#elevatorboutique

Have a property that is heritage listed ? No problem, we have had over 20 years of experience where we have installed lifts into heritage listed terraces, large manors and factories. We work closely with key consultants to ensure the lift meets the requirements and works with the existing architecture. Check out some of the projects we have done above...

Check out the full story here

THIS PROPERTY in Hamilton is certainly modern living at it’s best with no compromises on finishes or fittings throughout, it was only fitting that our E2 sliding door elevator was selected for the project.

As such, to ensure the elevator fitted into the homes designer decor, the finishes included:

Solid two piece sliding doors– finished in Polished Stainless Steel

Walls – RHS Arpa 4303, LHS Antracite N4

Profiles and COP  –  Polished Stainless Steel

Ceiling – Labirint finished in Similinox F12PPS

Floor – Custom Timber Floor

Cabin Size – 1100mm (43.3″)  x 1400mm (55.1″)

Travel – 7209mm (283″)

Future proofing was important in the design of this new duplex dwelling, so it was only natural that an ElfoLift was also included from the outset.

With a modest cabin of 860mm (33.8″) wide x 880mm (34.6″) deep, the still generous load capacity of 300kg (661lbs) and fastest speed of 0.3m/s (59fpm) gave the owners all they required. Especially once the cabin fitout of Arpa 2012 VG SAT walls with matching F41PPS skinplate profiles and timber floorboards (perfectly lined up with the outside landings) were installed. Finishing the elegant finishes selection were the  powdercoated steel doors with large size glass vision panels.

To make it all work, the machinery area was located in an exterior side passage it is own protective enclosure – practical and perfect.

Check out the full project here

WORKING CLOSELY  with both the owners and Ian Web architects, Lift Shop provided a 4 stop adjacent entry E1 Lift.

Check out the full project here

In this builder’s own dream beach property, no expense was spared to create the ideal spacious home that the whole family could enjoy. Being in the construction industry, the builder could appreciate the logic of putting in the best inclusions now for the ongoing benefits down the track. Hence, it was only natural that the Supermec was the elevator of choice.

Whilst only appearing to be two levels at the front of the property, the sloping land to the rear created a need for a through car elevator that could service the four main levels of the home. Polished stainless steel was chosen for all the elevator surfaces and finishes to compliment the clean modern lines of the home.

The final result  – nothing short of stunning.

Check out the full project here

A collaboration between the design team at C M Hairis Architects, construction by Evidis Construction and sales/design/installation by the Elevator Boutique team resulted in a stylish streamlined integration of the elevator into the home design. The elevator shaft provides a distinctive corner to the home and a perfect opportunity to have maximum glass and views of the private courtyard and the surround pond. 

Check out the full project here