#pinksalttiles

Building a salt wall in a sauna using natural khewra salt mine bricks

If you've ever stepped into a sauna with a glowing, amber-lit salt wall behind the bench, you know why people ask for one. It's warm, it's textured, and it looks like nothing else you can build with wood or tile alone. Building a salt wall with Himalayan salt bricks for a sauna isn't hard, but it's not quite the same as tiling a bathroom either. Salt behaves differently than ceramic or stone, and a sauna's heat and humidity add a few extra rules you need to follow.

We ship Himalayan salt brick and salt tile kits across the US and Canada, and sauna walls are one of the most common projects our customers build with them — everything from a single home sauna to a full commercial spa room. This guide walks through exactly how to plan, prep, and install pink salt bricks for a sauna wall, step by step, plus what it actually costs and what most people get wrong the first time.

Why Salt Bricks Work So Well in a Sauna

Himalayan salt bricks bring something wood and stone can't. Each brick is cut from natural rock salt, so no two look exactly alike. Color ranges from a soft blush pink to a deeper terracotta orange, depending on the trace minerals in that particular piece of stone.

That natural variation is the whole point. Backlit with a warm LED strip, a salt wall gives off a soft amber glow that turns a plain sauna into something closer to a boutique spa. It pairs well with cedar, aspen, or basswood interiors, and it doesn't compete with the wood tones the way a bright tile or painted wall would.

Our bricks are sourced from the Khewra Salt Mine in Punjab, Pakistan — one of the oldest and largest salt deposits in the world, with a mineral history that goes back roughly 250 million years. That sourcing detail matters more than you'd think. Spa and wellness clients ask where the material comes from, and "quarried, not manufactured" is a real answer, not a marketing line.

Dry Sauna, Infrared, or Steam? Pick the Right Fit First

Before you buy a single brick, figure out what kind of sauna you're building for. This is the step most guides skip, and it's the one that saves you the most money down the road.

Salt walls do best in dry heat. Traditional Finnish saunas (roughly 150°F to 195°F) and infrared saunas (usually 120°F to 150°F) both work well. Salt is stable at these temperatures — it won't melt or scorch. Rock salt doesn't start to melt until well over 1,400°F, so heat alone was never really the concern.

Steam rooms are a different story. Salt is hygroscopic, which just means it naturally soaks up moisture from the air. In a steam room, where humidity sits near 100% and surfaces stay wet, that moisture absorption speeds way up. Over time the salt can "weep," develop a soft, dissolved surface, or lose its sharp edges. It's not dangerous — it just shortens the life of your wall and blurs the crisp look you paid for.

If you're set on a steamy, high-humidity room, talk to us before you order. A smaller accent panel with good drainage behind it can sometimes work, but a full wall usually isn't worth the maintenance headache.

What You'll Need Before You Start

Salt Bricks vs. Salt Tiles: Which One for Your Wall

Both are cut from the same rock salt. The difference is thickness, weight, and where each one works best.

Salt bricks (8" x 4" x 2", about 5.2 lbs each) — Thicker and heavier. Good for lower walls, bench backs, and anywhere the wall gets bumped, brushed against, or leaned on.

Salt tiles (8" x 4" x 1", about 2.9 lbs each) — Lighter and thinner. Better for accent walls, upper sections, and backlit panels, since the thinner stone lets more light glow through.

Mixing the two is a common approach: bricks along the bottom for durability, tiles up top for the glow. It's not required, but it's a solid rule of thumb if you're not sure where to start.

Tools and Materials Checklist

Salt bricks and/or salt tiles (measure your wall first — more on that below)

Salt-safe adhesive rated for high heat (regular construction adhesive can react with salt or fail at sauna temperatures)

Cement board or moisture-resistant backer board

Measuring tape and a level

Spacers or shims (1–2mm gaps let the bricks expand slightly with heat without cracking)

304 or 316 stainless steel screws or hardware, if you're using a frame — regular steel corrodes fast around salt

Gloves, safety goggles, and a dust mask for cutting or shaping bricks

A chisel or wet saw, if you need to trim bricks to fit

How to Build a Salt Wall for a Sauna, Step by Step

Step 1: Measure the Wall and Plan Your Layout

Measure the height and width of the wall you're covering, then sketch it out. Decide now whether you're doing a full wall, a bench backer, or a smaller accent panel — that decision drives how many bricks or tiles you'll need. As a rough planning number, figure on 4 to 5 bricks or 5 tiles per square foot of wall, depending on your spacing.

Step 2: Prep the Surface

The wall behind your salt needs to be clean, dry, and flat. Cement board or moisture-resistant green board makes the best base — it holds up to sauna heat and humidity far better than drywall. Clear off any dust, oil, or old adhesive before you start.

