#printerrepairguide

Introduction

If your brother printer not printing black properly, you are not alone. This is one of the most common issues Brother users face—whether the print is faded, patchy, or the printer completely refuses to print black. And the problem becomes even more confusing when the device shows full ink levels but still gives light or missing black text.

In this guide, I’ll walk you through simple, practical, and reliable fixes based on real-world user issues such as brother printer black ink not printing, brother printer new ink cartridge not working, and cases where the printer keeps saying replace drum even after installing a new one. The goal is to help you diagnose the issue smoothly without complicated jargon.

Why Your Brother Printer Stops Printing Black

Before jumping into solutions, it's useful to understand the common causes:

Clogged printhead due to dried ink

Air bubble blockage in the ink tube

Faulty or low-quality black ink cartridge

Incorrect ink placement

Printer not detecting ink volume

Dirty corona wire or drum issue

Wrong paper settings

Firmware not recognizing new cartridges

Many users panic when their brother printer printing very light black text, but in most cases, the fix is quick and inexpensive.

What to Look For

Here are the first things you should examine when your brother printer not printing black properly:

1. Check Ink Levels (Even If the Display Seems Wrong)

Sometimes brother printer cannot detect ink volume, even when the cartridge is full. You can manually check:

Open Menu → Ink → Ink Volume

If incorrect, remove the cartridge and reinstall it

Shake the black cartridge gently and reposition

If your printer does not show accurate levels, learn how to check ink level in brother printer using the manual ink volume status—this often solves detection glitches.

2. Inspect Your Black Ink Cartridge

A surprising number of people get a message like brother printer new ink cartridge not working because:

The protective sticker wasn’t removed

The cartridge is not fully clicked inside

The cartridge is a non-original version not recognized by firmware

A new but dried-out ink cartridge was used

Always make sure your brother printer ink cartridges are genuine or at least high-quality compatibles.

3. Run a Print Quality Check & Cleaning

This is the most important step. Navigate to:

Menu → Ink → Test Print → Print Quality

Look for missing squares or faded lines. If issues appear:

Run Cleaning → Black (Repeat 2–3 times, but do not overdo it to avoid ink waste.)

If repeated cleaning doesn’t fix the brother printer not printing black properly, move to deeper troubleshooting.

For a complete troubleshooting guide with screenshots, check this helpful resource: 👉 Full guide to fix Brother printer not printing black properly

Benefits of Fixing This Issue Properly

Solving your black print issue the right way gives you:

Clear and readable documents

Long life for your printhead

No more faded or very light black text

Savings on ink and maintenance

Reduced downtime when printing important documents

A properly maintained Brother device lasts far longer than most people expect.

Deep Troubleshooting Steps

1. Clean the Printhead Manually

If your brother printer black ink not printing even after auto-cleaning, the printhead is likely severely clogged.

Manual cleaning steps:

Remove the black cartridge

Place a tissue under the printhead

Use a syringe with warm distilled water

Push water gently through the nozzles

Reassemble and run cleaning again

This method restores printing in 80% of severe clog cases.

2. Fix “Replace Drum” Warning

Sometimes, when brother printer keeps saying replace drum, the printer goes into error mode and printing becomes faint.

Reset the drum:

Open front cover

Press and hold “OK”

Select Drum → Reset

Close cover

Now check if your black print improves.

3. Use Correct Paper Settings

Wrong settings can create the illusion of brother printer printing very light black text.

Set the paper type to:

Plain Paper

Normal Print Mode

Do not use “Ink Save Mode”—it makes black extremely light.

4. Run Firmware Update

Old firmware can cause:

brother printer new ink cartridge not working

Incorrect ink detection

Light or missing black prints

Go to Brother Support → Enter Model → Downloads → Firmware.

5. Allow the Printer to Rest

If you recently replaced ink, give the printer 10–15 minutes. This helps air pressure normalize inside the cartridge channel.

What to Avoid

Do not shake the printer aggressively

Do not use extremely cheap third-party cartridges

Do not over-clean (more than 4–5 times in one session)

Do not leave your printer unused for weeks

Inkjet printers need at least 1 page printed every few days.

FAQs

1. Why is my Brother printer not printing black clearly?

Because of dried printhead nozzles, low ink flow, or incorrect paper settings. Clean the printhead and check cartridge placement.

2. What if my Brother printer cannot detect ink volume?

Reinstall the cartridge, clean the contacts, and restart the device. Sometimes firmware updates fix this detection issue.

3. Why is my Brother printer printing very light black text?

Your printer may be in Ink Save Mode, or the black ink flow is partially blocked. Disable ink-saving features and run a cleaning cycle.

4. How do I fix a Brother printer new ink cartridge not working?

Remove the tab sticker, clean the sensor area, insert the cartridge firmly until it clicks, and reset the printer.

5. How do I check ink level in Brother printer?

Go to Menu → Ink → Ink Volume. For inaccurate readings, rely on manual checking or reinstall the cartridge.

Call to Action

If your brother printer not printing black properly even after these steps, it’s time to get expert help. Visit Technofy for professional troubleshooting, printer repairs, and guides that make printing stress-free.

E-Mail:  [email protected]