The Plastic Injection Molding Basics
The plastic injection molding process begins with generating the product design, followed by tooling a mold to fit the product design, melting the plastic resin pellets, and injecting the molten pellets into the mold using pressure.
Steps
Designing the Product
Designers build a part using fundamental design rules related to the injection molding method.
Create a Tooling Mold to Fit the Product Design
Highly trained machinists and toolmakers use the product design to create a tooling mold for the injection molding machine. A tooling mold, also known as a tool, is the heart and soul of an injection molding machine. They are meticulously built to house the negative cavity for the product design as well as extra features including sprues, runners, gates, vents, ejector systems, cooling channels, and moving components. Tooling molds are constructed from steel and aluminum grades that can survive tens of thousands of heating and cooling cycles. Mold manufacturing can take up to 20 weeks to complete, including fabrication and approval, making it the most time-consuming phase of injection molding. It is also the most expensive component of Plastic Injection Process, and once created, a tooling mold cannot be significantly altered without incurring additional expenditures.
Melt the plastic resin pellets
After obtaining the final mold, operators place it into the injection molding machine, which shuts and begins the injection molding cycle. Plastic pellets are put into both the hopper and the barrel. The reciprocating screw is dragged back, allowing materials to pass through the area between the screw and the barrel. The screw then plunges forward, pushing the material deeper down the barrel and closer to the heater bands, where it melts into molten plastic. The melting temperature is maintained at the material requirements so that no deterioration happens in the barrel or the mold itself.
Using pressure to feed the molten pellets into the mould
The reciprocating screw pushes the molten plastic through the nozzle, which is in a depression in the mold called a mold sprue bushing. The moving platen pressure compresses the mold and nozzle firmly, preventing any plastic from escaping. This Plastic Injection technique pressurizes the melted plastic, allowing it to enter all sections of the mold cavity while displacing cavity air through the mold vents.
