What is Leakage Current? ā Complete Technical Guide
Leakage current is an important concept in electrical and electronic engineering. It occurs when a small amount of current flows through a path that is not intended for conduction. In ideal conditions, an insulator or a reverse-biased semiconductor should block current completely. However, in reality, some electrons still manage to flow due to imperfections, material properties, or environmental factors.
Table of Contents
Key Takeaways
What is Leakage Current in Electrical Systems
What Causes Leakage Current?
Leakage Current Formula
Leakage Current in Semiconductor Devices
Measuring Leakage Current ā Leakage Current Tester
How to Stop Leakage Current
Importance of Controlling Leakage Current
Final Thoughts
FAQs
What is Leakage Current? ā Complete Technical Guide
This phenomenon exists in almost all electrical devices and systems. From household appliances to complex industrial machines, leakage current can affect safety, performance, and efficiency. Engineers and technicians must understand how it happens, how to measure it, and how to minimize it.
Leakage current is not always dangerous. In some cases, it is unavoidable and within acceptable limits. But excessive leakage current can cause heating, signal distortion, and even electric shock hazards. Understanding its sources and behavior is essential for designing safe and reliable circuits.
- Leakage current is the unintended flow of current through insulation, semiconductors, or leakage paths.
- It can occur in diodes, transistors, MOSFETs, and other components due to material properties.
- Measuring leakage current with a leakage current tester helps ensure safety and compliance.
- Excessive leakage can cause energy loss, component failure, or electric shocks.
- Reducing leakage current involves proper insulation, quality materials, and circuit design improvements.
Know more about IEC Standard for DGA Analysis
What is Leakage Current in Electrical Systems
Leakage current refers to the small amount of current that flows through an insulating material or unintended path when a voltage is applied. In AC systems, it often flows through the capacitance between conductors and ground. In DC systems, it can result from imperfect insulation or semiconductor junction leakage.
For example, in a device powered from the mains, leakage current can flow from live conductors to the equipmentās chassis through insulation, wiring capacitance, or filters. If a person touches the chassis, the leakage current can pass through their body to ground.
In electronics, leakage current is particularly relevant in semiconductors where reverse bias should ideally block current. Small leakage due to minority carriers and junction imperfections can still occur.
What Causes Leakage Current?
Several factors contribute to leakage current in different systems:
- Insulation degradation: Moisture, heat, or aging can reduce the resistance of insulating materials.
- Capacitive coupling: AC voltage can create displacement current through parasitic capacitances.
- Semiconductor leakage: Imperfections, temperature effects, and minority carrier recombination.
- Surface contamination: Dust, moisture, or conductive residues create leakage paths.
- High temperature: Increases carrier mobility and reduces resistivity.
The magnitude of leakage current depends on voltage, temperature, material properties, and environmental conditions.
Know more about IEC Standard for Battery Charger
Read the full article
