#lonsdor

Lonsdor has introduced the Li Auto/NIO 2-in-1 Cable, a new dedicated accessory for K518 PRO users. This cable simplifies smart key programming for Li Auto and NIO vehicles by offering a faster, more convenient solution without requiring seat removal or PIN identification.

Key Features Supports Key Adding & All Keys Lost (AKL) No need to remove the seat No PIN identification required Free activation Plug & Play operation Pre-order available now

Dedicated Connectors The 2-in-1 cable includes dedicated connectors for different vehicle brands: Li Auto dedicated connector No PIN identification required Plug & Play connection NIO / Land Rover / Jaguar dedicated probes Easy connection for supported models

Supported Vehicles Li Auto Li Auto L6 (2024-2026 Smart Key) Li Auto L7 (2023-2026 Smart Key) Li Auto L8 (2022-2026 Smart Key) Li Auto L9 (2022-2026 Smart Key) Li Auto MEGA (2024-2025 Smart Key)

NIO NIO ES6 (2018-2022 Smart Key, Free PIN Code) NIO EC6 (2019-2022 Smart Key, Free PIN Code) NIO ES8 (2018-2022 Smart Key, Free PIN Code)

Supported Device Lonsdor K518 PRO

Why Choose the Lonsdor Li Auto / NIO 2-in-1 Cable? Designed specifically for professional locksmiths and automotive technicians, this new cable streamlines key programming by eliminating unnecessary steps. With no seat removal, no PIN identification, and plug-and-play operation, it helps save time while improving efficiency during both key-adding and all-keys-lost procedures.

The Lonsdor Li Auto / NIO 2-in-1 Cable is now available for pre-order.

What's New: LONSDOR K518 and K518 PRO now receive their first release for 2025+ Lexus 8A-B6 Key Programming License. This update adds the Add Key capability with Free PIN Code support for selected 2025+ Lexus models. The function requires activation and specific hardware, with all technical requirements listed below.

Functions Add Key Free PIN Code

Supported Devices Lonsdor K518 Key Programmer Lonsdor K518 PRO

Activation Toyota/Lexus 8A/4A New Model License Activation fee: USD $45 Users with a valid annual subscription do not need to pay the activation fee. Simply update the device to access the function.

Supported Models Supports the following 2025+ Lexus models: RX TX NX UX 350 RT h+ Series

Hardware Requirements The following hardware must be used together: FP30 cable LT21-07 smart key (PCB)

Credits & Licensing Includes 160 credits (approximately USD $23 value). Earn back 10% credits after each use (1 free use for every 10 uses). Credits can be obtained by: ① Purchasing through a local distributor. ② Swapping points at a 100:1 ratio. Credits can be managed in either location: ① On the device: Buy credits through a distributor or swap points. ② Lonsdor APP: Settings → Total Credits → Redeem.

Why This Update Matters This first-release update enables LONSDOR K518 and K518 PRO to perform Add Key operations with Free PIN Code support for 2025+ Lexus 8A-B6 vehicles. Before programming, ensure the device is updated and use the required FP30 cable together with the LT21-07 smart key to complete the procedure successfully.

This guide explains how to program a new smart key for a 2023 Toyota Yaris using the Lonsdor K518PRO. The process involves detecting existing keys, programming a new key, and testing all functions.

Tools Required: Lonsdor K518PRO Key Programmer OBD cable Original key New smart key

Step-by-Step Instructions: 1. Connect Device: Plug the OBD cable into the vehicle's diagnostic port.

2. Select Vehicle: Turn on the K518PRO and select "Immo& Remote→Toyota→ Select from vehicle →Yaris→2021- →Smart Key→ PEPS(CAN)"

3. Detect Existing Keys: Select "Key count", follow on-screen prompts to place the original key near the ignition: Open the driver's door and turn the ignition ON. The device will detect the original key.

4. Add New Key: Select "Add Smart Key" on the device. Keep the door open and ignition ON. When prompted, hold the original key to the immobilizer coil until you hear two beeps. Then place the new key near the coil until you hear three beeps.

5. Confirm Programming: Select "Key count" again. Both keys should now show as recognized.

6. Test Functions: Remote Test: Use both keys to lock/unlock doors remotely. Smart Function Test: Leave one key inside, take the other outside, and start the ignition. Ignition Test: Start the vehicle with the new key.

Result: Both keys should operate all remote, smart, and ignition functions normally.

