EXPONENTIAL DESTRUCTION - a dual distortion for paralell or serial noise action
EXPONENTIAL DESTRUCTION is two distortion pedals in one. Each in its own hemisphere, but connected in the center by a mutual STARVE control. Sonically the hemispheres are not totally separate as the both channels distortions are generated on the same IC and due to the 'voltage starvation' there is a fierce battle for resources, that creates a lot of extra noises. This means all controls are very interactive and invite to play with them. Even with minimal input signal dynamics, the pedal allows to create a very dynamic range of aggressive sounds. That can be done either in PARALLEL (stereo/2xmono) using both outputs separately or SERIAL, when routing the output of one channel back to the input of the other. This makes the pedal very versatile in your noise-set up and expands the possibilities of sonic experimentation. The controls for each hemisphere are from top to bottom: VOLUME, TONE, TWEAK, GAIN and BYPASS stomp switch. The pedal is TRUE BYPASS (both channels) and both stomp-switches are indicated by a purple or green LED. Power input is a boss-style standard 9V DC socket with the negative pin inside. A PSU is not included. It is housed in a sturdy standard die-cast aluminum enclosure, with individual stenciled burned out industry camo designs. In- and output are standard 6.3mm (¼") mono sockets. On each side the upper socket is the INPUT and the lower the OUTPUT. Handmade by GRM for METSÄÄN.
