#mini acdp

Yanhua Module 30 & Module 30 Authorization has been newly released, which supports doing Volkswagen/ Audi DQ500(0BH Continental) gearbox mileage correction without soldering. Including Audi Q3(before 2016), and VW Multivan/ Tiguan vehicle models.

Users who already have Module 19 or Module 25 can directly purchase the authorization. Other users can just purchase Module 30 to work with the Mini ACDP basic module.

Module 30 Features 1. No soldering, no risk. It supports quickly identifying the vehicle transmission model by OBD without having to remove the computer. 2. It supports adjusting mileage by plugging the special interface board into the car, no need to remove the TCM.

Module 30 Accessories

Module 30 APP Operation Steps Mini ACDP >> VW >> Gearbox mileage correction >> VW/ Audi >> DQ500(0BH CONTINENTAL) Here allows us to identify, mileage correction(auto mode/single-step mode), time correction(auto mode/single-step mode), read EEPROM, and write EEPROM.

How to connect Module 30? 1. Prepare ACDP, DB15-LAN adapter, interface board, and gearbox. 2. Connect the interface board correctly to the gearbox interface. 3. Short the CAN resistor on the DB15-LAN adapter to the "CAN-R". 4. Connect ACDP, DB15-LAN adapter, interface board, and gearbox.

Customer problem: I recently got data loss with cas3+ due to poor bluetooth transfer between android device and mini acdp, maybe this time I am lucky because this cas3+ is easy to fix and I wonder what I can do if I had a problem with cas4+ or female module...

Solution:

Situation 1. If CAS4/CAS4+ is interrupted in the middle and the coding is lost, the coding data can be restored and the vehicle can return to normal.

Steps: Select "BMW">>"CAS1-4">>"CAS4/CAS4+">>"OBD Mode">>"IMMO Mileage">>"Recover Coding data".

Note: Please connect ACDP to vehicle OBD port before recovering data.

Situation 2. If there is an interruption while running FEM or BDC, please do not quit midway, wait for about 15 minutes and the wallpaper will run automatically. If the code is lost, the EEPROM data and coding data on the mobile phone can be reset, and the vehicle can return to normal.

Steps: Select "BMW">>"FEM/BDC">>"IMMO Mileage">>"Mode 1: Add key">>"FEM/BDC initial programming process">>"Method 2: Manual single step operation".

Then choose "Step 6: Recover EEPROM Data" or "Step 7: Recover Coding Data" for data recovery.

This is a tutorial on using Yanhua Mini ACDP + Module 9 to program Land Rover 2010-2019 KVM add key & all keys lost. Users can click "Help" in app to check the connection info.

Normally, Land Rover's KVM module is at the left side or right side of the vehicle trunk. Jaguar's KVM is at the right side of the rear seat or in the front of passenger seat.

Preparation Blank key BAV-KEY adapter KVM interface board ACDP host Copper pillar OBP+ICP adapter 20PIN cable KVM module

1. Install the copper pillar, and align D1-D4 test points. As long as the 4 test points are aligned, then all test points are aligned. 2. Lock the board with PCB lock & copper pillar. Connect the OBP+ICP adapter & KVM, interface board. 3. Connect the adapter & ACDP host, and power up ACDP.

Operation Mini ACDP >> Jaguar/ Land Rover >> ICP Add key/All key lost(2015-) >> KVM ICP(MC9S12XEQ384) >> Add key auto mode

Note: 1. Please prepare the OBP+ICP adapter, KVM interface board, KVM module, BAV adapter, and blank key. 2. Save the original EEPROM, DFLASH data& the ones after programming the keys according to the software prompt. 3. ACDP device is forbidden to be powered off during the process of adding a key, otherwise it will cause the key to fail to be added.

Precautions: 1. Ensure the well-connected ACDP device, OBP+ICP adapter, KVM interface board & KVM module. 2. Follow the software prompts to save the chip data read from the KVM module.

Pin detection passed. If the detection fails, please check and clean the test points. Press "Continue".

It is detected that the KVM module chip has been encrypted. Press "Continue". Please save the original PFLASH data of the KVM module. Please save the original EEPROM data of the KVM module. Please save the original DFLASH data of the KVM module.

Check the VIN number and other vehicle info, and press "Continue". Note: 1. To maintain the ACDP device power-on state, first disconnect the OBP+ICP adapter from the ACDP device(keep the OBP+ICP adapter, KVM interface board and KVM module connected). 2. Then connect the ACDP device to the BAV-KEY adapter and place the programming key correctly on the BAV-KEY adapter. Current key ID: 822D4E37

Choose the unoccupied key ID displayed as 000: Key3 Please save the EEPROM data of the KVM module after adding the key. Please save the DFLASH data of the KVM module after adding the key.

Note: 1. Keep the ACDP device powered on. First, disconnect the BAV-KEY adapter from the ACDP device. 2. Then connect the ACDP device, OBP+ICP adapter, KVM interface board, and KVM module to ensure normal communication. Continue >> Continue Check the IMMO info. As you can see, the new key ID is in the key list. Writing chip... Adding the key completed. Please install the KVM module to the car and confirm that the new key can be used normally! OK >> OK

This is how to use Mini ACDP JLR KVM Module for key programming.

This article comes with the new update function notice and usage about Mini ACDP. Part 1: Yanhua Mini ACDP newly update functionACDP added BMW ECU clone function:- Support BMW N13, N20, N63, S63, N55, B38 DME, etc. Read and write DFLAH and PFLASH to achieve DME cloning. - Read and write data without opening the DME shell and punching. - More types of ECUs are increasing...

yanhua-mini-acdp-bmw-ecu-clone-Advantages: No Soldering, No Risk! No removing DME shell anymore! No need to drill the hole!

Part 2: Yanhua Mini ACDP BMW ECU clone usageAll need: Mini ACDP programming master basic version BMW ECU clone module with software licensed BMW DMEThe corresponding DME interface board

Main steps: Step 1: Connect all the devices well

Step 2: Enter Mini ACDP APP” Click “BMW”-> “ECU Clone”

Step 3: Select the corresponding DME type and function

US$248 - Yanhua Mini ACDP Programming Master WIFI For BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+FEM BDC IMMO Key Programmer and Odometer

http://www.obd2tool.com/goods-10019-Yanhua+Mini+ACDP+Programming+Master.html

6 Different Authorization. When you order, please choose authorization you need freely ! 

1.Only hardware

2. Hardware + BMW CAS-CAS3+ Key Programming by OBD : 

Read CAS EEPROM 

Add Keys 

Reset Mileage 

Back up or recover CAS 

All keys Lost

BMW CAS4/CAS4+ 

Read CAS4 EEPROM without soldering/welding 

Add Keys without soldering/welding 

Reset Mileage without soldering/welding 

Back up or recover CAS without soldering/welding