Introduction of IP65 protection level of LED lamps!
At present, most of the LED lights used outdoors in my country adopt the IP65 protection level, and most of the LED lights used in the world are mainly based on the IP65 protection level.
With the continuous development of science and technology, the environment has also encountered great damage, and the wet weather has become slower. The IP65 protection level of lamps is no longer enough. Therefore, major manufacturers have introduced IP66 waterproof protection levels, and even Some have introduced IP67 protection level. It seems that the improvement will be a new milestone in the development of lamps.
Generally speaking, the waterproof structure of the LED lamp adopts the face cover (end cover) and the silicone rubber sealing ring to be relatively stable, but if the assembly line employees are not skilled in the assembly, it is easy to cause uneven connection pressure between the face cover and the shell; leading to waterproof glue The loop leaks and cannot be truly waterproof. The other is glue and waterproof. If you use epoxy, it is the most stable, but it is inconvenient to maintain. If you use cured silicone rubber, I am afraid that there will be many follow-up problems. Therefore, the lamps must be truly waterproof; in addition to using the best and most economical and suitable waterproof materials and structures, there is also the management and training of the production line staff, so that the products can be truly qualified. Finally, air-tightness testing equipment must be used to test the waterproof level of the lamps, effectively kicking out defective products.
Which one is better for the IP65, IP66, and IP67 protection level detection of LED lights? Airtight leak detector is a good choice.
Features of IP65 housing for LED lamps:
1. Completely dust-proof, oil-proof and other non-corrosive materials
2. Completely prevent contact with enclosed equipment
3. Waterproof, until the nozzle sprays water on the shell from any direction
4. Provide screen printing, anodizing or engraving services
6. Customized with cutouts, insulation, hinges, latches or locks
7. IP65 electrical enclosure protection standard
