#hpsupportchat

You can permit to print from a laptop on identical network while not having to connect the printer to your laptop. Not all HP printers have wireless practicality, so make sure your printer is capable of connecting to the Internet before continuing.

Connecting Automatically

1.    Make sure that your laptop and network are compatible. So as to utilize HP Auto Wireless Connect, your PC and system setup must meet the accompanying requirements:

Your laptop should be running Windows Vista or later (PCs), or OS X 10.5 (Leopard) or later (Macintosh).

Your laptop is connected to an 802.11 b/g/n wireless router over a 2.4 GHz connection. 5.0GHz networks are not currently supported by HP.

Your laptop's operating system must be in control of the wireless network.

Your laptop must use a wireless connection to your network and the operating system.

Your laptop must use a dynamic IP address, not a static one (if you haven't explicitly paid for a static IP address, you most likely have a dynamic IP address).

2.    Search for your printer's software. Go to https://support.hp.com/us-en/drivers/ and type in your printer's model number, click Find, and click Download next to the top software entry.

3.    Double-click the software file. It will open a printer setup process.

4.    Turn on your printer. If your printer is compatible with HP Auto Wireless Connect, doing as such will set up the printer to interface.

The printer will just hold this setting for 2 hours.

5.    Follow the on-screen directions till you reach the "Network" section. These will differ contingent upon your printer model and laptop working framework.

6.    Select Network (Ethernet/Wireless). This option is within the middle of the page.

7.    Click yes; send my remote settings to the printer. Doing thus can find the printer and send your wireless network's data over to the printer.

8.    Wait for your printer to connect. It may be a couple of minutes before your printer is ready to attach. Once it does, you should see a confirmation on your laptop's screen.

9.    Finish the setup process. Complete the setup on your laptop by following the remainder of the on-screen prompts. Once the setup is complete, you'll be ready to begin exploitation your printer.

You can utilize model number to explicitly recognize your gadget to individuals endeavoring to support it, or to guarantee that a bit of equipment (e.g., a battery) is perfect with your workstation.

Strategy1.   Using the Product Label

1.    Shut down your workstation. You can do this on any adaptation of Windows by holding down the workstation's capacity catch until the machine kills.

 Ensure you spare and close all work before doing this.

 On Windows Vista and up, you can tap the Start catch in the base left corner of the screen, click the power symbol, and snap shut down.

 2.    Unplug your PC from any power sources. This is to guarantee that you don't get stunned when you expel your PC's battery.

3.    Turn your workstation over and evacuate its battery. Much of the time, you'll do as such by sliding a change to one side or right, holding it there, and delicately sliding the battery out.

 On the off chance that there is a sticker on the base of your PC with item data, you should not have to evacuate the battery.

4.    Discover the "Item" mark. Regularly, this name will be in an area separate from the "Administrative" some portion of the data here. By the "Item" mark will be a progression of numbers and letters; this is your HP PC's model number.

On the off chance that you can't discover "Item", search for a "Sequential" heading. While your PC's model number doesn't correspond to the sequential number, it's normally recorded some place beneath the sequential number.

5.    Record the model number. In case you're regularly endeavoring to get help for your PC from a specialist, furnishing them with this number will probably accelerate the administration procedure.

  Strategy2.    Using System Information

1.    Hold down ⊞ Win and press R. This will open the "Run" direction on any Windows PC.

On PCs running Windows 7 or later, you can likewise right-click                        the Start menu and after that click Run.

 2.    Type msinfo32 into Run. Do as such in the hunt bar to one side of the "Open:" heading.

3.    Snap OK. This will open the Windows System Information utility, which contains insights concerning your particular model of PC.

4.    Discover the "Framework SKU" segment. It's close to the center of the System Information page. The number inclined to one side of "Framework SKU" is your HP workstation's model number.

You can likewise discover your PC's item name in this window by taking a gander at the name beside the "Framework Model" class.

5.    Record the SKU number. Giving this data to a tech or utilizing it to advise a look inquiry for drivers or equipment will guarantee that your PC gets relevant information.