Step 3: Apply the Adhesive

Work in small sections so the adhesive doesn't set before you place the bricks. Spread it evenly with a notched trowel, the same way you'd set stone tile. Skip anything that isn't rated for high heat — it's the single most common reason a salt wall fails early.

Step 4: Set the Bricks or Tiles

Start from the bottom corner and work up and across. Use your spacers to keep a consistent 1–2mm gap between pieces — that small gap gives the salt room to expand slightly as the sauna heats up, which helps prevent cracking over time. Check with a level every few rows.

Step 5: Add Backlighting (Optional, But Worth It)

If you want the classic glowing look, install heat-rated LED strip lighting behind the salt before you seal up the wall. Mounting the bricks to a thin plexiglass or metal backing first, then installing that as a panel, makes it easier to get even light without dark spots. Any wiring for lighting should go in through a licensed electrician, especially in a high-heat, high-humidity room.

Step 6: Let It Cure, Then Test Before Full Use

Give the adhesive the full cure time listed on its label — usually 24 to 48 hours — before you turn the heater on. Run the sauna at a lower temperature for the first session or two and check that nothing shifted. Small gaps are normal. Cracked or loose bricks are not, and they're much easier to fix before the wall is in daily use.

Salt Bricks vs. Salt Tiles: Quick Comparison

Salt Bricks (8"×4"×2")Salt Tiles (8"×4"×1")Weight per piece~5.2 lbs~2.9 lbsCoverage~4–5 per sq ft~5 per sq ftApprox. weight per sq ft~23 lbs~14.5 lbsBest forBenches, lower walls, high-contact areasAccent walls, backlit panelsBacklightingPossible, softer glowBest option — more light gets throughInstall difficultyModerate — heavier, needs a sturdy backerEasier — lighter and simpler to hang

If you're not sure which fits your project, a mixed layout — bricks low, tiles high — usually gives you the best of both.

How Much Does It Cost to Build a Salt Wall for a Sauna?

Cost comes down to square footage. Based on current kit pricing, materials alone typically run somewhere between $29 and $43 per square foot, with the price per square foot dropping as the project gets bigger.

A few real examples to anchor that:

A small 4-square-foot accent panel (a common size for a home sauna feature wall) runs around $160 for tiles and adhesive.

A 10-square-foot wall lands around $350.

A 20-square-foot commercial-size wall runs about $580.

Those numbers cover materials only — bricks or tiles plus adhesive. If you're hiring a contractor to install it, labor is separate and varies by region and how complex your layout is. For larger commercial jobs — full spa rooms, hotel saunas, multi-unit installs — wholesale pricing brings the per-square-foot cost down further. It's worth getting a bulk quote before you price out a big project piece by piece.

Buying Tips: What to Look for When You Order

Check that the adhesive is actually salt-safe. Some general-purpose construction adhesives react with salt or break down under sauna heat. If a kit includes adhesive, that's usually a sign it's been matched to the material.

Expect natural variation. Because these are cut from real stone, not molded, small differences in color and minor surface texture from brick to brick are normal — not a defect. Major cracks or structural damage are a different story and should be replaced.

Buy a little extra. Order 5–10% more than your measured square footage to cover cuts, trimming, and the occasional broken piece during install.

Ask about wholesale pricing early if you're outfitting more than one room. Spas, gyms, and hotel chains building out multiple saunas usually save a meaningful amount ordering in bulk rather than room by room.

Keeping Your Salt Wall Looking Good

Salt walls don't need much upkeep, but a few habits make a real difference:

Dust it occasionally with a soft, dry cloth or brush.

Keep it away from direct water splash — a quick wipe is fine, standing water isn't.

Let the sauna air out and dry fully between uses instead of closing it up wet.

If you used metal hardware nearby, check it now and then for corrosion, since damp salt air is tough on regular steel.

Follow those, and a well-installed salt wall in a dry or infrared sauna should hold its look for years.

FAQ

Can you use Himalayan salt bricks in a sauna?

Yes. Salt bricks hold up well in dry and infrared saunas, where temperatures typically run 120°F to 195°F. They're not a good match for steam rooms, since constant high humidity causes the salt to absorb moisture and break down faster.

How much does it cost to build a salt wall for a sauna?

Materials typically run $29 to $43 per square foot, depending on the size of the project. A small 4-square-foot accent wall runs around $160, while a 20-square-foot commercial wall runs about $580. Professional installation labor is separate.

Can I install a salt wall myself, or do I need a contractor?

Many homeowners install smaller accent walls themselves with a heat-rated adhesive and basic tools. Larger commercial installs, or any project involving backlighting and electrical work, are usually better left to a contractor or electrician.

How long do salt brick walls last in a sauna?

In a dry or infrared sauna with good ventilation, a well-installed salt wall can hold up for years with minimal maintenance. Lifespan drops significantly in steam rooms or poorly ventilated spaces, where constant moisture wears down the surface.

What adhesive should I use to mount salt bricks in a sauna?