#dlink setup wizard

What are the steps if using 192.168.1.1 does not load the D'link router login page for D-Link DIR-615 Wireless-N300 Router?

In case the router’s configuration and login page fail to load, verify that the computer is connected to the router only and not to any other network.

If the problem remains, it means that the D-Link router must have been used by someone else and that user might have modified the default login address. In this situation, you may have to try to reset your D- Link router to its factory default settings. To do so, press and hold the Reset button positioned at the back of the router for about 10 seconds. Now, you have reset the router to its factory default settings by which you will also be able to access the configuration page by visiting the default IP Address 192.168.1.1.

What are the steps for D'link router login?

Open any web browser of your choice on a computer or laptop and enter the default IP address of the router into the address bar, which is 192.168.1.1. If this IP address does not work, you can still, however, log in to your router by entering the URL dlinkrouter.local. After visiting the above IP address or URL dlinkrouter.local, you will automatically get navigated to a D-Link router login page. Enter the default login credentials. The default username is “admin”, and the password domain should be left empty in case of logging into the router’s admin page. Close the D'Link setup wizard only after you have saved the settings.

How to log into the D-Link DIR-825 AC 1200 Wi-Fi Dual-Band Gigabit (LAN/WAN) Router through the domain dlinkrouter.local?

Before you start your login process, keep in mind that you must connect to the router either by a wired or wireless connection. Also, there are two addresses via which you can log into the Admin setup page of your D-Link router that is www.dlinkrouter.local and using the default IP address 192.168.1.1.

How to access the D’link router login page for D-Link DSL-2730U Wireless-N 150 ADSL2+ 4-Port Router?

To access the D-Link router login page, you can go to the web domain http://dlinkrouter.local, or you can also use the default IP address for your router, which is 192.168.1.1. This will direct you to the D'Link setup wizard and you can continue with the on-screen steps.

How to change the D-Link DWR-920V Wireless N300 4G LTE Router’s password?

Follow these steps to change the D‑Link Router login password:

●     Launch any internet browser and enter the default web domain dlinkrouter.local or default IP address 192.168.1.1 into the address bar.

●     Type the password for your Admin account in the password field given. If you have not modified this password from the default, then leave the field blank and click Log In.

●     Most of the D-Link routers have a default user name as admin and password as admin/blank.

●     Determine the Wireless Settings from the drop-down menu list. In the Password section, set the new wireless password for the desired radio band.

●     Your wireless gadgets will demand this password to get access to your wireless network. It may ask you to update your wireless device’s configuration. Tap on the Save button to save your settings.  

How do I set up the D-Link DIR-841 – AC1200 MU-MIMO Wi-Fi for the first time using the Dlink setup wizard?

To set up your D-Link router unplug and remove all the connections with your modem and router and follow the instructions:

●     Join the Ethernet cable from any of the LAN ports of the router with the desktop PC that you desire to utilize to set up your router for the first time.

●     Now, attach the modem into the WAN port of the router. Then, connect the router with a wall power outlet and turn it on.

●     Now, power on the modem, the switch, and the PC. Launch any web browser of your preference on your desktop machine and type www.dlinkrouter.local in the address bar and hit enter.

●     It will automatically take you to the Setup Wizard page in the web browser. If by any chance, the Setup Wizard page doesn’t automatically appear on the browser after typing http://dlinkrouter.local in the address bar, then you can also try using the default IP address of your router in the address bar. And the default IP address of the D-Link routers is 192.168.1.1.

●     Meanwhile, the setup wizard page displays, it will supervise you through a step by step method to configure and set up your D-Link router and support you to connect with the internet.

●     Click on Next to proceed. If you have already configured the router previously, then you will need to reset your router to go through the setup wizard process again.

●     Now, the router will examine the type of internet connection that you own. It will successfully scan and skip the setup itself, but in some circumstances, if it doesn’t, you will be urged to choose the type of internet connection that you have. From the displayed choices, pick the DHCP connection (Dynamic IP).

●     For all the wired associations, the connection type is always Dynamic IP. After choosing the DHCP connection type, click on Next.

●     Now, you will notice a Wireless Settings, and you will get a prompt to set in a new wireless network name and password. It is essential as it will further benefit you in securing your network. Set and enter the desired Network name and password in particular fields. Click on Next.

●     Record the username and passphrase for your wireless network so that the passphrase doesn’t get lost or forgotten. In case, if it gets lost or forgotten, a factory reset will be needed. Now, the Setup Wizard will again request you for a password. It is the password for the router configuration page, not your passphrase. Click on Next.

●     Presently, the setup wizard page will demand you to set your time zone. After setting the time zone, click on Next.

●     A report summary of all your router settings will get revealed. Click on the Save button to apply and save the changes in the settings.

How to configure dlink extender? 

Are you looking for steps to configure dlink wireless extender? Do you need help to log into dlink wifi extender? You can quickly complete dlink wifi extender setup by following some easy and simple steps. You need to reach us through our toll-free number to make the configuration process of dlink extender easier.