HP Download and Install Assistant, or choose Download only to save and then run the HP Officejet Pro 8730 driver file from your computer.

When interrupted by the installer to select a printer connection option, choose Wired Network to go with and finish the setup.

Attempt to print, scan, or fax, liable to your HP Officejet Pro 8730 Printer Setup functionality.

STEP 4 : DOWNLOAD THE REQUIRED SOFTWARE FOR MAC

When impelled by the installer, click Add Printer to generate a print queue on the Mac.

The Add window exhibits. Choose the name of your printer, select the Use or Print Using menu, click the name of your Quick HP Officejet Pro 8730 Setup Guide in the pop-up menu, and then select Add.

Print photos from the Windows system, by employing the precise paper type and print job settings.

STEP 1: PHOTO PAPER IS LOADED INTO THE MAIN FEEDER TRAY

The paper is inserted into the main feeder tray. Load the paper into the correct tray by noticing your paper type and location of the tray for the paper you are going to use.

All other sheets are taken out from feeder tray.

Fit the short edge of the photo paper into the tray based on your HP Officejet Pro 8720 Setup type.

The paper width guides are adjusted so rest against the edges of the paper.

STEP 2: PRINTING THE REQUIRED PHOTO

The print window and document properties are accessed to arrange your Officejet Pro 8720 wireless all in one printer for the print job.

Edit the photo to improve the colors, brightness, contrast and any other settings before printing.

Do a right-click on the photo that you need to print, choose Open with, and then tap Windows Photo Viewer or Paint.

Pick Print, or select File or the menu symbol, and then tap Print. The Print or Print Pictures screen prompts with normal print job settings.

The OJP8720 printer Document Properties window pane gets opened to access layout, quality, and color and advanced print settings.

The Print Pictures window opens in Windows Photo Viewer, tap Options, and then tap Printer properties in the print settings window pane.

Under Print window in Paint, choose the how to Setup Officejet Pro 8720 Preferences.

Make use of the prompts to diagnose and use print job settings for images in the Document Properties window.

Tap Ok, and then choose Print.

STEP 1: PLACE THE ACTUAL DOCUMENT OR PICTURE

Copy using the Automatic Document Feeder (ADF) by placing the original media on the ADF tray or above the HP Officejet Pro 8710 scanner software glass. This copier based printer is capable of producing a dual-sided copy.

Turn on your HP OJPRO8710 printer.

You can make use of two methods to copy your document or image:

ADF: Keep the item that you wish to copy on the Document Feeder tray letting the print side face upward and the top edge is inserted into the tray initially. Align the width guides for the media to fit in and the control panel shows a message that the original document is loaded.

Scanner glass: The document should be placed on the scanner glass in the same way it is placed on the ADF. Ensure that the document is placed appropriately within the carved guides nearby the glass, and then bring down the scanner lid.

STEP 2: PHOTOCOPY THE MEDIA THAT YOU WANT TO COPY

Tap Copy from the Home screen on the control panel of the printer.

Choose the Document, ID card, or Photo that you wish to copy.

Skim through the number of copies or tap the keypad, and then provide the number of copies required.

Choose the tray and paper size on the Tray Selection.

If you wish to make a single-side copy, select 1-or-2-sided copying and for dual-sided it’s 2-2 sided copying.

Tap Preview and then touch the previewed image to edit. It is easier to crop, resize and align the contrast of the copy from the Edit screen.

Tap Done to go back to the Copy screen.

To customize your desired copy settings, tap the Settings icon and change the copy metrics mentioned below.

Tap Lighter/Darker, slip the button to set the darkness/brightness level, and then Tap Done.

Tap Quality to choose the desired quality level of the output.

Selecting the Draft mode produces a quick copy with less ink consumption. If you choose Normal, it gives a standard copy quality and Best produces a copy with clarity in terms of information in the document.

To enlarge the copy, touch Resize and key in the value as you require, and then choose Done.

Tap Enhancements to choose the settings of print or photo.

To obtain an output with the margin shifted to the left end of the page, tap Binding Margin, and then tap On.

Choose Save Current Settings to hold back the advanced settings once the copy job is completed, and then tap Save.

To get back to the Copy screen, tap on the Back option.