#dsppa amplifier

The #MP9911P is a public address pre-amplifier with five balanced MIC inputs, three AUX level inputs and two EMC(priority) level inputs. Priority muting is achieved via EMC for overriding music for paging and emergency alarms.This preamplifier Individual gain controls are provided for MIC and AUX inputs, bass and treble controls are provided for overall tone control.

Features:

● Five microphone inputs, three auxiliary inputs, two priority inputs, four outputs

● Muting function Manual chime out

● Individual volume control

● Bass and Treble tone control

This amplifier is designed for commercial and industrial public address applications. Rack mount design in 2U type and rated power is 650W.

Features:

● Rack mount amplifier in 2U height

● 70V, 100V and 4-16 ohm speaker outputs

● Isolated transformer for human safety operation

● Rated power 650W, 5 LED indicator for status display

● Indications for power, signal, clip, protection and temp

● Reliable protection from overheat, overload, clip & short circuit

● XLR socket and 6.35mm jack for additional mixer or amplifier link

MP9811P 5 Mic 3 Aux 10 Inputs Preamplifier

Features:

DSP108 is an outdoor waterproof column speaker built-in 70v/100v transformer. The 70v/100v transformer technique reduces line losses on longer distance and allows easy parallel connection of multiple loudspeakers.

Features:

● Made of aluminum

● Rated power : 10W

● Max SPL: 97dB

● Wide Freq.Resp.:140Hz-14kHz

● High sensitivity: 87dB

Features:

● Comply with Dante Network System

● 2 channel amplifiers within one 1U & 19" case

● Two audio inputs, can be added to the existing Dante system

● Two priority inputs and two 100V inputs as audio sources

● 70V/100V speaker output for long distance transfer

● Industrial design for audio project, long term & stable use

MAG808C is 8 zones remote control panel, it has a digital screen and supports  DC24V. This panel has 1 MIC and 1 line input with independent volume control knob respectively.

Features:

● Network port balanced output audio

● Audio signal level indicator

● Partition source control and volume control

● With digital screen & 24VDC power supply

● MP3 play and independent volume control knob

● 1 line input and independent volume control knob

The DSP703 is a coaxial ceiling speaker with a 70v/100v transformer built in. The 70v/100v transmission is realized in a high-voltage, low-current mode, which makes longer distance transmission and parallel connection of multiple loudspeakers possible.

Features:

● Built-in 100v/70v transformer

● In-ceiling type loudspeaker

● 6.5” paper cone driver unit

● Rated power output at 10W-20W

● High sensitivity(90±2dB)

● ABS Ivory White engineering plastic

● Fast installation by spring clip