Notes: Ensure the vehicle battery is stable during programming. This procedure is confirmed for the 2023 Toyota Yaris. Keep original keys accessible throughout the process.

This article explains how to program a smart key for a 2016 Toyota Levin (IMMO 8A) using the Lonsdor K518 PRO and TY8A-MK1 Kit, including a scenario where all keys are lost (AKL). Follow the steps carefully to complete both key generation and remote programming.

Tools Required: Lonsdor K518 PRO OBD communication cable TY8A-MK1 Kit New smart key

Step 1: Vehicle Preparation and Wiring

1. Open the fuse box, unplug the relay, and connect the 8A all-keys-lost harness. 2. Remove the steering wheel screws and open the steering column cover. 3. Unplug the lock connector, then connect the 8A speed limit A5 plug. 4. Connect the A7 plug to the adapter. 5. Plug the A4 plug into the vehicle’s OBD port. 6. Connect the OBD cable to the K518 PRO device.

Step 2: Read IMMO Data and Generate Master Key

On the K518 PRO, follow this menu path: [Immo & Remote] → [Toyota] → [Select by type] → [IMMO] → [8A IMMO AKL (Mechanical Key)] → [8A Immo AKL – Generate Master Key by OBD]

1. After the connection is completed, select [OK] to continue. 2. Adapter board detection will complete automatically. *No adapter board software upgrade is required. 3. During the process, the anti-theft indicator light may turn on — this is normal. 4. Wait for the communication process to finish. 5. Enter a filename to save the IMMO data. 6. Data reading will complete successfully.

Step 3: Generate the Working Key

Use the saved IMMO data file to generate a working key.

Follow the on-screen prompts.

For the first key:

Place the new key into the card slot of the device.

Once the process finishes, the screen will confirm key generation successfully.

Restore the original vehicle wiring harness.

Chip programming is now complete.

Step 4: Remote Control Programming

Select: [Remote] → [Type 2 (CAN)] → [Programming Remote]

Turn ON the ignition.

Open the driver’s door.

Press and hold the Lock and Unlock buttons together for 2 seconds, then press the Lock button again.

Click OK on the device once finished.

The screen will display Remote Programming Successful.

Step 5: Functional Test

Press the brake pedal.

Insert the key and start the vehicle.

The vehicle should start normally.

Test the remote functions:

Lock the car

Unlock the car Both key start and remote control functions should operate normally.

Video Guide Watch the full video tutorial here:

For more information, visit www.obd2shop.co.uk.

This guide walks you through the process of programming a new smart key for a 2023 Toyota Yaris using the Lonsdor K518 PRO, even in an all-keys-lost situation.

Step 1: Connect the Device Connect the OBD cable of the Lonsdor K518 PRO to the vehicle.

Step 2: Enter the Vehicle Menu On the K518 PRO home screen, select: [Immo & Remote] → [Toyota] → [Select from vehicle] → [Yaris] → [2021-] → [Smart key] → [PEPS (CAN)] Choose [All smart key lost]. The tool will prompt: "This function is used to initialize PEPS ECU, continue?" Click OK. The system will begin communication—please wait.

Step 3: Program the New Smart Key When prompted: Hold the new smart key close to the Start/Stop button for about 30 seconds. You will hear the vehicle beep three times, which indicates the programming process has been completed.

Step 4: Test the Key Functions Test the remote functions (e.g., Lock/Unlock). Test the smart key functions, such as keyless start. If both work normally, it confirms that the new key has been successfully programmed.

Result Using the Lonsdor K518 PRO, the 2023 Toyota Yaris all-keys-lost programming procedure is completed successfully.

Watch the full operation video here: https://www.youtube.com/embed/_hkWTSAuat4

This tutorial guides you through programming a new smart key for the 2024 Honda CR-V when all keys are lost with Lonsdor K518 PRO.

Tools Needed Lonsdor K518 Key Programmer OBD communication cable Lonsdor Honda Smart Key

Step-by-Step Procedure Step 1: Generate Smart Key 1. Connect K518 PRO to the OBD port, select: Generate Smart Key→ HONDA → CRV → CRV 4A 2. Place the new smart key in the card slot. 3. Click "Generate." Wait for "Generate successfully".

