seen from China
seen from Netherlands
seen from United States
seen from Argentina
seen from United States
seen from Germany
seen from Canada
seen from Chile
seen from United States
seen from United States
seen from United States
seen from Türkiye
seen from United States
seen from Malaysia
seen from Germany
seen from Greece
seen from China
seen from China
seen from China
seen from United States
* I was excited to learn how to make these motors out of everyday items any normal human being would have around and make something pretty cool out of them.
* 10 AWG Copper Solid Wire and removed Insulation
* I made 4 turns in my coil around the battery
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
Free to watch • No registration required • HD streaming
* 10 AWG Copper Solid Wire and removed Insulation
* I made only 1 turn in my coil around the battery
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
* I was tired of bending and twisting copper wire so i decided to try something else and i went with aluminum foil.
* No Turns in my coil but slightly touching magnets
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
Homopolar Motor Conclusion
In Conclusion, i realized the fastest was The Kitty Kat was the fastest and The Aluminati seem to be fast also but had a difficult time trying to balance over the battery. ( See Videos ) I think if used more magnets and less resistance to motor would be faster and if I used less magnets and More resistance it would go slower.
In my opinion the reason why i think it needed a push to start was because just like any other motor it needs an initial force to start. :
The Wire was getting HOTTER because of the current flowing through. The more current the hotter it’ll get. The thicker the wire the more current can flow through.
For all three motors i wasn't able to measure the Inductance of the coil because i didn't bring them to class to be measured by Professor. Sowwy :(
Homopolar Conclusion
In Conclusion, i realised the fastest was The Kitty Kat was the fastest and The Aluminati seem to be fast also but had a difficult time trying to balance over the battery. ( See Videos ) I think if used more magnets and less resistance to motor would be faster and if I used less magnets and More resistance it would go slower.
In my opinion the reason why i think it needed a push to start was because just like any other motor it needs an initial force to start. :
The Wire was getting HOTTER because of the current flowing through. The more current the hotter it'll get. The thicker the wire the more current can flow through.
Anya is live and ready to show you everything. Watch her strip, dance, and perform exclusive shows just for you. Interact in real-time and make your fantasies come true.
Free to watch • No registration required • HD streaming
* I was tired of bending and twisting copper wire so i decided to try something else and i went with aluminum foil.
* No Turns in my coil but slightly touching magnets
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
* I was excited to learn how to make these motors out of everyday items any normal human being would have around and make something pretty cool out of them.
* 10 AWG Copper Solid Wire and removed Insulation
* I made 4 turns in my coil around the battery
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
* 10 AWG Copper Solid Wire and removed Insulation
* I made only 1 turn in my coil around the battery
* Resistance = 0.001Ω
* I used 4 12mm x 3mm Neodymium Magnets stacked
