#door lock problems

The priority of homeowners should be to keep loved ones and valuables secure, but sometimes they pay less attention to door locks before something goes wrong.

If you want to avoid a possible lockout, or lock issues that are costly to repair and may ruin your day, then adhere to the proper maintenance of your door locks.

Here are some common door lock problems that can be an inconvenience and eventually cause expensive lock replacement further down the road.

The key is stock or broken inside the lock

Your key could be stuck due to misaligned door latch or that some components of the lock aren't properly lubricated. If the key is stuck, then forcing it may lead to breaking up the key inside the locks.

We understand that you are low on time and in a hurry to meet up with an appointment. However, if you notice that the key is stuck on the lock, do not force it to open or close; you may end up aggravating the problem.

Call a professional at Access Control Bay Area to help remove the key and repair the locks.

Slow door locks

Stiffened or slow door locks may occur as a result of the accumulation of dirt or dirt on your locks. If you notice that the handle of your lock is slow or it's difficult inserting the key into the lock. You can opt for a DIY procedure by adding a cotton swab into the lock to remove the dirt.

If the lock is not lubricated enough, use a graphite or silicon spray on the lock and never use oil or grease because they can clog during the cold seasons.

Misaligned door latch

In case the door latch does not catch the strike plate you will find it hard shutting or locking your door correctly. This problem may creep up from time to time, and it may be caused by improper flashed or installed hinges, moist weather condition, or warmth.

To repair this issue, you need to see the misalignment and use the right tools to adjust the attack plates and twist the door hinges. When it's not repairable or you don't possess the tools or capacity for a DIY method, phone experts at Access Control Bay Area.

The key turns but doesn’t lock

Little worn or dropped parts can cause the key to turn in this is a mechanical problem and should be fixed by somebody who knows the way the door mechanism works.

On the other hand, if the key refuses to turn as you insert it into the locks, then you need to lubricate the keyhole by spraying graphite.

Faulty door mechanism

Most door problems are mechanical and they become faulty with time and wear. Aged locks may be problematic because of excessive usage, and non-maintenance of these locks can make them defective.

Therefore, mechanical issues of locks must be left for Professionals to handle since it is not worth trying a DIY choice if you don't understand the mechanism of these locks.