Step 2: Program All Keys Lost 1. Return to the main menu, choose: IMMO & Remote → HONDA → Select From Vehicle →Asia → CR-V →2023- → Smart Key→PUSH Button → All Smart Key Lost 2. Follow the on-screen prompts and click OK: ① Turn the ignition OFF. ② Place the new smart key inside the vehicle. Ensure no other keys are within 5 meters. ③ Press the start button twice. Ignition will not turn on (all keys lost), press Cancel. ④ Long-press the start button until ignition turns on. ⑤ Click OK and enter the number of keys to program. ⑥ Within 15 seconds, turn the ignition OFF, then back ON. Wait for the security light to go off, then click OK. Repeat the OFF/ON cycle within 15 seconds. ⑦ The K518 tool will confirm: "Number of programmed keys." The key programming is completed.

Step 3: Test the Key 1. Turn the ignition OFF and restart. 2. Test the key: ① Step on the brake and press the start button - the engine should start. ② Test remote lock/unlock - functions should work normally.

This guide outlines the procedure for programming a new smart key for a 2024 Volvo S60 using the Lonsdor K518 PRO tool. The process involves both reading data directly from the Central Electronic Module (CEM) and performing key programming via the OBD-II port.

Tools Required:

Lonsdor K518 PRO OBD communication cable KPROG adapter LC202 cable A new smart key

Step-by-Step Procedure:

Part 1: Reading Data from the CEM Module

1. Disassemble and Access the CEM: Locate and carefully disassemble the Central Electronic Module (CEM) box from the vehicle. Follow the specific disassembly diagrams for your vehicle model.

2. Connect Hardware for Reading: Connect the LC202 cable to your K518 PRO and the KPROG adapter. Connect the 12-volt power cord to the K518 PRO. Connect the KPROG adapter to the appropriate points on the CEM board to read the data.

3. Read CEM Data: On the K518 PRO, navigate: [Immo & Remote] -> [Volvo] -> [S60] -> [2022-] -> [Program smart key] -> [Read CEM data]. Click [OK] to continue. You will be prompted to enter a name for the backup file. Enter a name and proceed. The tool will initialize the target chip and begin reading the data. Once you see a "Read successfully" message, click [OK]. Reinstall the CEM: The CEM data has now been successfully backed up. Reinstall the CEM box into the vehicle before proceeding to the key programming stage.

Part 2: Programming the Smart Key via OBD

1. Connect Tool via OBD: Plug the OBD communication cable into the vehicle's OBD-II port and connect it to the K518 PRO.

2. Start Key Programming Function: Navigate: [Immo & Remote] -> [Volvo] -> [S60] -> [2022-] -> [Program smart key] -> [All smart key lost]. Then, select the second menu option: [Load CEM data to obtain 10-bit security code].

3. Load the Backup Data: The tool will explain that this function requires the CEM data read via the KPROG adapter (supporting CEM main chip SPC5748G). You will be prompted to select the PFLASH or DFLASH data file. Select the backup file you created in Part 1.

4. Confirm Key Deletion: A warning message will appear stating that all registered keys will be deleted. Ensure you have all keys you wish to program ready. The tool will connect to the vehicle and delete all existing keys. You will see a confirmation: "The number of programmed keys is 0".

5. Program the New Key: You will be instructed to place the new smart key in the vehicle's induction area (typically the cup holder or center armrest). Click [OK] to begin programming. The tool will program the key. Once complete, you will see a message: "The number of programmed keys is 1". If you do not need to program another key, click [Cancel].

6. Completion: The programming process is now complete. The newly programmed smart key should successfully start the vehicle.

Video guides:

Today, we're gonna show how to add a 2023 Toyota BZ3 smart key with Lonsdor K518 PRO by OBD.

What We Need: Lonsdor K518 Pro Key Programmer OBD Communication Cable An Original Key & a New Smart Key

Step-by-Step Procedure Plug in the OBD communication cable. Immo &Remote >> Toyota >> Select from vehicle >> China >> BZ3 >> 2023- >> Smart key >> PEPS(CAN) >> Add smart key

All keys require reprogramming; unprogrammed keys will become invalid. You can program up to 4 keys. Click OK to confirm the IK controller serial number.

Start to program no.1 key, pls hold the key closer to the car start button, click OK to continue. Programmed successfully. Click OK to program the next key. Start to program the no.2 key. pls hold the key closer to the car's start button, click OK to continue. Programmed successfully. Click Cancel to complete. Count of currently programmed and valid keys: 2

Both keys can start the vehicle and remote work well. Done.

The Lonsdor K518 Key Programmer proves to be a reliable and user-friendly tool for modern Toyota smart key programming.

Video guides: