#j750

Click here to know how to make a continuity test on J750 (3.50.50)

In this post I will show you how to make a continuity test on J750 with the template. In the first part, I will show you how to make the test with the DPS and in the second with the PMU.

Continuity Test for DPS

For this test I will use the PowerSupply_T template. See below the instance sheet

Example of Instances sheet with continuity test

To edit the template right-click on the name…

Click here to know about theflow and the test instances on J750 (3.50.50)

In this post I will show you the basic of the programmation on J750 through the flow and the test instances. I will begin by the test instances and after I will show you the flow.

The Test Instances

The test instances are the main sheet for the tests. In this sheet you have all the definition of the test, that will tell to the tester what to do and what to execute.

Let see an example…

How to set the level on J750? (3.50.50)

In this post I will show you how to set the level sheet on J750 and how to use the DC spec.

Add a signal in the Levels sheet

To add a new signal in the level sheet on J750, you write the name of the signal or signal group in the Pin/Group column.

Write the name of the signal under Pin/Group

The system will automatically create all the lines.

The system will automatically add all…

How to define timing set on J750? (3.50.50)

On this post I will show you how the timing set sheet works on J750 and the specificity of the J750. I will start by an overview of the different part of the sheet and I will give you an example of settings for a SPI pins.

The Timing set sheet

On this sheet you will define all the timing, you need for the patterns.

Timing mode

There are 2 modes the extended and the normal.

Setting…

How to set channel and pin on J750? (3.50.50)

In this post I will show you how the channel map and the pin map work on J750. I will begin with the pin map, after I show how to set the job file and in a third part I will show you how to set the channel map.

The channel map on J750

On the channel map, you will manage the different package of the chip and the connection to the tester.

In this sheet you will tell to the tester which…

How to use the DC spec on J750? (3.50.50)

In this post I will show you how to use the DC spec on J750. I will give you some advice to work correctly on this sheet.

Overview of the DC spec

You can see below the DC spec:

Overview of the DC spec on J750

Symbol: the name to use on the other sheet to link the setup to the instrument

Selector/name: The name of the selector. It is used on the instance sheet

Selector/Val: The name of…

How to use the AC spec on J750 ? (3.50.50)

In this post I will show you how to set the AC spec on J750. I will give you some advice to manage correctly this sheet.

Overview of the AC spec on J750

I will find below the sheet of the AC spec

AC spec sheet on J750

Symbole: Is the name you can use on Level sheet to set the levels

Value: The value of the actual select configuration or select test in the tool bar

Selector / Name: The…

How to manage different test flow on one test program for J750 ?

In this post I will present how to manage different flow on one test program.

Why do you need to have different test flow on one test program?

You can have all in one test program. I recommend this method to maintain only one test program with all your tests. For example, you can have a qualification, wafer test and package test in one test program.

With that you can reuse the different test…