In a Brocade environment the "switchshow" is one of the most used commands out there. It provides a quick overview of what the state of the switch is, switch name, switch attributes and a list of all ports and states. It had however its limitations which, with later codelevels, can be corrected. As an example. Sydney_ILAB_X6_43_TEST:FID43:admin> switchshow switchName: Sydney_ILAB_X6_43_TEST switchType: 165.0 switchState: Online switchMode: Native switchRole: Subordinate switchDomain: 1 switchId: fffc01 switchWwn: 10:00:c4:f5:7c:66:ac:54 zoning: ON (ILAB_TEST) switchBeacon: OFF FC Router: OFF Fabric Name: Generic Test Network HIF Mode: OFF Allow XISL Use: ON LS Attributes: Index Slot Port Address Media Speed State Proto ============================================================ 66 4 2 01ef40 id N8 Online FC F-Port 50:06:0e:80:10:13:b5:b8 67 4 3 01ef00 id N32 No_Light FC 68 4 4 01eec0 id N32 No_Light FC 69 4 5 01ee80 id N32 No_Light FC 70 4 6 01ee40 id N8 Online FC F-Port 50:06:0e:80:07:c3:70:00 72 4 8 010200 id N8 Online FC F-Port 1 N Port + 4 NPIV public What is bit annoying is that you need to manually keep a list of WWN's and it's associated equipment i.e. what is connected where? That is a tedious piece of labour which is very error prone and, if not kept up-to-date, very dangerous. I've come across a fair few cases where SAN changes where executed based on information in spreadsheets that were plainly incorrect.

Portname

FOS has had the option to configure a name or other string to a port where you could specify whatever you wanted associated to that port. This help in management simplification so that a list of ports and it's associated names can be set. You can argue that you can use the aliases in the zoning database for that but these do not show up in overviews other than zoning related. portname -n "server1_hba2" The issue is that this is also manual action and in in essence no better than a spreadsheet. The only benefit is that this can than be extracted by management software so that when you make a changed it is automatically picked up there. The management software can then be used to create reports or updated lists of this serving whatever purpose you like. In FOS 7.4 the portname could be dynamically filled. For this you have to set the "Dynamic Portname Boolean no yes/no" setting to "yes" via the configure command. (Be aware this is only available when the switch is disabled.

Dynamics

As of FOS 8.1 the command "portname" has been extended so that the display of these fields can be adjusted. It can show the following: S - Switchname T - Port Type I - Port Index C - slot number/port number A - Aliasname F - FDMI hostname R - Remote switchname These can be set via the "-d" parameter with any of the above characters. To me the most useful are the FDMI hostname as well as the Alias name. The others are fairly superfluous as these are already displayed in the switchshow output. portname -d "A.F" That results in output like: Sydney_ILAB_X6_43_TEST:FID43:admin> portname port 84: VSPG700_UNI_Port_2F. port 85: VSPG1500_EXT_Port_1D. port 86: VSPG1500_TGT_Port_2A. port 92: EVL_LIN_HBA0_P1.centos8 port 93: EVL_LIN_HBA0_P0.centos8 So in this case everything after the "." is the FDMI hostname information and before the "." is the alias name as configured with the "alicreate" command. Pretty cool hey. It becomes even more useful when this is now combined with the switchshow output. As of FOS 8.1 the "switchshow" command can be appended with the "-portname" parameter. This then gives you the following: 85 4 21 20:55:c4:f5:7c:66:ac:54 VSPG1500_EXT_Port_1D. 86 4 22 20:56:c4:f5:7c:66:ac:54 VSPG1500_TGT_Port_2A. 92 4 28 20:5c:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P1.centos8 93 4 29 20:5d:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P0.centos8 As you can see this is now a very handy overview which doesn't cost you any effort. The dynamics come even more in play when thing change on a host side where you have no control over. Is a hostname changes this is propagated into FDMI which then results in the portname being dynamically populated with the new name. Sydney_ILAB_X6_43_TEST:FID43:admin> switchshow -portname switchName: Sydney_ILAB_X6_43_TEST 92 4 28 20:5c:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P1.centos8 93 4 29 20:5d:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P0.centos8 New hostname: # hostname linux12345 Sydney_ILAB_X6_43_TEST:FID43:admin> switchshow -portname switchName: Sydney_ILAB_X6_43_TEST 92 4 28 20:5c:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P1.linux12345 93 4 29 20:5d:c4:f5:7c:66:ac:54 EVL_LIN_HBA0_P0.linux12345

!!! IMPORTANT !!!