#hanking

Industrial molding parts are referred to the plastic parts of industrial products, we preferred to think of it as non-consumer products.

 Nowadays, the demand for consumer products is oversupplied, and the demand for industrial products is increasing. This is because many parts of the equipment in the past were made of metal. With the development of the plastics industry, more and more industrial product parts are trying plasticization. Metal parts have higher density, greater strength, and thermal and electrical conductivity. However, plastic industrial parts have advantages in mechanical shock absorption, thermal expansion, elongation at break, and toughness. And the properties of plastics can be greatly transformed by the addition of fillers, reinforcing materials and modified materials, engineering plastics perform better in this respect. Use plastic to produce parts that are not necessary for high strength can reduce the weight of equipment, simplify the structure and save costs, this is why industrial molding parts are becoming more and more common.

 Industrial molding parts range from small plastic gears to large industrial equipment plastic enclosures. The design of the mold is very complicated work, the plastic part structure, the different plastic resin, required life cycle, etc. many factors determine the mold construction.

 Our designers must master the properties of different plastics and mould steel, and consider the temperature change, pressure change, steel abrasion during the production process, designed qualified mould.

 If the mould structure is unreasonable, even the most excellent operator can not get good plastic parts. The design defects cannot be solved by the defects in the production process. Only when all the factors are considered in the design of the mould, the mould quality and stability of the mass production can be guaranteed.

 https://www.hanking-mould.com/products/industrial-molding-parts/

https://www.hanking-mould.com/products/insert-molding/What is insert molding?

Insert molding refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified.

 Insert molding features are as follows:

 The moldability and flexibility of plastic resins, as well as the rigidity, strength and heat resistance of metal parts, create complex and sophisticated metal-plastic integrated products.

 In particular, the electrical product made by insert molding, together with the insulation of the resin and the electrical conductivity of the metal, can meet the basic functions of electrical products.

 The pre-formed combination of multiple inserts makes the subsequent product unit combination engineering more rational.

 Inserts are not limited to metal, but also cloth, paper, wire, plastic, glass, wood, wire, electrical parts and so on.

 For the rigid molded product and the curved elastic molded product on the rubber gasket plate, the parts by insert molding can eliminate the complicated operation of installing the sealing ring, and help the subsequent process automation.

 Compare to the press-in molding, the metal insert gap can be designed to be narrower, and the reliability of the composite product molding is higher as the plastic resin is molten to wrapped with the metal insert.

 Selecting the appropriate plastic resin and injection molding conditions, even for products that are easily deformed or broken (such as glass, coils, electrical parts, etc.), can be sealed and fixed by insert molding with plastic resin.

 Designed the appropriate mould construction, the insert can also be completely enclosed in the plastic resin.

 By the combination of a vertical injection molding machine and a robot, insert arranging mechanism, most of the insert molding projects can be automated.

 The product with a hollow groove also can be made by insert molding after the core hold treatment.

 https://www.hanking-mould.com/products/insert-molding/

Industrial mould is not a mold technology process, but a type of mold that is distinguished from the purpose of use.

 Generally speaking, products produced with industrial molds are used for processing or business operations, such as industrial instruments, valves, fittings, pipes, tools, etc..

 What types are moulds classified by structure?

 Side plate mould

 Pinpoint plate mould

 Three plate mould

 Reverse gating mould

 Stack Mould

 When we classified by mold steel, they are soft mould, prehardening mould, hardened mould, stainless mould, aluminum mould, beryllium copper mold. We determine the type of mold to be made according to the needs of our customers.

 What's the industrial mould hardening method?

Normally there are heat treatment, nitriding treatment, chrome plating, nickel plating.

 There are cold runners and hot runners from the type of runner.

 Which runner is used depends on the cost of the raw material and total output of the product, under the premise of ensuring quality, the mold development cost is reduced as much as possible, thereby reducing the research and development cost of the entire project and improve the competitiveness of the product.

 HANKING has extensive experience and expertise in the design and manufacture of custom industrial molds, enabling HANKING to develop practical, production-based solutions for many years of practice.

 We can make small batches of production for customers as well as validation production at all stages and provide FAI, CTF, CPK report.

 Mould trial report, mold temperature monitoring records is able to help customers quickly start the production after receiving the molds.

https://www.hanking-mould.com/products/industrial-mould/

Não tem mais a desculpa de que não sabia em quem estava votando!!