#farming machine

Suspension-type Sprayer This sprayer has the prominent properties of high efficiency, environmental protection and energy saving compared with the con-generic products. At the same time, it is a kind of suspension-type & air-assisted machine with superfine droplet design, simple mechanical drive, good handling quality, used with a tractor for farmlands, orchards, green belts, tall trees, etc…

Heavy Duty Disc Harrow Classification of Heavy Duty Disc Harrow

Offset Disc Harrow can be worked upon in an offset position. A single change in hitch makes the harrow to move either to the left or right side of the tractor. This is very popular nowadays as it gives a very smooth soil.

1BZ series hydraulic heavy-offset disk harrows are available in both mounted and trailing types. Their sizes vary according to the size and capability of a tractor.Designed by confidently advanced technology of our company connecting with international technology through many times of experiments, disc harrows are mainly used for middle and large size of tractors, Hp about 55-160. With steady structure and fine effect on hard plain and harrowing wasteland, disc harrows have been popularly exported to many countries and districts.

IBZ series hydraulic heavy-offset disk harrows are equipped with hydraulic lifting tires and spring leveling mechanism and designed by international advanced ideas, with using steel structure as the main harrows body. So, this heavy harrows are especially suitable to plough large farmland with the features of durable structure, easy transportation and easy maintenance.

Connect: Ella

center pivot sprinkling machine

Basic Information of Center Pivot Sprinkling Machine This center pivot sprinkling machine is also called pointer-type sprinkling machine, a kind of irrigation equipment featured by saving water and improving productivity. It is mainly used for irrigating various agricultural crops, industrial crops and pastures, such as corn, wheat, vegetables, sugarcane, cotton, seedlings and grass, etc.

Proper Operation and Maintenance of Rice Transplanter

A rice transplanter is a specialized transplanter widely used to plant rice seedlings in the paddy field. The machine can both improve the efficiency and quality of rice transplanting. However some questions are claimed by the clients when using the paddy transplanterand we found that most of the problems are caused by the unproper use of the rice planter machine. In the following, we will give…

Corn Planting and Harvesting Seasons

The key to a successful soybean harvest is preparation and anticipating problems, and here are some top tips to help you head into harvest with the fewest headaches, breakdowns and delays:

1. Inspect the soybean harvester in advance. Inspect belts and chains for proper tension; check auger flighting wear and look at wear on rasp bars and the cylinder or rotor concave, also check the cleaning shoe for broken or bent sieves; check the cutter bar for wear and flex and height-control adjustment to help assure less loss caused by cutter bar in harvest. Ensure all knives are sharp and that knife guards are tight and in good condition. Know the recommended combine and cylinder settings, and have the equipment well maintained and ready to go by harvest.

2. Pre-scout fields by mid-August for weed issues before harvest. Viny weeds like morning glory and bur-cucumber can create difficult challenges at soybean harvest, and if fields have viny weeds, you might have to wait until they dry down to harvest. 3. Carefully monitor moisture content to stop shatter losses. The biggest mistake with soybean harvest is poor timing, harvest fields sooner rather than later to avoid the repeated drying and rewetting cycles that can increase shatter losses once moisture levels initially drop below 13%. Try to time your initial harvest right around 15% moisture content, as you move from one field to another, recheck the moisture content and adjust your soybean combine harvester settings.

4. Get low, stay low. Lodged or stunted beans can present a challenge at harvest, get the reel or soybean head down low enough so that you are not missing any pods. If the crop is standing well, you can set the reel index(ratio between reel speed and ground speed) for the bat and finger pickup somewhere between 1.25 and 1.50 (25% faster or 50% faster than ground speed). If the crop is lodged, you can increase the reel index to 1.50-2.00.

5. Adjust on-the-go. Check your grain tanks periodically for un-threshed pods and split or damaged beans and adjust concave and cylinder setting on-the-go as necessary, also check the ground behind the soybean harvesting machine for un-threshed pods or for shelled beans and adjust the blower and sieve settings if necessary.

6. Screen your beans. If you are storing soybeans for future delivery in March or April, screen them prior to loading them into the bin, because pods that are green, weed seed and fines all contribute to an increases chance of spoilage. You can also unload soybeans from bins, run them through screens and reload them into bins later in the fall.

7. Stay safe. Consider safety issues and emergency preparations before harvest.

Paddy Transplanter 

All farming machines at:http://farming-machine.com/

If any needs, pls contact with:

E-mail:[email protected]

Amisy threshing machine

We supply all kinds farming machines from Threshing Machine to Tillage Machine.

Company website:http://www.farming-machine.com/

If intrested, please feel free to contact with: [email protected]