#kerb construction

A kerb construction is a physical or painted concrete or stone structure, usually located at the edge of a road, designed to prevent vehicles from leaving the road, and sometimes to provide separation between two adjacent lanes.                                       

Type of kerb:

·        Natural stone kerb

·        Precast concrete kerb

·        Cast in-situ concrete kerb

Plants, equipment and machines for kerb construction:

·        Transit mixer

·        Concrete mixing plant

·        Kerb casting machine

·        Water tanker

·        Kerb cutting machine

·        Measurement-related equipment

Features of kerb construction:

·        Horrible-free execution

·        Non-corrosive

The kerb construction is the raised edge of a pavement which separates it from the road.

We can install Kerb height raise for each specific location by adjusting the kerb height to ensure the safe spacing of the bus ramps. Many locations require raised kerb to comply with the Disability Discrimination Act.  Location can be adjusting the height of the curb to ensure the safe placement of bus ramps. It is the dividing line between carriageway and footpath.

Types of  Kerb height raise are:

·        Low or mountable kerbs: – Height of 10 cm above the pavement edge. – With a slope which allows the vehicle to climb over easily.

·        Semi-barrier type kerbs: – Height is 15 cm above the pavement edge.

·        Submerged kerbs: – They are used on rural roads. Curbs are provided at pavement edges between pavement edge and abutments and provide lateral confinement and stability to pavement.

The Kerb Casting Machines is minimal expulsion type hardware for projecting nonstop Kerbs, channel and other solid arrangement utilized in kerb Construction. The Machine has Electric/Hydraulic controls for three working elements of tallness, line and cross level.

Kerb casting machines are widely used in road works and are highly acclaimed for their durability and optimal performance. Kerb casting machine has a continuous output with four cylinders of water-cooled diesel of 29 HP. It has a separate pump for a drive and other functions. Inbuilt with hydraulic vibrator and a 3-bank pressure compensated regulator. And also has a sensor to control slope, pipe and slope with remote controlled slope.

The kerb construction is the raised edge of a pavement which separates it from the road.

We can install kerb height raise for each specific location by adjusting the kerb height to ensure the safe spacing of the bus ramps. Many locations require raised kerb to comply with the Disability Discrimination Act.  Location can be adjusting the height of the curb to ensure the safe placement of bus ramps. It is the dividing line between carriageway and footpath.

Types of  Kerb height raise are:

·        Low or mountable kerbs: – Height of 10 cm above the pavement edge. – With a slope which allows the vehicle to climb over easily.

·        Semi-barrier type kerbs: – Height is 15 cm above the pavement edge.

·        Submerged kerbs: – They are used on rural roads. Curbs are provided at pavement edges between pavement edge and abutments and provide lateral confinement and stability to pavement.

Apollo KLM 1200 is an ergonomically designed and easy-to-use slip form edging machine with features that allow straight, level and precisely shaped edges to be placed. The machine, can lay continuous edges. It can operate at a speed of 180 meters per hour.

Kerb casting machines are widely used in road works and are highly acclaimed for their durability and optimal performance. Kerb casting machine has a continuous output with four cylinders of water-cooled diesel of 29 HP. It has a separate pump for a drive and other functions. Inbuilt with hydraulic vibrator and a 3-bank pressure compensated regulator. And also has a sensor to control slope, pipe and slope with remote controlled slope.