Gasket Maker Epoxy is one of the most effective and time-saving equipment that any operator would love to have in their shops. When you compare the price of the traditional gaskets with the gasket makers, you will find the latter much cheaper. As, having a gasket maker in your shop ensures that you can deliver every part at the right time.
The reliability of the Silicone Gasket Maker is also on the higher side. Unlike the traditional gaskets, the new and improved Gasket Makers can completely do away with the leak paths. They are also very resistant to different types of fluids, temperature fluctuations, and vibrations.
That being said, you have to know the proper usage of the Silicone Sealant RTV to reap the maximum benefits. In the following section of this article, we have come up with the few mistakes you should never make while using the gasket maker. Check it out.
Replacing the Head Gasket:
While the advanced Silicone adhesive gaskets of today can replace almost every type of traditional gasket, you should never replace the main gasket with it. Always choose the OR-style gasket for the cylinder gasket heads.
Using Wring Gasket Maker:
It is one of the gravest mistakes that you should not make while using the market maker. There are different types of RTV Silicone Gaskets available in the market that are meant for specific purposes. You should know about the formulation of gasket makers to understand which one is perfect for which type of conditions.
Using one Silicone Gasket Maker for every situation is the gravest and the silliest type of mistake that you can make.
Using Far too Much Gasket Maker:
While we are talking about Silicone Sealant RTV Gaskets, more does not mean better. Understanding the required amount of gasket, of course, requires certain practice and experience, but you should know the amount that is almost perfect for every situation.
For example, a bead with a thickness of about 1/8 inches works well for most situations. In this way, when you tighten the assembly of the machine, the gasket maker will automatically spread out to form a thin layer. You just need to use the RTV Silicone Gasket Maker in an even and continuous manner.
Anaerobic Gasket Maker and Gasoline:
You need to understand more about the Silicone Adhesive Gasket Makers before using them. For example, you should know that only the solvent base gasket makers can withstand contact with gasoline.
However, the anaerobic gasket makers are not resistant to gasoline. So, exposure of it makes the gasket weaker and reduces the robustness of the Flange & sealing.
Filling Large Gap With Anaerobic Gasket Maker:
Most of the Anaerobic Gasket Makers are created for sealing the gaps between two closely associated metal surfaces. So, if you try to seal large gaps with it, the chances of sealing failures are enhanced by manifolds.
Know that you know what the gasket makers are and some of the common mistakes of using it, you can start using it. However, the more you will gather information about the Gasket Maker Epoxy, the easier it would be for you to handle it.
