#phantom potp

I used wood filler to smooth the shape of the nose bridge and add the little part on the helmet, then I found that the beak was a little bit too short so I wanted to lenghten it

So first I've put nails in it, to have a strong structure, then some iron wire, making sure to bend the tips to avoid it poking out of the thing and stabb me

Then I added aluminium foil to fill in, and a good amount of hot glue to seal the whole thing to the plastic base and together

Next step was to add papier-mâché, to fill the gaps and sculpt the thing, and I topped it with wood-filler to give is strength and finish to sculpt the shape

Then: Sand paper, sand paper, add more wood filler, sand paper, more wood filler, sand paper, sand paper… to smooth all the shape, making sure to do something as much symmetrical as I could

Next was priming, painting, put on some eyeliner, and hot-glue-seal the cheap sunglasses glass I've found on second hand (who apeared to be just the right size, phew!)

Cons :

I could have sand paper'ed the whole thing a bit more, as you can still see the 3D printing lines on some parts

I should have made the beak maybe 1 centimeter (0,39 Inch) shorter because it's a little bit long

Pros :