#microwavesensor

Quick Sense(Qs-M6): Ceiling Microwave Sensor 360 degree(FLUSH MOUNT)

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible through doors, panes of glass or thin walls.

SPECIFICATION: Power Sourcing: 220-240V/AC

Power Frequency: 50Hz HF System: 5.8GHz CW radar, ISM band

Detection Range: 360°

Ambient Light: <3-2000LUX (adjustable)

Installing Height: 1.5~3.5m Rated Load: 1200W (incandescent lamp)

Transmission Power: <10mW 300W (energy-saving lamp)

Time-Delay:min.:10sec±3sec

Power Consumption: approx 0.9W Max.: 12min ± 1min

Detection Distance: 1-8m (radius) adjustable

Quick Sense(Qs-M3): Ceiling Microwave Sensor 360 degree(Slim type)

The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz ) and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the "switch light ON" command. Detection is possible through doors, panes of glass or thin walls.

The microwave sensors is according to the microwave doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area.

The Detection way has the below advantages compared with other as follows:

1. Non-contact Detection,

2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light^

3. RF interference ability,

4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring.

We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: – 15 ~ + 70 Celsius degrees.

Important: persons or objects moving towards the sensor are detected best!

NOTE: the high-frequency output of this sensor is < 10Mw- that is just one 100th of the transmission power of a mobile phone or the output of a microwave oven.

Power Supply220V-240VAC

Power frequency50/60Hz

Installationindoors, ceiling mounting

HF system5.8GHz CW radar,ISM band

Rated load:1200W

Detection angle:180

Reach1-8m(radii.), (adjustable)

Time setting8sec to 12min,(adjustable)

Light control2~2000LUX,(adjustable)

Quick Sense(Qs-M1): Ceiling Microwave Sensor 360 degree

The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz ) and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the "switch light ON" command. Detection is possible through doors, panes of glass or thin walls.

The microwave sensors is according to the microwave doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area.

he Detection way has the below advantages compared with other as follows:

1. Non-contact Detection,

2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light^

3. RF interference ability,

4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring.

We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: – 15 ~ + 70 Celsius degrees.

Important: persons or objects moving towards the sensor are detected best!

NOTE: the high-frequency output of this sensor is < 10Mw- that is just one 100th of the transmission power of a mobile phone or the output of a microwave oven.

Download QS-M1 Manual

Power Supply220V-240VAC

Power frequency50/60Hz

Installationindoors, ceiling mounting

HF system5.8GHz CW radar,ISM band

Rated load:1200W

Detection angle:360

Reach1-8m(radii.), (adjustable)

Time setting8sec to 12min,(adjustable)

Light control2~2000LUX,(adjustable)

Microwave Motion Sensors By Sensinova