#pd-680

If you are looking into NavSolve, you probably already know about the environmental benefits, about how it is HAP-free, ODS-free, and how it has a low level of VOCs. What you need to know is how the product is in practicality, how it works and how those who are using it will be affected by it.

As far as impact on personnel is concerned, you will be glad to know that NavSolve is a safe alternative. All safety practices should be followed, of course, as they are laid out in the Material Safety Data Sheet (MSDS). However, you should know that no long-term harm has been shown to come from NavSolve if those who are handling it happen to get in on their skin, in their eyes, etc. There may be a small amount of discomfort at the time, but NavSolve is very safe. Those who are using it do not need to be concerned about the chemicals that they are handling. 

As far as impact on the grease and oil is concerned, NavSolve is the very best. Studies have conclusively shown that it provides the same cleaning power as PRF-680 and PD 680. In some tests, NavSolve exceeded what these other cleaners can do. For test results, please contact Armick Chemicals or visit the website at www.armickchemicals.com.

PRF 680, the replacement itself to P-D-680, has done a fairly good job as far as being a cleaner is concerned. There is no denying that it gets the job done, that it is a solution that has been successful. Unfortunately, this is not the only qualification that matters. This is not the only thing that has to be taken into account. You also need to look at the environmental impact, at the lasting impression that it leaves upon the world. 

In this regard, PRF 680 just cannot compete. The footprint that it is leaving behind is damaging and potentially dangerous. In the world of modern industry, the future has to be considered. When looking at any sort of chemical, people need to ask: What will this do to the world in the future, to the people who live in that world?

The main way that you can use NavSolve is simply by running it through a parts washer. It works in the way that the other chemicals that you have been using - whether this means P-D-680, PRF 680, or mineral spirits - have worked in the past. The benefit is that NavSolve does the same job, in the same way, without having such a negative impact on the environment. You can get all of the parts clean of heavy greases and oils without damaging the environment and breaking the standards that the SCAQMD has imposed. 

The image that is posted above is a photograph of parts that have been cleaned in the traditional manner and parts that have been cleaned using NavSolve. As you can see, the cleaning that NavSolve provides is of the highest quality. Please visit our website at http://www.armickchemicals.com for more information.